CUB-71: Add mobile-first design system document

Reviewed-on: #31
Reviewed-by: Joshua <joshua@cnjmail.com>

backend/API/Controllers/FilamentsController.cs

@@ -1,6 +1,7 @@
 using Extrudex.API.DTOs;
 using Extrudex.API.DTOs.Filaments;
 using Extrudex.Domain.Entities;
+using Extrudex.Domain.Interfaces;
 using Extrudex.Infrastructure.Data;
 using Microsoft.AspNetCore.Mvc;
 using Microsoft.EntityFrameworkCore;
@@ -17,16 +18,22 @@ namespace Extrudex.API.Controllers;
 public class FilamentsController : ControllerBase
 {
     private readonly ExtrudexDbContext _dbContext;
+    private readonly ILowStockDetector _lowStockDetector;
     private readonly ILogger<FilamentsController> _logger;
 
     /// <summary>
     /// Initializes a new instance of the <see cref="FilamentsController"/> class.
     /// </summary>
     /// <param name="dbContext">The database context for data access.</param>
+    /// <param name="lowStockDetector">The low-stock detection service for filament alerts.</param>
     /// <param name="logger">The logger for diagnostic output.</param>
-    public FilamentsController(ExtrudexDbContext dbContext, ILogger<FilamentsController> logger)
+    public FilamentsController(
+        ExtrudexDbContext dbContext,
+        ILowStockDetector lowStockDetector,
+        ILogger<FilamentsController> logger)
     {
         _dbContext = dbContext;
+        _lowStockDetector = lowStockDetector;
         _logger = logger;
     }
 
@@ -95,7 +102,7 @@ public class FilamentsController : ControllerBase
             .OrderByDescending(s => s.CreatedAt)
             .Skip((pageNumber - 1) * pageSize)
             .Take(pageSize)
-            .Select(s => MapToFilamentResponse(s))
+            .Select(s => MapToFilamentResponse(s, _lowStockDetector))
             .ToListAsync();
 
         var response = new PagedResponse<FilamentResponse>
@@ -136,7 +143,7 @@ public class FilamentsController : ControllerBase
             return NotFound(new { error = $"Filament with ID '{id}' not found." });
         }
 
-        return Ok(MapToFilamentResponse(spool));
+        return Ok(MapToFilamentResponse(spool, _lowStockDetector));
     }
 
     /// <summary>
@@ -211,7 +218,7 @@ public class FilamentsController : ControllerBase
         if (entity.MaterialModifierId.HasValue)
             await _dbContext.Entry(entity).Reference(s => s.MaterialModifier).LoadAsync();
 
-        var response = MapToFilamentResponse(entity);
+        var response = MapToFilamentResponse(entity, _lowStockDetector);
         return CreatedAtAction(nameof(GetFilament), new { id = entity.Id }, response);
     }
 
@@ -292,7 +299,37 @@ public class FilamentsController : ControllerBase
         if (entity.MaterialModifierId.HasValue)
             await _dbContext.Entry(entity).Reference(s => s.MaterialModifier).LoadAsync();
 
-        return Ok(MapToFilamentResponse(entity));
+        return Ok(MapToFilamentResponse(entity, _lowStockDetector));
+    }
+
+    /// <summary>
+    /// Gets only the filament spools that are flagged as low stock.
+    /// A spool is considered low stock when its remaining weight percentage
+    /// is at or below the configured threshold.
+    /// </summary>
+    /// <returns>A list of low-stock filament spools with alert metadata.</returns>
+    /// <response code="200">Returns the list of low-stock filament spools.</response>
+    [HttpGet("low-stock")]
+    [ProducesResponseType(typeof(List<FilamentResponse>), StatusCodes.Status200OK)]
+    public async Task<ActionResult<List<FilamentResponse>>> GetLowStockFilaments()
+    {
+        _logger.LogDebug("Getting low-stock filaments (threshold: {Threshold}%)",
+            _lowStockDetector.LowStockThresholdPercent);
+
+        var spools = await _dbContext.Spools
+            .Include(s => s.MaterialBase)
+            .Include(s => s.MaterialFinish)
+            .Include(s => s.MaterialModifier)
+            .Where(s => s.IsActive)
+            .OrderByDescending(s => s.CreatedAt)
+            .ToListAsync();
+
+        var lowStockItems = spools
+            .Where(s => _lowStockDetector.IsLowStock(s.WeightRemainingGrams, s.WeightTotalGrams))
+            .Select(s => MapToFilamentResponse(s, _lowStockDetector))
+            .ToList();
+
+        return Ok(lowStockItems);
     }
 
     /// <summary>
@@ -361,10 +398,12 @@ public class FilamentsController : ControllerBase
     /// Maps a Spool domain entity to a FilamentResponse DTO.
     /// Denormalizes material names for display convenience.
     /// Populates the QrCodeUrl for easy frontend access to the spool's QR code.
+    /// Calculates low-stock status and remaining weight percentage.
     /// </summary>
     /// <param name="s">The spool entity to map.</param>
-    /// <returns>A FilamentResponse DTO with denormalized material names and QR code URL.</returns>
+    /// <param name="lowStockDetector">The low-stock detection service for computing alert flags.</param>
-    private static FilamentResponse MapToFilamentResponse(Spool s) => new()
+    /// <returns>A FilamentResponse DTO with denormalized material names, QR code URL, and low-stock metadata.</returns>
+    private static FilamentResponse MapToFilamentResponse(Spool s, ILowStockDetector lowStockDetector) => new()
     {
         Id = s.Id,
         MaterialBaseId = s.MaterialBaseId,
@@ -387,6 +426,8 @@ public class FilamentsController : ControllerBase
         StorageLocation = s.StorageLocation,
         CreatedAt = s.CreatedAt,
         UpdatedAt = s.UpdatedAt,
-        QrCodeUrl = $"/api/qr/spool/{s.Id}"
+        QrCodeUrl = $"/api/qr/spool/{s.Id}",
+        IsLowStock = lowStockDetector.IsLowStock(s.WeightRemainingGrams, s.WeightTotalGrams),
+        RemainingWeightPercent = lowStockDetector.GetRemainingWeightPercent(s.WeightRemainingGrams, s.WeightTotalGrams)
     };
 }

backend/API/Controllers/UsageLogsController.cs

@@ -0,0 +1,117 @@
+using Extrudex.API.DTOs.UsageLogs;
+using Extrudex.Domain.Enums;
+using Extrudex.Domain.Interfaces;
+using Microsoft.AspNetCore.Mvc;
+
+namespace Extrudex.API.Controllers;
+
+/// <summary>
+/// API controller for recording and querying filament usage logs.
+/// Usage logs provide a fine-grained audit trail of filament consumption
+/// from printer integrations or manual input.
+/// </summary>
+[ApiController]
+[Route("api/[controller]")]
+[Produces("application/json")]
+public class UsageLogsController : ControllerBase
+{
+    private readonly IUsageLogService _usageLogService;
+
+    /// <summary>
+    /// Initializes a new instance of the <see cref="UsageLogsController"/> class.
+    /// </summary>
+    /// <param name="usageLogService">The usage log service for recording and querying usage.</param>
+    public UsageLogsController(IUsageLogService usageLogService)
+    {
+        _usageLogService = usageLogService;
+    }
+
+    /// <summary>
+    /// Records a new filament usage entry.
+    /// </summary>
+    /// <param name="request">The usage entry details.</param>
+    /// <returns>The created usage log entry.</returns>
+    [HttpPost]
+    [ProducesResponseType(typeof(UsageLogResponse), StatusCodes.Status201Created)]
+    [ProducesResponseType(StatusCodes.Status400BadRequest)]
+    public async Task<ActionResult<UsageLogResponse>> Create([FromBody] CreateUsageLogRequest request)
+    {
+        if (!Enum.TryParse<DataSource>(request.DataSource, ignoreCase: true, out var dataSource))
+        {
+            return BadRequest($"Invalid data source: '{request.DataSource}'. Valid values: Mqtt, Moonraker, Manual.");
+        }
+
+        var entry = await _usageLogService.RecordUsageAsync(
+            spoolId: request.SpoolId,
+            gramsUsed: request.GramsUsed,
+            dataSource: dataSource,
+            printerId: request.PrinterId,
+            printJobId: request.PrintJobId,
+            mmExtruded: request.MmExtruded,
+            usageTimestamp: request.UsageTimestamp,
+            notes: request.Notes
+        );
+
+        return CreatedAtAction(
+            nameof(GetBySpool),
+            new { spoolId = entry.SpoolId },
+            MapToResponse(entry));
+    }
+
+    /// <summary>
+    /// Gets usage logs for a specific spool, ordered by most recent first.
+    /// </summary>
+    /// <param name="spoolId">The spool ID to filter by.</param>
+    /// <returns>A collection of usage log entries for the spool.</returns>
+    [HttpGet("spool/{spoolId:guid}")]
+    [ProducesResponseType(typeof(IEnumerable<UsageLogResponse>), StatusCodes.Status200OK)]
+    public async Task<ActionResult<IEnumerable<UsageLogResponse>>> GetBySpool(Guid spoolId)
+    {
+        var logs = await _usageLogService.GetBySpoolAsync(spoolId);
+        return Ok(logs.Select(MapToResponse));
+    }
+
+    /// <summary>
+    /// Gets usage logs for a specific printer, ordered by most recent first.
+    /// </summary>
+    /// <param name="printerId">The printer ID to filter by.</param>
+    /// <returns>A collection of usage log entries for the printer.</returns>
+    [HttpGet("printer/{printerId:guid}")]
+    [ProducesResponseType(typeof(IEnumerable<UsageLogResponse>), StatusCodes.Status200OK)]
+    public async Task<ActionResult<IEnumerable<UsageLogResponse>>> GetByPrinter(Guid printerId)
+    {
+        var logs = await _usageLogService.GetByPrinterAsync(printerId);
+        return Ok(logs.Select(MapToResponse));
+    }
+
+    /// <summary>
+    /// Gets usage logs for a specific print job, ordered by most recent first.
+    /// </summary>
+    /// <param name="printJobId">The print job ID to filter by.</param>
+    /// <returns>A collection of usage log entries for the print job.</returns>
+    [HttpGet("print-job/{printJobId:guid}")]
+    [ProducesResponseType(typeof(IEnumerable<UsageLogResponse>), StatusCodes.Status200OK)]
+    public async Task<ActionResult<IEnumerable<UsageLogResponse>>> GetByPrintJob(Guid printJobId)
+    {
+        var logs = await _usageLogService.GetByPrintJobAsync(printJobId);
+        return Ok(logs.Select(MapToResponse));
+    }
+
+    /// <summary>
+    /// Maps a UsageLog domain entity to a UsageLogResponse DTO.
+    /// </summary>
+    private static UsageLogResponse MapToResponse(Domain.Entities.UsageLog log) => new()
+    {
+        Id = log.Id,
+        SpoolId = log.SpoolId,
+        PrinterId = log.PrinterId,
+        PrintJobId = log.PrintJobId,
+        GramsUsed = log.GramsUsed,
+        MmExtruded = log.MmExtruded,
+        UsageTimestamp = log.UsageTimestamp,
+        DataSource = log.DataSource.ToString(),
+        Notes = log.Notes,
+        CreatedAt = log.CreatedAt,
+        UpdatedAt = log.UpdatedAt
+    };
+}

backend/API/DTOs/Filaments/FilamentDtos.cs

@@ -76,6 +76,19 @@ public class FilamentResponse
     /// Encodes a deep link to the spool's detail page.
     /// </summary>
     public string QrCodeUrl { get; set; } = string.Empty;
+
+    /// <summary>
+    /// Whether this spool is flagged as low stock — remaining weight is at or
+    /// below the configured low-stock threshold percentage.
+    /// Useful for UI alerts and inventory dashboards.
+    /// </summary>
+    public bool IsLowStock { get; set; }
+
+    /// <summary>
+    /// Remaining filament weight as a percentage of total weight (0–100).
+    /// Rounded to one decimal place. Returns 0 if total weight is zero.
+    /// </summary>
+    public decimal RemainingWeightPercent { get; set; }
 }
 
 /// <summary>

backend/API/DTOs/UsageLogs/UsageLogDtos.cs

@@ -0,0 +1,115 @@
+using System.ComponentModel.DataAnnotations;
+
+namespace Extrudex.API.DTOs.UsageLogs;
+
+/// <summary>
+/// Request DTO for recording a filament usage entry.
+/// </summary>
+public class CreateUsageLogRequest
+{
+    /// <summary>
+    /// The ID of the spool that provided the filament.
+    /// </summary>
+    [Required]
+    public Guid SpoolId { get; set; }
+
+    /// <summary>
+    /// The number of grams of filament consumed.
+    /// </summary>
+    [Required]
+    [Range(0.01, double.MaxValue, ErrorMessage = "GramsUsed must be a positive value.")]
+    public decimal GramsUsed { get; set; }
+
+    /// <summary>
+    /// The source of the usage data (Mqtt, Moonraker, Manual).
+    /// </summary>
+    [Required]
+    public string DataSource { get; set; } = string.Empty;
+
+    /// <summary>
+    /// The ID of the printer that consumed the filament. Optional.
+    /// </summary>
+    public Guid? PrinterId { get; set; }
+
+    /// <summary>
+    /// The ID of the print job associated with this usage. Optional.
+    /// </summary>
+    public Guid? PrintJobId { get; set; }
+
+    /// <summary>
+    /// The number of millimeters of filament extruded. Optional.
+    /// </summary>
+    public decimal? MmExtruded { get; set; }
+
+    /// <summary>
+    /// When the usage occurred (UTC). Defaults to now if not specified.
+    /// </summary>
+    public DateTime? UsageTimestamp { get; set; }
+
+    /// <summary>
+    /// Optional notes about this usage entry.
+    /// </summary>
+    [MaxLength(2000)]
+    public string? Notes { get; set; }
+}
+
+/// <summary>
+/// Response DTO for a usage log entry.
+/// </summary>
+public class UsageLogResponse
+{
+    /// <summary>
+    /// Unique identifier for the usage log entry.
+    /// </summary>
+    public Guid Id { get; set; }
+
+    /// <summary>
+    /// The spool that provided the filament.
+    /// </summary>
+    public Guid SpoolId { get; set; }
+
+    /// <summary>
+    /// The printer that consumed the filament, if applicable.
+    /// </summary>
+    public Guid? PrinterId { get; set; }
+
+    /// <summary>
+    /// The print job associated with this usage, if applicable.
+    /// </summary>
+    public Guid? PrintJobId { get; set; }
+
+    /// <summary>
+    /// Grams of filament consumed.
+    /// </summary>
+    public decimal GramsUsed { get; set; }
+
+    /// <summary>
+    /// Millimeters of filament extruded, if available.
+    /// </summary>
+    public decimal? MmExtruded { get; set; }
+
+    /// <summary>
+    /// When the usage occurred (UTC).
+    /// </summary>
+    public DateTime UsageTimestamp { get; set; }
+
+    /// <summary>
+    /// Source of the usage data (Mqtt, Moonraker, Manual).
+    /// </summary>
+    public string DataSource { get; set; } = string.Empty;
+
+    /// <summary>
+    /// Optional notes about this usage entry.
+    /// </summary>
+    public string? Notes { get; set; }
+
+    /// <summary>
+    /// When the record was created (UTC).
+    /// </summary>
+    public DateTime CreatedAt { get; set; }
+
+    /// <summary>
+    /// When the record was last updated (UTC).
+    /// </summary>
+    public DateTime UpdatedAt { get; set; }
+}

backend/Domain/Entities/UsageLog.cs

@@ -0,0 +1,72 @@
+using Extrudex.Domain.Base;
+using Extrudex.Domain.Enums;
+
+namespace Extrudex.Domain.Entities;
+
+/// <summary>
+/// Represents a single filament usage log entry. Records how much filament
+/// was consumed, by which printer, at what time, and optionally linked to
+/// a print job. This provides a fine-grained audit trail of filament consumption
+/// independent of print job lifecycle.
+/// </summary>
+public class UsageLog : AuditableEntity
+{
+    /// <summary>
+    /// Foreign key to the spool that provided the filament.
+    /// </summary>
+    public Guid SpoolId { get; set; }
+
+    /// <summary>
+    /// Navigation to the spool that provided the filament.
+    /// </summary>
+    public Spool Spool { get; set; } = null!;
+
+    /// <summary>
+    /// Foreign key to the printer that consumed the filament.
+    /// Nullable to support manual entries without a specific printer.
+    /// </summary>
+    public Guid? PrinterId { get; set; }
+
+    /// <summary>
+    /// Navigation to the printer that consumed the filament.
+    /// </summary>
+    public Printer? Printer { get; set; }
+
+    /// <summary>
+    /// Foreign key to the print job associated with this usage entry.
+    /// Nullable because usage can be logged before or without a print job.
+    /// </summary>
+    public Guid? PrintJobId { get; set; }
+
+    /// <summary>
+    /// Navigation to the print job associated with this usage entry.
+    /// </summary>
+    public PrintJob? PrintJob { get; set; }
+
+    /// <summary>
+    /// The number of grams of filament consumed in this usage event.
+    /// </summary>
+    public decimal GramsUsed { get; set; }
+
+    /// <summary>
+    /// The number of millimeters of filament extruded in this usage event.
+    /// Optional — may not be available for all data sources.
+    /// </summary>
+    public decimal? MmExtruded { get; set; }
+
+    /// <summary>
+    /// Timestamp when the usage occurred (UTC). This is the actual time of
+    /// consumption, which may differ from CreatedAt if the entry was recorded later.
+    /// </summary>
+    public DateTime UsageTimestamp { get; set; } = DateTime.UtcNow;
+
+    /// <summary>
+    /// The source of the usage data (which integration path provided it).
+    /// </summary>
+    public DataSource DataSource { get; set; } = DataSource.Manual;
+
+    /// <summary>
+    /// Optional notes about this usage entry.
+    /// </summary>
+    public string? Notes { get; set; }
+}

backend/Domain/Interfaces/IFilamentUsageService.cs

@@ -0,0 +1,50 @@
+using Extrudex.Domain.Entities;
+
+namespace Extrudex.Domain.Interfaces;
+
+/// <summary>
+/// Service for persisting and querying filament usage records.
+/// Tracks consumption per print job and per spool for COGS and inventory tracking.
+/// </summary>
+public interface IFilamentUsageService
+{
+    /// <summary>
+    /// Records a new filament usage entry for a print job.
+    /// </summary>
+    /// <param name="printJobId">The print job that consumed the filament.</param>
+    /// <param name="spoolId">The spool that provided the filament.</param>
+    /// <param name="printerId">The printer that executed the print.</param>
+    /// <param name="gramsUsed">Grams of filament consumed.</param>
+    /// <param name="mmExtruded">Millimeters of filament extruded.</param>
+    /// <param name="notes">Optional notes about this usage record.</param>
+    /// <param name="cancellationToken">Cancellation token.</param>
+    /// <returns>The created FilamentUsage entity.</returns>
+    Task<FilamentUsage> RecordUsageAsync(
+        Guid printJobId,
+        Guid spoolId,
+        Guid printerId,
+        decimal gramsUsed,
+        decimal mmExtruded,
+        string? notes = null,
+        CancellationToken cancellationToken = default);
+
+    /// <summary>
+    /// Retrieves all filament usage records for a specific print job.
+    /// </summary>
+    /// <param name="printJobId">The print job ID.</param>
+    /// <param name="cancellationToken">Cancellation token.</param>
+    /// <returns>Collection of filament usage records for the print job.</returns>
+    Task<IReadOnlyList<FilamentUsage>> GetByPrintJobAsync(
+        Guid printJobId,
+        CancellationToken cancellationToken = default);
+
+    /// <summary>
+    /// Retrieves all filament usage records for a specific spool.
+    /// </summary>
+    /// <param name="spoolId">The spool ID.</param>
+    /// <param name="cancellationToken">Cancellation token.</param>
+    /// <returns>Collection of filament usage records for the spool.</returns>
+    Task<IReadOnlyList<FilamentUsage>> GetBySpoolAsync(
+        Guid spoolId,
+        CancellationToken cancellationToken = default);
+}

backend/Domain/Interfaces/ILowStockDetector.cs

@@ -0,0 +1,39 @@
+namespace Extrudex.Domain.Interfaces;
+
+/// <summary>
+/// Detects low-stock filament spools based on configurable weight thresholds.
+/// Determines whether a spool's remaining filament falls below a critical level
+/// so that alerts and API flags can be surfaced to the user.
+/// </summary>
+public interface ILowStockDetector
+{
+    /// <summary>
+    /// Determines whether a spool is considered low stock based on its remaining
+    /// weight relative to its total weight and the configured threshold percentage.
+    /// </summary>
+    /// <param name="weightRemainingGrams">The current remaining weight in grams.</param>
+    /// <param name="weightTotalGrams">The total spool weight in grams when full.</param>
+    /// <returns>
+    /// <c>true</c> if the remaining weight percentage is at or below the configured
+    /// low-stock threshold; <c>false</c> otherwise. Returns <c>false</c> for spools
+    /// with zero total weight to avoid division-by-zero.
+    /// </returns>
+    bool IsLowStock(decimal weightRemainingGrams, decimal weightTotalGrams);
+
+    /// <summary>
+    /// Calculates the remaining weight as a percentage of total weight.
+    /// </summary>
+    /// <param name="weightRemainingGrams">The current remaining weight in grams.</param>
+    /// <param name="weightTotalGrams">The total spool weight in grams when full.</param>
+    /// <returns>
+    /// A value between 0 and 100 representing the percentage of filament remaining.
+    /// Returns 0 if total weight is zero to avoid division-by-zero.
+    /// </returns>
+    decimal GetRemainingWeightPercent(decimal weightRemainingGrams, decimal weightTotalGrams);
+
+    /// <summary>
+    /// Gets the currently configured low-stock threshold percentage.
+    /// Useful for API responses so clients know what threshold is in effect.
+    /// </summary>
+    decimal LowStockThresholdPercent { get; }
+}

backend/Domain/Interfaces/IUsageLogService.cs

@@ -0,0 +1,57 @@
+using Extrudex.Domain.Entities;
+using Extrudex.Domain.Enums;
+
+namespace Extrudex.Domain.Interfaces;
+
+/// <summary>
+/// Service for recording filament usage entries. Writes to the usage_logs table
+/// and provides query capabilities for usage history.
+/// </summary>
+public interface IUsageLogService
+{
+    /// <summary>
+    /// Records a filament usage entry.
+    /// </summary>
+    /// <param name="spoolId">The spool that provided the filament.</param>
+    /// <param name="gramsUsed">Grams of filament consumed.</param>
+    /// <param name="dataSource">Where the data came from.</param>
+    /// <param name="printerId">Optional printer ID.</param>
+    /// <param name="printJobId">Optional print job ID.</param>
+    /// <param name="mmExtruded">Optional mm extruded.</param>
+    /// <param name="usageTimestamp">When the usage occurred (defaults to UTC now).</param>
+    /// <param name="notes">Optional notes.</param>
+    /// <returns>The created UsageLog entity.</returns>
+    Task<UsageLog> RecordUsageAsync(
+        Guid spoolId,
+        decimal gramsUsed,
+        DataSource dataSource,
+        Guid? printerId = null,
+        Guid? printJobId = null,
+        decimal? mmExtruded = null,
+        DateTime? usageTimestamp = null,
+        string? notes = null);
+
+    /// <summary>
+    /// Retrieves usage logs for a specific spool, ordered by usage timestamp descending.
+    /// </summary>
+    /// <param name="spoolId">The spool ID to filter by.</param>
+    /// <param name="cancellationToken">Cancellation token.</param>
+    /// <returns>A collection of usage logs for the spool.</returns>
+    Task<IEnumerable<UsageLog>> GetBySpoolAsync(Guid spoolId, CancellationToken cancellationToken = default);
+
+    /// <summary>
+    /// Retrieves usage logs for a specific printer, ordered by usage timestamp descending.
+    /// </summary>
+    /// <param name="printerId">The printer ID to filter by.</param>
+    /// <param name="cancellationToken">Cancellation token.</param>
+    /// <returns>A collection of usage logs for the printer.</returns>
+    Task<IEnumerable<UsageLog>> GetByPrinterAsync(Guid printerId, CancellationToken cancellationToken = default);
+
+    /// <summary>
+    /// Retrieves usage logs for a specific print job, ordered by usage timestamp descending.
+    /// </summary>
+    /// <param name="printJobId">The print job ID to filter by.</param>
+    /// <param name="cancellationToken">Cancellation token.</param>
+    /// <returns>A collection of usage logs for the print job.</returns>
+    Task<IEnumerable<UsageLog>> GetByPrintJobAsync(Guid printJobId, CancellationToken cancellationToken = default);
+}

backend/Infrastructure/Data/Configurations/UsageLogConfiguration.cs

@@ -0,0 +1,91 @@
+using Extrudex.Domain.Entities;
+using Extrudex.Domain.Enums;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.EntityFrameworkCore.Metadata.Builders;
+
+namespace Extrudex.Infrastructure.Data.Configurations;
+
+/// <summary>
+/// EF Core configuration for the UsageLog entity.
+/// Maps to the usage_logs table with snake_case columns and appropriate indexes.
+/// </summary>
+public class UsageLogConfiguration : BaseEntityConfiguration<UsageLog>
+{
+    /// <inheritdoc/>
+    public override void Configure(EntityTypeBuilder<UsageLog> builder)
+    {
+        base.Configure(builder);
+
+        builder.Property(e => e.SpoolId)
+            .HasColumnName("spool_id")
+            .IsRequired();
+
+        builder.Property(e => e.PrinterId)
+            .HasColumnName("printer_id");
+
+        builder.Property(e => e.PrintJobId)
+            .HasColumnName("print_job_id");
+
+        builder.Property(e => e.GramsUsed)
+            .HasColumnName("grams_used")
+            .HasPrecision(10, 2)
+            .IsRequired();
+
+        builder.Property(e => e.MmExtruded)
+            .HasColumnName("mm_extruded")
+            .HasPrecision(12, 2);
+
+        builder.Property(e => e.UsageTimestamp)
+            .HasColumnName("usage_timestamp")
+            .IsRequired();
+
+        builder.Property(e => e.DataSource)
+            .HasColumnName("data_source")
+            .HasConversion<string>()
+            .HasMaxLength(50)
+            .IsRequired();
+
+        builder.Property(e => e.Notes)
+            .HasColumnName("notes")
+            .HasMaxLength(2000);
+
+        // Index on spool_id for querying usage by spool
+        builder.HasIndex(e => e.SpoolId)
+            .HasDatabaseName("ix_usage_logs_spool_id");
+
+        // Index on printer_id for querying usage by printer
+        builder.HasIndex(e => e.PrinterId)
+            .HasDatabaseName("ix_usage_logs_printer_id");
+
+        // Index on print_job_id for querying usage by print job
+        builder.HasIndex(e => e.PrintJobId)
+            .HasDatabaseName("ix_usage_logs_print_job_id");
+
+        // Index on usage_timestamp for chronological queries
+        builder.HasIndex(e => e.UsageTimestamp)
+            .HasDatabaseName("ix_usage_logs_usage_timestamp");
+
+        // Index on data_source for filtering by integration path
+        builder.HasIndex(e => e.DataSource)
+            .HasDatabaseName("ix_usage_logs_data_source");
+
+        // Relationships
+        builder.HasOne(e => e.Spool)
+            .WithMany()
+            .HasForeignKey(e => e.SpoolId)
+            .HasConstraintName("fk_usage_logs_spool")
+            .OnDelete(DeleteBehavior.Restrict);
+
+        builder.HasOne(e => e.Printer)
+            .WithMany()
+            .HasForeignKey(e => e.PrinterId)
+            .HasConstraintName("fk_usage_logs_printer")
+            .OnDelete(DeleteBehavior.SetNull);
+
+        builder.HasOne(e => e.PrintJob)
+            .WithMany()
+            .HasForeignKey(e => e.PrintJobId)
+            .HasConstraintName("fk_usage_logs_print_job")
+            .OnDelete(DeleteBehavior.SetNull);
+    }
+}

backend/Infrastructure/Data/ExtrudexDbContext.cs

@@ -24,6 +24,7 @@ public class ExtrudexDbContext : DbContext
     public DbSet<AmsSlot> AmsSlots => Set<AmsSlot>();
     public DbSet<PrintJob> PrintJobs => Set<PrintJob>();
     public DbSet<FilamentUsage> FilamentUsages => Set<FilamentUsage>();
+    public DbSet<UsageLog> UsageLogs => Set<UsageLog>();
 
     protected override void OnModelCreating(ModelBuilder modelBuilder)
     {

backend/Infrastructure/Data/Migrations/20260426184329_AddUsageLogTable.cs

@@ -0,0 +1,534 @@
+using System;
+using Microsoft.EntityFrameworkCore.Migrations;
+
+#nullable disable
+
+namespace Extrudex.Infrastructure.Data.Migrations
+{
+    /// <inheritdoc />
+    public partial class AddUsageLogTable : Migration
+    {
+        /// <inheritdoc />
+        protected override void Up(MigrationBuilder migrationBuilder)
+        {
+            migrationBuilder.CreateTable(
+                name: "usage_logs",
+                columns: table => new
+                {
+                    id = table.Column<Guid>(type: "uuid", nullable: false),
+                    spool_id = table.Column<Guid>(type: "uuid", nullable: false),
+                    printer_id = table.Column<Guid>(type: "uuid", nullable: true),
+                    print_job_id = table.Column<Guid>(type: "uuid", nullable: true),
+                    grams_used = table.Column<decimal>(type: "numeric(10,2)", precision: 10, scale: 2, nullable: false),
+                    mm_extruded = table.Column<decimal>(type: "numeric(12,2)", precision: 12, scale: 2, nullable: true),
+                    usage_timestamp = table.Column<DateTime>(type: "timestamp with time zone", nullable: false),
+                    data_source = table.Column<string>(type: "character varying(50)", maxLength: 50, nullable: false),
+                    notes = table.Column<string>(type: "character varying(2000)", maxLength: 2000, nullable: true),
+                    created_at = table.Column<DateTime>(type: "timestamp with time zone", nullable: false, defaultValueSql: "now() at time zone 'utc'"),
+                    updated_at = table.Column<DateTime>(type: "timestamp with time zone", nullable: false, defaultValueSql: "now() at time zone 'utc'")
+                },
+                constraints: table =>
+                {
+                    table.PrimaryKey("PK_usage_logs", x => x.id);
+                    table.ForeignKey(
+                        name: "fk_usage_logs_print_job",
+                        column: x => x.print_job_id,
+                        principalTable: "print_jobs",
+                        principalColumn: "id",
+                        onDelete: ReferentialAction.SetNull);
+                    table.ForeignKey(
+                        name: "fk_usage_logs_printer",
+                        column: x => x.printer_id,
+                        principalTable: "printers",
+                        principalColumn: "id",
+                        onDelete: ReferentialAction.SetNull);
+                    table.ForeignKey(
+                        name: "fk_usage_logs_spool",
+                        column: x => x.spool_id,
+                        principalTable: "spools",
+                        principalColumn: "id",
+                        onDelete: ReferentialAction.Restrict);
+                });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000001"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(6535), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(6535) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000002"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7016), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7016) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000003"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7027), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7028) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000004"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7034), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7035) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000005"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7042), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7042) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000006"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7049), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7049) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000001"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7291), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7292) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000002"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7453), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7453) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000003"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7461), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7461) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000004"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7468), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7468) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000005"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7474), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7474) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000006"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7480), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7481) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000007"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7487), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7487) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000008"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7493), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7493) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000009"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7500), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7500) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000010"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7507), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7507) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000011"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7513), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7513) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000012"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7519), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7520) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000013"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7526), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7526) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000014"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7532), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7532) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000015"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7538), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7539) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000001"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7690), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7690) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000002"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7838), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7838) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000003"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7846), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7846) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000004"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7853), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7853) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000005"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7859), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7859) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000006"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7865), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7866) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000007"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7872), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7872) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000008"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7878), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7879) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000009"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7885), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7885) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000010"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7891), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7891) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000011"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7898), new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7898) });
+
+            migrationBuilder.CreateIndex(
+                name: "ix_usage_logs_data_source",
+                table: "usage_logs",
+                column: "data_source");
+
+            migrationBuilder.CreateIndex(
+                name: "ix_usage_logs_print_job_id",
+                table: "usage_logs",
+                column: "print_job_id");
+
+            migrationBuilder.CreateIndex(
+                name: "ix_usage_logs_printer_id",
+                table: "usage_logs",
+                column: "printer_id");
+
+            migrationBuilder.CreateIndex(
+                name: "ix_usage_logs_spool_id",
+                table: "usage_logs",
+                column: "spool_id");
+
+            migrationBuilder.CreateIndex(
+                name: "ix_usage_logs_usage_timestamp",
+                table: "usage_logs",
+                column: "usage_timestamp");
+        }
+
+        /// <inheritdoc />
+        protected override void Down(MigrationBuilder migrationBuilder)
+        {
+            migrationBuilder.DropTable(
+                name: "usage_logs");
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000001"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1096), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1096) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000002"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1620), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1620) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000003"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1630), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1630) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000004"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1638), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1638) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000005"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1645), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1645) });
+
+            migrationBuilder.UpdateData(
+                table: "material_bases",
+                keyColumn: "id",
+                keyValue: new Guid("10000000-0000-0000-0000-000000000006"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1651), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1652) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000001"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1850), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(1850) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000002"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2041), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2041) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000003"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2049), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2049) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000004"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2055), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2056) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000005"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2062), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2062) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000006"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2068), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2068) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000007"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2075), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2075) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000008"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2081), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2081) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000009"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2100), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2100) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000010"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2107), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2107) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000011"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2113), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2113) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000012"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2120), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2120) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000013"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2126), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2126) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000014"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2132), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2133) });
+
+            migrationBuilder.UpdateData(
+                table: "material_finishes",
+                keyColumn: "id",
+                keyValue: new Guid("20000000-0000-0000-0000-000000000015"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2139), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2139) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000001"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2304), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2304) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000002"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2463), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2463) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000003"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2471), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2471) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000004"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2477), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2478) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000005"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2484), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2484) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000006"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2490), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2491) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000007"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2497), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2497) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000008"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2503), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2503) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000009"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2510), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2510) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000010"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2516), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2516) });
+
+            migrationBuilder.UpdateData(
+                table: "material_modifiers",
+                keyColumn: "id",
+                keyValue: new Guid("30000000-0000-0000-0000-000000000011"),
+                columns: new[] { "created_at", "updated_at" },
+                values: new object[] { new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2522), new DateTime(2026, 4, 26, 13, 14, 18, 745, DateTimeKind.Utc).AddTicks(2523) });
+        }
+    }
+}

backend/Infrastructure/Data/Migrations/ExtrudexDbContextModelSnapshot.cs

@@ -104,77 +104,6 @@ namespace Extrudex.Infrastructure.Data.Migrations
                     b.ToTable("ams_units", (string)null);
                 });
 
-            modelBuilder.Entity("Extrudex.Domain.Entities.FilamentUsage", b =>
-                {
-                    b.Property<Guid>("Id")
-                        .HasColumnType("uuid")
-                        .HasColumnName("id");
-
-                    b.Property<DateTime>("CreatedAt")
-                        .ValueGeneratedOnAdd()
-                        .HasColumnType("timestamp with time zone")
-                        .HasColumnName("created_at")
-                        .HasDefaultValueSql("now() at time zone 'utc'");
-
-                    b.Property<decimal>("GramsUsed")
-                        .HasPrecision(10, 2)
-                        .HasColumnType("numeric(10,2)")
-                        .HasColumnName("grams_used");
-
-                    b.Property<decimal>("MmExtruded")
-                        .HasPrecision(12, 2)
-                        .HasColumnType("numeric(12,2)")
-                        .HasColumnName("mm_extruded");
-
-                    b.Property<string>("Notes")
-                        .HasMaxLength(2000)
-                        .HasColumnType("character varying(2000)")
-                        .HasColumnName("notes");
-
-                    b.Property<Guid>("PrintJobId")
-                        .HasColumnType("uuid")
-                        .HasColumnName("print_job_id");
-
-                    b.Property<Guid>("PrinterId")
-                        .HasColumnType("uuid")
-                        .HasColumnName("printer_id");
-
-                    b.Property<DateTime>("RecordedAt")
-                        .ValueGeneratedOnAdd()
-                        .HasColumnType("timestamp with time zone")
-                        .HasColumnName("recorded_at")
-                        .HasDefaultValueSql("now() at time zone 'utc'");
-
-                    b.Property<Guid>("SpoolId")
-                        .HasColumnType("uuid")
-                        .HasColumnName("spool_id");
-
-                    b.Property<DateTime>("UpdatedAt")
-                        .ValueGeneratedOnAdd()
-                        .HasColumnType("timestamp with time zone")
-                        .HasColumnName("updated_at")
-                        .HasDefaultValueSql("now() at time zone 'utc'");
-
-                    b.HasKey("Id");
-
-                    b.HasIndex("PrintJobId")
-                        .HasDatabaseName("ix_filament_usages_print_job_id");
-
-                    b.HasIndex("PrinterId")
-                        .HasDatabaseName("ix_filament_usages_printer_id");
-
-                    b.HasIndex("RecordedAt")
-                        .HasDatabaseName("ix_filament_usages_recorded_at");
-
-                    b.HasIndex("SpoolId")
-                        .HasDatabaseName("ix_filament_usages_spool_id");
-
-                    b.HasIndex("SpoolId", "RecordedAt")
-                        .HasDatabaseName("ix_filament_usages_spool_id_recorded_at");
-
-                    b.ToTable("filament_usages", (string)null);
-                });
-
             modelBuilder.Entity("Extrudex.Domain.Entities.MaterialBase", b =>
                 {
                     b.Property<Guid>("Id")
@@ -216,50 +145,50 @@ namespace Extrudex.Infrastructure.Data.Migrations
                         new
                         {
                             Id = new Guid("10000000-0000-0000-0000-000000000001"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9388),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(6535),
                             DensityGperCm3 = 1.24m,
                             Name = "PLA",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9388)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(6535)
                         },
                         new
                         {
                             Id = new Guid("10000000-0000-0000-0000-000000000002"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9871),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7016),
                             DensityGperCm3 = 1.27m,
                             Name = "PETG",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9871)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7016)
                         },
                         new
                         {
                             Id = new Guid("10000000-0000-0000-0000-000000000003"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9881),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7027),
                             DensityGperCm3 = 1.04m,
                             Name = "ABS",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9881)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7028)
                         },
                         new
                         {
                             Id = new Guid("10000000-0000-0000-0000-000000000004"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9888),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7034),
                             DensityGperCm3 = 1.07m,
                             Name = "ASA",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9888)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7035)
                         },
                         new
                         {
                             Id = new Guid("10000000-0000-0000-0000-000000000005"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9895),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7042),
                             DensityGperCm3 = 1.21m,
                             Name = "TPU",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9895)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7042)
                         },
                         new
                         {
                             Id = new Guid("10000000-0000-0000-0000-000000000006"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9901),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7049),
                             DensityGperCm3 = 1.14m,
                             Name = "Nylon",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 291, DateTimeKind.Utc).AddTicks(9902)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7049)
                         });
                 });
 
@@ -303,122 +232,122 @@ namespace Extrudex.Infrastructure.Data.Migrations
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000001"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(90),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7291),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Basic",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(90)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7292)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000002"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(251),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7453),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Matte",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(251)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7453)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000003"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(259),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7461),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Silk",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(259)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7461)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000004"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(266),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7468),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Glitter",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(266)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7468)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000005"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(272),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7474),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Marble",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(272)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7474)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000006"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(278),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7480),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Sparkle",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(278)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7481)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000007"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(285),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7487),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000002"),
                             Name = "Basic",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(285)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7487)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000008"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(291),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7493),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000002"),
                             Name = "Matte",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(291)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7493)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000009"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(297),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7500),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000002"),
                             Name = "Silk",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(298)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7500)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000010"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(304),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7507),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000003"),
                             Name = "Basic",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(304)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7507)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000011"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(310),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7513),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000003"),
                             Name = "Matte",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(310)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7513)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000012"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(316),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7519),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000004"),
                             Name = "Basic",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(317)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7520)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000013"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(323),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7526),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000004"),
                             Name = "Matte",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(323)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7526)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000014"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(329),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7532),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000005"),
                             Name = "Basic",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(329)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7532)
                         },
                         new
                         {
                             Id = new Guid("20000000-0000-0000-0000-000000000015"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(336),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7538),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000006"),
                             Name = "Basic",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(336)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7539)
                         });
                 });
 
@@ -462,90 +391,90 @@ namespace Extrudex.Infrastructure.Data.Migrations
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000001"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(482),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7690),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Carbon Fiber",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(482)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7690)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000002"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(805),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7838),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Glass Fiber",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(806)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7838)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000003"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(815),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7846),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Wood Fill",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(815)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7846)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000004"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(821),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7853),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000001"),
                             Name = "Glow-in-the-Dark",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(821)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7853)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000005"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(828),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7859),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000002"),
                             Name = "Carbon Fiber",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(828)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7859)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000006"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(834),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7865),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000002"),
                             Name = "Glass Fiber",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(834)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7866)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000007"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(840),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7872),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000003"),
                             Name = "Carbon Fiber",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(840)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7872)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000008"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(847),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7878),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000003"),
                             Name = "Glass Fiber",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(847)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7879)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000009"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(853),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7885),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000004"),
                             Name = "Carbon Fiber",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(853)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7885)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000010"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(859),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7891),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000006"),
                             Name = "Carbon Fiber",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(860)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7891)
                         },
                         new
                         {
                             Id = new Guid("30000000-0000-0000-0000-000000000011"),
-                            CreatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(866),
+                            CreatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7898),
                             MaterialBaseId = new Guid("10000000-0000-0000-0000-000000000006"),
                             Name = "Glass Fiber",
-                            UpdatedAt = new DateTime(2026, 4, 26, 18, 34, 33, 292, DateTimeKind.Utc).AddTicks(866)
+                            UpdatedAt = new DateTime(2026, 4, 26, 18, 43, 28, 895, DateTimeKind.Utc).AddTicks(7898)
                         });
                 });
 
@@ -877,6 +806,81 @@ namespace Extrudex.Infrastructure.Data.Migrations
                     b.ToTable("spools", (string)null);
                 });
 
+            modelBuilder.Entity("Extrudex.Domain.Entities.UsageLog", b =>
+                {
+                    b.Property<Guid>("Id")
+                        .HasColumnType("uuid")
+                        .HasColumnName("id");
+
+                    b.Property<DateTime>("CreatedAt")
+                        .ValueGeneratedOnAdd()
+                        .HasColumnType("timestamp with time zone")
+                        .HasColumnName("created_at")
+                        .HasDefaultValueSql("now() at time zone 'utc'");
+
+                    b.Property<string>("DataSource")
+                        .IsRequired()
+                        .HasMaxLength(50)
+                        .HasColumnType("character varying(50)")
+                        .HasColumnName("data_source");
+
+                    b.Property<decimal>("GramsUsed")
+                        .HasPrecision(10, 2)
+                        .HasColumnType("numeric(10,2)")
+                        .HasColumnName("grams_used");
+
+                    b.Property<decimal?>("MmExtruded")
+                        .HasPrecision(12, 2)
+                        .HasColumnType("numeric(12,2)")
+                        .HasColumnName("mm_extruded");
+
+                    b.Property<string>("Notes")
+                        .HasMaxLength(2000)
+                        .HasColumnType("character varying(2000)")
+                        .HasColumnName("notes");
+
+                    b.Property<Guid?>("PrintJobId")
+                        .HasColumnType("uuid")
+                        .HasColumnName("print_job_id");
+
+                    b.Property<Guid?>("PrinterId")
+                        .HasColumnType("uuid")
+                        .HasColumnName("printer_id");
+
+                    b.Property<Guid>("SpoolId")
+                        .HasColumnType("uuid")
+                        .HasColumnName("spool_id");
+
+                    b.Property<DateTime>("UpdatedAt")
+                        .ValueGeneratedOnAdd()
+                        .HasColumnType("timestamp with time zone")
+                        .HasColumnName("updated_at")
+                        .HasDefaultValueSql("now() at time zone 'utc'");
+
+                    b.Property<DateTime>("UsageTimestamp")
+                        .HasColumnType("timestamp with time zone")
+                        .HasColumnName("usage_timestamp");
+
+                    b.HasKey("Id");
+
+                    b.HasIndex("DataSource")
+                        .HasDatabaseName("ix_usage_logs_data_source");
+
+                    b.HasIndex("PrintJobId")
+                        .HasDatabaseName("ix_usage_logs_print_job_id");
+
+                    b.HasIndex("PrinterId")
+                        .HasDatabaseName("ix_usage_logs_printer_id");
+
+                    b.HasIndex("SpoolId")
+                        .HasDatabaseName("ix_usage_logs_spool_id");
+
+                    b.HasIndex("UsageTimestamp")
+                        .HasDatabaseName("ix_usage_logs_usage_timestamp");
+
+                    b.ToTable("usage_logs", (string)null);
+                });
+
             modelBuilder.Entity("Extrudex.Domain.Entities.AmsSlot", b =>
                 {
                     b.HasOne("Extrudex.Domain.Entities.AmsUnit", "AmsUnit")
@@ -909,36 +913,6 @@ namespace Extrudex.Infrastructure.Data.Migrations
                     b.Navigation("Printer");
                 });
 
-            modelBuilder.Entity("Extrudex.Domain.Entities.FilamentUsage", b =>
-                {
-                    b.HasOne("Extrudex.Domain.Entities.PrintJob", "PrintJob")
-                        .WithMany("FilamentUsages")
-                        .HasForeignKey("PrintJobId")
-                        .OnDelete(DeleteBehavior.Cascade)
-                        .IsRequired()
-                        .HasConstraintName("fk_filament_usages_print_job");
-
-                    b.HasOne("Extrudex.Domain.Entities.Printer", "Printer")
-                        .WithMany("FilamentUsages")
-                        .HasForeignKey("PrinterId")
-                        .OnDelete(DeleteBehavior.Restrict)
-                        .IsRequired()
-                        .HasConstraintName("fk_filament_usages_printer");
-
-                    b.HasOne("Extrudex.Domain.Entities.Spool", "Spool")
-                        .WithMany("FilamentUsages")
-                        .HasForeignKey("SpoolId")
-                        .OnDelete(DeleteBehavior.Restrict)
-                        .IsRequired()
-                        .HasConstraintName("fk_filament_usages_spool");
-
-                    b.Navigation("PrintJob");
-
-                    b.Navigation("Printer");
-
-                    b.Navigation("Spool");
-                });
-
             modelBuilder.Entity("Extrudex.Domain.Entities.MaterialFinish", b =>
                 {
                     b.HasOne("Extrudex.Domain.Entities.MaterialBase", "MaterialBase")
@@ -1013,6 +987,34 @@ namespace Extrudex.Infrastructure.Data.Migrations
                     b.Navigation("MaterialModifier");
                 });
 
+            modelBuilder.Entity("Extrudex.Domain.Entities.UsageLog", b =>
+                {
+                    b.HasOne("Extrudex.Domain.Entities.PrintJob", "PrintJob")
+                        .WithMany()
+                        .HasForeignKey("PrintJobId")
+                        .OnDelete(DeleteBehavior.SetNull)
+                        .HasConstraintName("fk_usage_logs_print_job");
+
+                    b.HasOne("Extrudex.Domain.Entities.Printer", "Printer")
+                        .WithMany()
+                        .HasForeignKey("PrinterId")
+                        .OnDelete(DeleteBehavior.SetNull)
+                        .HasConstraintName("fk_usage_logs_printer");
+
+                    b.HasOne("Extrudex.Domain.Entities.Spool", "Spool")
+                        .WithMany()
+                        .HasForeignKey("SpoolId")
+                        .OnDelete(DeleteBehavior.Restrict)
+                        .IsRequired()
+                        .HasConstraintName("fk_usage_logs_spool");
+
+                    b.Navigation("PrintJob");
+
+                    b.Navigation("Printer");
+
+                    b.Navigation("Spool");
+                });
+
             modelBuilder.Entity("Extrudex.Domain.Entities.AmsUnit", b =>
                 {
                     b.Navigation("Slots");
@@ -1037,17 +1039,10 @@ namespace Extrudex.Infrastructure.Data.Migrations
                     b.Navigation("Spools");
                 });
 
-            modelBuilder.Entity("Extrudex.Domain.Entities.PrintJob", b =>
-                {
-                    b.Navigation("FilamentUsages");
-                });
-
             modelBuilder.Entity("Extrudex.Domain.Entities.Printer", b =>
                 {
                     b.Navigation("AmsUnits");
 
-                    b.Navigation("FilamentUsages");
-
                     b.Navigation("PrintJobs");
                 });
 
@@ -1055,8 +1050,6 @@ namespace Extrudex.Infrastructure.Data.Migrations
                 {
                     b.Navigation("AmsSlots");
 
-                    b.Navigation("FilamentUsages");
-
                     b.Navigation("PrintJobs");
                 });
 #pragma warning restore 612, 618

backend/Infrastructure/Services/FilamentUsageService.cs

@@ -0,0 +1,79 @@
+using Extrudex.Domain.Entities;
+using Extrudex.Domain.Interfaces;
+using Extrudex.Infrastructure.Data;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.Extensions.Logging;
+
+namespace Extrudex.Infrastructure.Services;
+
+/// <summary>
+/// EF Core–backed implementation of the filament usage service.
+/// Persists usage records to the database and provides query methods
+/// for retrieving usage by print job or spool.
+/// </summary>
+public class FilamentUsageService : IFilamentUsageService
+{
+    private readonly ExtrudexDbContext _dbContext;
+    private readonly ILogger<FilamentUsageService> _logger;
+
+    public FilamentUsageService(
+        ExtrudexDbContext dbContext,
+        ILogger<FilamentUsageService> logger)
+    {
+        _dbContext = dbContext;
+        _logger = logger;
+    }
+
+    /// <inheritdoc />
+    public async Task<FilamentUsage> RecordUsageAsync(
+        Guid printJobId,
+        Guid spoolId,
+        Guid printerId,
+        decimal gramsUsed,
+        decimal mmExtruded,
+        string? notes = null,
+        CancellationToken cancellationToken = default)
+    {
+        var usage = new FilamentUsage
+        {
+            PrintJobId = printJobId,
+            SpoolId = spoolId,
+            PrinterId = printerId,
+            GramsUsed = gramsUsed,
+            MmExtruded = mmExtruded,
+            RecordedAt = DateTime.UtcNow,
+            Notes = notes
+        };
+
+        _dbContext.FilamentUsages.Add(usage);
+        await _dbContext.SaveChangesAsync(cancellationToken);
+
+        _logger.LogInformation(
+            "Recorded filament usage: {Grams}g / {Mm}mm for print job {JobId} on spool {SpoolId}",
+            gramsUsed, mmExtruded, printJobId, spoolId);
+
+        return usage;
+    }
+
+    /// <inheritdoc />
+    public async Task<IReadOnlyList<FilamentUsage>> GetByPrintJobAsync(
+        Guid printJobId,
+        CancellationToken cancellationToken = default)
+    {
+        return await _dbContext.FilamentUsages
+            .Where(u => u.PrintJobId == printJobId)
+            .OrderByDescending(u => u.RecordedAt)
+            .ToListAsync(cancellationToken);
+    }
+
+    /// <inheritdoc />
+    public async Task<IReadOnlyList<FilamentUsage>> GetBySpoolAsync(
+        Guid spoolId,
+        CancellationToken cancellationToken = default)
+    {
+        return await _dbContext.FilamentUsages
+            .Where(u => u.SpoolId == spoolId)
+            .OrderByDescending(u => u.RecordedAt)
+            .ToListAsync(cancellationToken);
+    }
+}

backend/Infrastructure/Services/LowStockDetector.cs

@@ -0,0 +1,95 @@
+using Extrudex.Domain.Interfaces;
+using Microsoft.Extensions.Configuration;
+using Microsoft.Extensions.Logging;
+
+namespace Extrudex.Infrastructure.Services;
+
+/// <summary>
+/// Detects low-stock filament spools by comparing the remaining weight percentage
+/// against a configurable threshold. The threshold can be set via:
+///   1. EXTRUDEX_LOW_STOCK_THRESHOLD env var (highest priority, e.g. "25")
+///   2. FilamentAlerts:LowStockThresholdPercent in appsettings.json
+///   3. Default: 20% (a standard spool is "low" when ≤20% remains)
+/// </summary>
+public class LowStockDetector : ILowStockDetector
+{
+    private readonly ILogger<LowStockDetector> _logger;
+
+    /// <summary>
+    /// The percentage threshold below which a spool is considered low stock.
+    /// For example, 20 means a spool is "low" when ≤20% of its filament remains.
+    /// </summary>
+    public decimal LowStockThresholdPercent { get; }
+
+    /// <summary>
+    /// Initializes a new instance of the <see cref="LowStockDetector"/> class.
+    /// Reads the low-stock threshold from configuration with env var override support.
+    /// </summary>
+    /// <param name="configuration">Application configuration for threshold settings.</param>
+    /// <param name="logger">Logger for diagnostic output.</param>
+    public LowStockDetector(IConfiguration configuration, ILogger<LowStockDetector> logger)
+    {
+        _logger = logger;
+
+        // Priority: env var > appsettings > default (20%)
+        var envThreshold = Environment.GetEnvironmentVariable("EXTRUDEX_LOW_STOCK_THRESHOLD");
+        var configThreshold = configuration.GetValue<decimal?>("FilamentAlerts:LowStockThresholdPercent");
+
+        if (!string.IsNullOrEmpty(envThreshold) && decimal.TryParse(envThreshold, out var parsedEnv))
+        {
+            LowStockThresholdPercent = Math.Clamp(parsedEnv, 0m, 100m);
+            _logger.LogInformation(
+                "Low-stock threshold set from env var EXTRUDEX_LOW_STOCK_THRESHOLD: {Threshold}%",
+                LowStockThresholdPercent);
+        }
+        else if (configThreshold.HasValue)
+        {
+            LowStockThresholdPercent = Math.Clamp(configThreshold.Value, 0m, 100m);
+            _logger.LogInformation(
+                "Low-stock threshold set from config FilamentAlerts:LowStockThresholdPercent: {Threshold}%",
+                LowStockThresholdPercent);
+        }
+        else
+        {
+            LowStockThresholdPercent = 20m;
+            _logger.LogInformation(
+                "Low-stock threshold using default: {Threshold}%", LowStockThresholdPercent);
+        }
+    }
+
+    /// <inheritdoc />
+    public bool IsLowStock(decimal weightRemainingGrams, decimal weightTotalGrams)
+    {
+        if (weightTotalGrams <= 0m)
+        {
+            _logger.LogDebug(
+                "Spool with total weight {Total}g cannot be evaluated for low stock — treating as not low",
+                weightTotalGrams);
+            return false;
+        }
+
+        var remainingPercent = GetRemainingWeightPercent(weightRemainingGrams, weightTotalGrams);
+        var isLow = remainingPercent <= LowStockThresholdPercent;
+
+        if (isLow)
+        {
+            _logger.LogDebug(
+                "Spool is LOW STOCK: {Remaining}g / {Total}g = {Percent:F1}% (threshold: {Threshold}%)",
+                weightRemainingGrams, weightTotalGrams, remainingPercent, LowStockThresholdPercent);
+        }
+
+        return isLow;
+    }
+
+    /// <inheritdoc />
+    public decimal GetRemainingWeightPercent(decimal weightRemainingGrams, decimal weightTotalGrams)
+    {
+        if (weightTotalGrams <= 0m)
+            return 0m;
+
+        return Math.Round(
+            (weightRemainingGrams / weightTotalGrams) * 100m,
+            1,
+            MidpointRounding.AwayFromZero);
+    }
+}

backend/Infrastructure/Services/MoonrakerUsagePoller.cs

@@ -0,0 +1,390 @@
+using Extrudex.Domain.DTOs.Moonraker;
+using Extrudex.Domain.Entities;
+using Extrudex.Domain.Enums;
+using Extrudex.Domain.Interfaces;
+using Extrudex.Infrastructure.Data;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.Extensions.Logging;
+using Microsoft.Extensions.Options;
+
+namespace Extrudex.Infrastructure.Services;
+
+/// <summary>
+/// Configuration options for the Moonraker usage polling service.
+/// </summary>
+public class MoonrakerPollerOptions
+{
+    /// <summary>
+    /// How often to poll each Moonraker printer for filament usage data.
+    /// Default: 30 seconds.
+    /// </summary>
+    public TimeSpan PollInterval { get; set; } = TimeSpan.FromSeconds(30);
+
+    /// <summary>
+    /// Timeout for individual Moonraker HTTP requests.
+    /// Default: 10 seconds.
+    /// </summary>
+    public TimeSpan RequestTimeout { get; set; } = TimeSpan.FromSeconds(10);
+
+    /// <summary>
+    /// Whether the polling service is enabled. Default: true.
+    /// Set to false to disable polling (e.g., in development or testing).
+    /// </summary>
+    public bool Enabled { get; set; } = true;
+}
+
+/// <summary>
+/// Background service that periodically polls Moonraker-connected printers
+/// for filament usage data. When a print job is detected as complete,
+/// the usage data is persisted to the FilamentUsage table via
+/// <see cref="IFilamentUsageService"/>.
+///
+/// <para>Polling logic:</para>
+/// <list type="number">
+///   <item>Query the database for all active printers with ConnectionType == Moonraker.</item>
+///   <item>For each printer, call <see cref="IMoonrakerClient.GetPrintStatsAsync"/> for live data
+///         and <see cref="IMoonrakerClient.GetPrintHistoryAsync"/> for completed job history.</item>
+///   <item>If usage data is available and the print state is "complete",
+///         create or update a FilamentUsage record.</item>
+///   <item>If the printer is unreachable or returns malformed data, log a warning
+///         and continue to the next printer (no crash).</item>
+/// </list>
+///
+/// <para>Error handling:</para>
+/// <list type="bullet">
+///   <item>API unreachable: logged as warning, poller continues for other printers.</item>
+///   <item>Malformed response: logged as warning, poller continues.</item>
+///   <item>Database errors: logged as error, poller continues.</item>
+/// </list>
+/// </summary>
+public class MoonrakerUsagePoller : BackgroundService
+{
+    private readonly IServiceScopeFactory _scopeFactory;
+    private readonly ILogger<MoonrakerUsagePoller> _logger;
+    private readonly MoonrakerPollerOptions _options;
+
+    /// <summary>
+    /// Tracks which Moonraker print jobs have already been recorded,
+    /// keyed by "printerId:gcodeFileName" to avoid duplicate recording.
+    /// </summary>
+    private readonly HashSet<string> _recordedJobs = new();
+
+    public MoonrakerUsagePoller(
+        IServiceScopeFactory scopeFactory,
+        ILogger<MoonrakerUsagePoller> logger,
+        IOptions<MoonrakerPollerOptions> options)
+    {
+        _scopeFactory = scopeFactory;
+        _logger = logger;
+        _options = options.Value;
+    }
+
+    protected override async Task ExecuteAsync(CancellationToken stoppingToken)
+    {
+        if (!_options.Enabled)
+        {
+            _logger.LogInformation("Moonraker usage poller is disabled via configuration.");
+            return;
+        }
+
+        _logger.LogInformation(
+            "Moonraker usage poller starting. Poll interval: {Interval}",
+            _options.PollInterval);
+
+        while (!stoppingToken.IsCancellationRequested)
+        {
+            try
+            {
+                await PollAllPrintersAsync(stoppingToken);
+            }
+            catch (Exception ex)
+            {
+                _logger.LogError(ex,
+                    "Unexpected error in Moonraker usage poller cycle. Continuing.");
+            }
+
+            await Task.Delay(_options.PollInterval, stoppingToken);
+        }
+
+        _logger.LogInformation("Moonraker usage poller stopping.");
+    }
+
+    private async Task PollAllPrintersAsync(CancellationToken cancellationToken)
+    {
+        using var scope = _scopeFactory.CreateScope();
+        var dbContext = scope.ServiceProvider.GetRequiredService<ExtrudexDbContext>();
+        var moonrakerClient = scope.ServiceProvider.GetRequiredService<IMoonrakerClient>();
+        var usageService = scope.ServiceProvider.GetRequiredService<IFilamentUsageService>();
+
+        var printers = await dbContext.Printers
+            .Where(p => p.IsActive && p.ConnectionType == ConnectionType.Moonraker)
+            .ToListAsync(cancellationToken);
+
+        if (printers.Count == 0)
+        {
+            _logger.LogDebug("No active Moonraker printers found.");
+            return;
+        }
+
+        _logger.LogDebug("Polling {Count} Moonraker printer(s).", printers.Count);
+
+        foreach (var printer in printers)
+        {
+            await PollPrinterAsync(
+                printer, moonrakerClient, usageService, dbContext, cancellationToken);
+        }
+    }
+
+    private async Task PollPrinterAsync(
+        Printer printer,
+        IMoonrakerClient moonrakerClient,
+        IFilamentUsageService usageService,
+        ExtrudexDbContext dbContext,
+        CancellationToken cancellationToken)
+    {
+        _logger.LogDebug(
+            "Polling Moonraker printer {PrinterName} ({Host}:{Port})",
+            printer.Name, printer.HostnameOrIp, printer.Port);
+
+        try
+        {
+            var printStats = await moonrakerClient.GetPrintStatsAsync(
+                printer.HostnameOrIp,
+                printer.Port,
+                printer.ApiKey,
+                cancellationToken);
+
+            if (printStats is null)
+            {
+                _logger.LogDebug(
+                    "No print stats available from printer {PrinterName}.", printer.Name);
+                return;
+            }
+
+            printer.LastSeenAt = DateTime.UtcNow;
+            await dbContext.SaveChangesAsync(cancellationToken);
+
+            _logger.LogDebug(
+                "Printer {PrinterName}: state={State}, filament={Mm}mm, file={File}",
+                printer.Name, printStats.State, printStats.FilamentUsedMm, printStats.Filename);
+
+            decimal mmExtruded = printStats.FilamentUsedMm;
+            if (mmExtruded <= 0)
+            {
+                _logger.LogDebug(
+                    "Printer {PrinterName} has no filament usage to record.", printer.Name);
+                return;
+            }
+
+            if (!IsCompleteState(printStats.State))
+            {
+                _logger.LogDebug(
+                    "Printer {PrinterName} print state '{State}' is not complete; skipping.",
+                    printer.Name, printStats.State);
+                return;
+            }
+
+            string gcodeFileName = printStats.Filename ?? $"unknown-{Guid.NewGuid():N}";
+            var deduplicationKey = $"{printer.Id}:{gcodeFileName}";
+            if (_recordedJobs.Contains(deduplicationKey))
+            {
+                _logger.LogDebug(
+                    "Printer {PrinterName} job '{File}' already recorded; skipping.",
+                    printer.Name, gcodeFileName);
+                return;
+            }
+
+            DateTime? startedAt = null;
+            DateTime? completedAt = null;
+            try
+            {
+                var history = await moonrakerClient.GetPrintHistoryAsync(
+                    printer.HostnameOrIp, printer.Port, printer.ApiKey,
+                    limit: 1, cancellationToken);
+
+                if (history.Items.Count > 0)
+                {
+                    var latestJob = history.Items[0];
+                    startedAt = latestJob.StartTime;
+                    completedAt = latestJob.EndTime;
+                }
+            }
+            catch (Exception ex)
+            {
+                _logger.LogDebug(ex,
+                    "Could not fetch history for printer {PrinterName}; proceeding with stats only.",
+                    printer.Name);
+            }
+
+            var printJob = await FindOrCreatePrintJobAsync(
+                dbContext, printer, mmExtruded, gcodeFileName,
+                startedAt, completedAt, cancellationToken);
+
+            if (printJob is null)
+            {
+                _logger.LogWarning(
+                    "Could not find or create print job for printer {PrinterName}. No active spool found.",
+                    printer.Name);
+                return;
+            }
+
+            var spool = await dbContext.Spools.FindAsync(
+                new object[] { printJob.SpoolId }, cancellationToken);
+
+            var gramsUsed = CalculateGramsUsed(mmExtruded, spool);
+
+            await usageService.RecordUsageAsync(
+                printJobId: printJob.Id,
+                spoolId: printJob.SpoolId,
+                printerId: printer.Id,
+                gramsUsed: gramsUsed,
+                mmExtruded: mmExtruded,
+                notes: $"Moonraker auto-recorded: {gcodeFileName}",
+                cancellationToken: cancellationToken);
+
+            _recordedJobs.Add(deduplicationKey);
+
+            _logger.LogInformation(
+                "Recorded Moonraker usage for printer {PrinterName}: {Mm}mm / {Grams}g, job '{File}'",
+                printer.Name, mmExtruded, gramsUsed, gcodeFileName);
+        }
+        catch (HttpRequestException ex)
+        {
+            _logger.LogWarning(ex,
+                "Moonraker API unreachable for printer {PrinterName} ({Host}:{Port}). Will retry next cycle.",
+                printer.Name, printer.HostnameOrIp, printer.Port);
+        }
+        catch (TaskCanceledException) when (cancellationToken.IsCancellationRequested)
+        {
+            throw;
+        }
+        catch (TaskCanceledException ex)
+        {
+            _logger.LogWarning(ex,
+                "Moonraker request timed out for printer {PrinterName} ({Host}:{Port}).",
+                printer.Name, printer.HostnameOrIp, printer.Port);
+        }
+        catch (Exception ex)
+        {
+            _logger.LogError(ex,
+                "Unexpected error polling Moonraker printer {PrinterName}. Continuing to next printer.",
+                printer.Name);
+        }
+    }
+
+    private static bool IsCompleteState(string state) =>
+        state.Equals("complete", StringComparison.OrdinalIgnoreCase) ||
+        state.Equals("completed", StringComparison.OrdinalIgnoreCase);
+
+    private async Task<PrintJob?> FindOrCreatePrintJobAsync(
+        ExtrudexDbContext dbContext,
+        Printer printer,
+        decimal mmExtruded,
+        string gcodeFileName,
+        DateTime? startedAt,
+        DateTime? completedAt,
+        CancellationToken cancellationToken)
+    {
+        if (!string.IsNullOrEmpty(gcodeFileName))
+        {
+            var existingJob = await dbContext.PrintJobs
+                .Where(j => j.PrinterId == printer.Id &&
+                            j.GcodeFilePath == gcodeFileName &&
+                            j.DataSource == DataSource.Moonraker &&
+                            j.Status != JobStatus.Cancelled)
+                .OrderByDescending(j => j.CreatedAt)
+                .FirstOrDefaultAsync(cancellationToken);
+
+            if (existingJob is not null)
+            {
+                existingJob.MmExtruded = mmExtruded;
+                existingJob.GramsDerived = CalculateGramsUsed(
+                    mmExtruded,
+                    await dbContext.Spools.FindAsync(
+                        new object[] { existingJob.SpoolId }, cancellationToken));
+                existingJob.Status = JobStatus.Completed;
+                existingJob.CompletedAt = completedAt ?? DateTime.UtcNow;
+                existingJob.StartedAt ??= startedAt;
+                await dbContext.SaveChangesAsync(cancellationToken);
+                return existingJob;
+            }
+        }
+
+        var spool = await FindActiveSpoolForPrinterAsync(dbContext, printer, cancellationToken);
+        if (spool is null) return null;
+
+        var gramsDerived = CalculateGramsUsed(mmExtruded, spool);
+
+        var newJob = new PrintJob
+        {
+            PrinterId = printer.Id,
+            SpoolId = spool.Id,
+            PrintName = gcodeFileName ?? "Moonraker Print",
+            GcodeFilePath = gcodeFileName,
+            MmExtruded = mmExtruded,
+            GramsDerived = gramsDerived,
+            FilamentDiameterAtPrintMm = spool.FilamentDiameterMm,
+            MaterialDensityAtPrint = GetMaterialDensity(spool),
+            DataSource = DataSource.Moonraker,
+            Status = JobStatus.Completed,
+            StartedAt = startedAt ?? DateTime.UtcNow,
+            CompletedAt = completedAt ?? DateTime.UtcNow,
+            Notes = "Auto-created by Moonraker usage poller"
+        };
+
+        dbContext.PrintJobs.Add(newJob);
+        await dbContext.SaveChangesAsync(cancellationToken);
+
+        return newJob;
+    }
+
+    private static async Task<Spool?> FindActiveSpoolForPrinterAsync(
+        ExtrudexDbContext dbContext,
+        Printer printer,
+        CancellationToken cancellationToken)
+    {
+        var amsSpool = await dbContext.AmsSlots
+            .Include(s => s.Spool)
+            .ThenInclude(s => s!.MaterialBase)
+            .Include(s => s.AmsUnit)
+            .Where(s => s.AmsUnit.PrinterId == printer.Id && s.Spool != null && s.Spool.IsActive)
+            .Select(s => s.Spool)
+            .FirstOrDefaultAsync(cancellationToken);
+
+        if (amsSpool is not null) return amsSpool;
+
+        return await dbContext.Spools
+            .Include(s => s.MaterialBase)
+            .Where(s => s.IsActive)
+            .OrderByDescending(s => s.WeightRemainingGrams)
+            .FirstOrDefaultAsync(cancellationToken);
+    }
+
+    private static decimal CalculateGramsUsed(decimal mmExtruded, Spool? spool)
+    {
+        if (spool is null) return 0m;
+        var diameterMm = spool.FilamentDiameterMm;
+        var densityGcm3 = GetMaterialDensity(spool);
+        var radiusMm = diameterMm / 2m;
+        var crossSectionArea = Math.PI * (double)radiusMm * (double)radiusMm;
+        var volumeMm3 = (double)mmExtruded * crossSectionArea;
+        var volumeCm3 = volumeMm3 / 1000.0;
+        var grams = volumeCm3 * (double)densityGcm3;
+        return Math.Round((decimal)grams, 2);
+    }
+
+    private static decimal GetMaterialDensity(Spool? spool)
+    {
+        return spool?.MaterialBase?.Name?.ToUpperInvariant() switch
+        {
+            "PLA" => 1.24m,
+            "PETG" => 1.27m,
+            "ABS" => 1.04m,
+            "ASA" => 1.07m,
+            "TPU" => 1.21m,
+            "NYLON" or "PA" => 1.13m,
+            "PC" => 1.20m,
+            _ => 1.24m
+        };
+    }
+}

backend/Infrastructure/Services/UsageLogService.cs

@@ -0,0 +1,81 @@
+using Extrudex.Domain.Entities;
+using Extrudex.Domain.Enums;
+using Extrudex.Domain.Interfaces;
+using Extrudex.Infrastructure.Data;
+using Microsoft.EntityFrameworkCore;
+
+namespace Extrudex.Infrastructure.Services;
+
+/// <summary>
+/// Implementation of <see cref="IUsageLogService"/> that persists usage entries
+/// to the usage_logs table via EF Core.
+/// </summary>
+public class UsageLogService : IUsageLogService
+{
+    private readonly ExtrudexDbContext _dbContext;
+
+    /// <summary>
+    /// Initializes a new instance of the <see cref="UsageLogService"/> class.
+    /// </summary>
+    /// <param name="dbContext">The EF Core database context for data persistence.</param>
+    public UsageLogService(ExtrudexDbContext dbContext)
+    {
+        _dbContext = dbContext;
+    }
+
+    /// <inheritdoc/>
+    public async Task<UsageLog> RecordUsageAsync(
+        Guid spoolId,
+        decimal gramsUsed,
+        DataSource dataSource,
+        Guid? printerId = null,
+        Guid? printJobId = null,
+        decimal? mmExtruded = null,
+        DateTime? usageTimestamp = null,
+        string? notes = null)
+    {
+        var entry = new UsageLog
+        {
+            SpoolId = spoolId,
+            GramsUsed = gramsUsed,
+            DataSource = dataSource,
+            PrinterId = printerId,
+            PrintJobId = printJobId,
+            MmExtruded = mmExtruded,
+            UsageTimestamp = usageTimestamp ?? DateTime.UtcNow,
+            Notes = notes
+        };
+
+        _dbContext.UsageLogs.Add(entry);
+        await _dbContext.SaveChangesAsync();
+
+        return entry;
+    }
+
+    /// <inheritdoc/>
+    public async Task<IEnumerable<UsageLog>> GetBySpoolAsync(Guid spoolId, CancellationToken cancellationToken = default)
+    {
+        return await _dbContext.UsageLogs
+            .Where(u => u.SpoolId == spoolId)
+            .OrderByDescending(u => u.UsageTimestamp)
+            .ToListAsync(cancellationToken);
+    }
+
+    /// <inheritdoc/>
+    public async Task<IEnumerable<UsageLog>> GetByPrinterAsync(Guid printerId, CancellationToken cancellationToken = default)
+    {
+        return await _dbContext.UsageLogs
+            .Where(u => u.PrinterId == printerId)
+            .OrderByDescending(u => u.UsageTimestamp)
+            .ToListAsync(cancellationToken);
+    }
+
+    /// <inheritdoc/>
+    public async Task<IEnumerable<UsageLog>> GetByPrintJobAsync(Guid printJobId, CancellationToken cancellationToken = default)
+    {
+        return await _dbContext.UsageLogs
+            .Where(u => u.PrintJobId == printJobId)
+            .OrderByDescending(u => u.UsageTimestamp)
+            .ToListAsync(cancellationToken);
+    }
+}

backend/Program.cs

@@ -55,6 +55,20 @@ builder.Services.AddSingleton<IQrCodeService, QrCodeService>();
 // ── Cost Per Print Calculation ─────────────────────────────
 builder.Services.AddScoped<ICostPerPrintService, CostPerPrintService>();
 
+// ── Low Stock Detection ────────────────────────────────────
+builder.Services.AddSingleton<ILowStockDetector, LowStockDetector>();
+
+// ── Usage Logging ───────────────────────────────────────────
+builder.Services.AddScoped<IUsageLogService, UsageLogService>();
+
+// ── Filament Usage Service ──────────────────────────────────
+builder.Services.AddScoped<IFilamentUsageService, FilamentUsageService>();
+
+// ── Moonraker Usage Poller (Background Service) ─────────────
+builder.Services.Configure<MoonrakerPollerOptions>(
+    builder.Configuration.GetSection("MoonrakerPoller"));
+builder.Services.AddHostedService<MoonrakerUsagePoller>();
+
 // ── FluentValidation ──────────────────────────────────────
 // Registers all validators from the API assembly into DI.
 builder.Services.AddValidatorsFromAssembly(Assembly.GetExecutingAssembly());

backend/appsettings.json

@@ -20,5 +20,14 @@
     "RequestTimeout": "00:00:15",
     "Enabled": true,
     "HistoryBatchSize": 25
+  },
+  "FilamentAlerts": {
+    "LowStockThresholdPercent": 20
+  },
+  "MoonrakerPoller": {
+    "Enabled": true,
+    "PollInterval": "00:00:30",
+    "RequestTimeout": "00:00:10"
   }
 }
+}

design/mobile-design-system.md

@@ -0,0 +1,517 @@
+# Extrudex Mobile-First Design System
+
+> **Project:** CUB-71 — Mobile-First Touch-Optimized UI Design  
+> **Parent:** CUB-67 — Extrudex Mobile-First PWA Implementation  
+> **Date:** 2026-05-01  
+> **Author:** Sketch  
+> **Status:** In Progress
+
+---
+
+## 1. Design Philosophy
+
+### Mobile-First, Touch-Always
+- **Minimum touch target:** 44×44px (Apple HIG) / 48×48dp (Material Design)
+- **Thumb-friendly zones:** Primary actions in bottom 25% of screen
+- **Gesture support:** Swipe, pull-to-refresh, pinch-to-zoom on relevant screens
+- **One-handed use:** All critical actions reachable within thumb zone
+
+### Workshop-Ready
+- **High contrast:** WCAG AA minimum (4.5:1) — workshop lighting varies
+- **Large text:** 16sp minimum body, 20sp+ for primary info
+- **Glanceable:** Key info visible at arm's length (3ft)
+- **Glove-compatible:** Larger tap targets for operators wearing work gloves
+
+### Speed Over Complexity
+- **Sub-second load:** Cached assets, skeleton screens
+- **Minimal taps:** Every flow optimized for fewest interactions
+- **Smart defaults:** Pre-filled forms based on context
+
+---
+
+## 2. Color System
+
+### Primary Palette (Dark Theme — Default)
+
+| Token | Hex | Usage |
+|-------|-----|-------|
+| `surface` | `#1C1B1F` | Screen background |
+| `onSurface` | `#E6E1E5` | Primary text |
+| `surfaceContainer` | `#211F26` | Cards, app bar |
+| `surfaceContainerHigh` | `#2B2930` | Elevated cards |
+| `primary` | `#A8CEDA` | FAB, active states, links |
+| `onPrimary` | `#00303E` | Text on primary |
+| `primaryContainer` | `#004D63` | Chip fills, tonal buttons |
+| `onPrimaryContainer` | `#A8CEDA` | Text on primary container |
+| `secondary` | `#B1CCC7` | Secondary actions |
+| `error` | `#F2B8B5` | Critical stock, errors |
+| `errorContainer` | `#8C1D18` | Error backgrounds |
+| `warning` | `#FFD580` | Low stock warning |
+| `warningContainer` | `#5D4200` | Warning backgrounds |
+| `success` | `#8BD0A0` | Available, success states |
+| `successContainer` | `#00522E` | Success backgrounds |
+| `outline` | `#938F99` | Borders, dividers |
+| `outlineVariant` | `#49454F` | Subtle borders |
+
+### Light Theme (Optional)
+
+| Token | Hex | Usage |
+|-------|-----|-------|
+| `surface` | `#F8FAFC` | Screen background |
+| `surfaceContainer` | `#FFFFFF` | Cards |
+| `primary` | `#2563EB` | Primary actions |
+| `onSurface` | `#0F172A` | Primary text |
+
+---
+
+## 3. Typography Scale
+
+### Mobile Type Scale
+
+| Role | Token | Size | Weight | Line Height | Letter Spacing |
+|------|-------|------|--------|-------------|----------------|
+| Display Large | `displayLarge` | 57sp | 400 | 64sp | -0.25px |
+| Display Medium | `displayMedium` | 45sp | 400 | 52sp | 0 |
+| Headline Large | `headlineLarge` | 32sp | 400 | 40sp | 0 |
+| Headline Medium | `headlineMedium` | 28sp | 400 | 36sp | 0 |
+| Headline Small | `headlineSmall` | 24sp | 400 | 32sp | 0 |
+| Title Large | `titleLarge` | 22sp | 400 | 28sp | 0 |
+| Title Medium | `titleMedium` | 16sp | 500 | 24sp | 0.15px |
+| Title Small | `titleSmall` | 14sp | 500 | 20sp | 0.1px |
+| Body Large | `bodyLarge` | 16sp | 400 | 24sp | 0.5px |
+| Body Medium | `bodyMedium` | 14sp | 400 | 20sp | 0.25px |
+| Label Large | `labelLarge` | 14sp | 500 | 20sp | 0.1px |
+| Label Medium | `labelMedium` | 12sp | 500 | 16sp | 0.5px |
+| Label Small | `labelSmall` | 11sp | 500 | 16sp | 0.5px |
+
+### Font Stack
+```css
+--font-sans: 'Inter', 'Roboto', system-ui, -apple-system, sans-serif;
+--font-mono: 'JetBrains Mono', 'Roboto Mono', monospace;
+```
+
+---
+
+## 4. Spacing System
+
+### 8dp Grid Base
+
+| Token | Value | Usage |
+|-------|-------|-------|
+| `space-1` | 4dp | Tight padding, icon gaps |
+| `space-2` | 8dp | Default gap, small padding |
+| `space-3` | 12dp | Card padding (compact) |
+| `space-4` | 16dp | Standard padding, section gaps |
+| `space-5` | 20dp | Large padding |
+| `space-6` | 24dp | Section margins, hero padding |
+| `space-8` | 32dp | Large section gaps |
+| `space-10` | 40dp | Major section spacing |
+| `space-12` | 48dp | Touch target minimum |
+| `space-16` | 64dp | App bar height |
+
+### Border Radius
+
+| Token | Value | Usage |
+|-------|-------|-------|
+| `radius-sm` | 4dp | Small buttons, chips |
+| `radius-md` | 8dp | Cards, inputs |
+| `radius-lg` | 12dp | Modals, bottom sheets |
+| `radius-xl` | 16dp | Large cards, dialogs |
+| `radius-full` | 9999px | Pills, circular elements |
+
+---
+
+## 5. Component Specifications
+
+### 5.1 Bottom Navigation Bar
+
+**Height:** 80dp  
+**Background:** `surfaceContainer` with 1dp top outline  
+**Layout:** 4-5 icon+label items, evenly distributed  
+**Active state:** Icon filled + `primary` color, label `primary`  
+**Inactive state:** Icon outlined + `onSurfaceVariant` color  
+**Touch target:** Full 80dp height, icon+label centered  
+
+```
+┌─────────────────────────────────────┐
+│  📦      🖨️       📋       ⚙️      │
+│Inventory Printers   Jobs   Settings  │
+└─────────────────────────────────────┘
+```
+
+**Destinations:**
+- Inventory (spools list) — default active
+- Printers (printer fleet status)
+- Jobs (print job history)
+- Settings (app configuration)
+
+---
+
+### 5.2 QR Scanner Interface
+
+**Layout:** Full-bleed camera viewport with overlay
+
+```
+┌─────────────────────────────────────┐
+│  ✕   Scan Spool              [⚡]   │  ← App Bar (56dp)
+├─────────────────────────────────────┤
+│                                     │
+│  ┌─────────────────────────────┐    │
+│  │                             │    │
+│  │    ┌───────────────────┐    │    │
+│  │    │ ╔═══════════════╗ │    │    │
+│  │    │ ║  ▄▄▄▄▄▄▄▄▄▄▄  ║ │    │    │
+│  │    │ ║  █  VIEWPORT   █  ║ │    │    │
+│  │    │ ║  █   FRAME     █  ║ │    │    │
+│  │    │ ║  ▀▀▀▀▀▀▀▀▀▀▀  ║ │    │    │
+│  │    │ ║  (scan line)   ║ │    │    │
+│  │    └───────────────────┘    │    │
+│  │                             │    │
+│  │      LIVE CAMERA FEED       │    │
+│  │                             │    │
+│  └─────────────────────────────┘    │
+│                                     │
+│  [Last scan: 8901234567890]        │
+│                                     │
+│  Can't scan? Enter manually        │
+│                                     │
+└─────────────────────────────────────┘
+```
+
+**Elements:**
+- **Camera viewport:** Full width, 60% screen height, `surfaceContainerHighest` background before camera starts
+- **Scanning frame:** 200dp × 120dp centered, corner brackets (3dp stroke, `primary`)
+- **Scan line:** Horizontal 2dp line, sweeps top→bottom (2s cycle), `primary` at 40% opacity
+- **Scan result chip:** Appears below viewport, monospace text, auto-advances in 1.5s
+- **Manual entry:** Text button fallback
+
+**States:**
+| State | Visual |
+|-------|--------|
+| Initializing | Shimmer loading + "Starting camera…" |
+| Ready | Live feed + animated scan line |
+| Scanning | Frame flashes `success` green |
+| No match | Frame flashes `warning` yellow |
+| Camera denied | Error card + "Enter manually" button |
+
+---
+
+### 5.3 Spool Detail View (Mobile)
+
+**Layout:** Scrollable vertical stack
+
+```
+┌─────────────────────────────────────┐
+│  ←  PLA Basic — Matte Black   [✏]  │  ← App Bar
+├─────────────────────────────────────┤
+│                                     │
+│  ┌──────┐                           │
+│  │SWATCH│  PLA Basic — Matte       │
+│  │ 80dp │  Black           [Avail] │
+│  └──────┘  Bambu Lab               │
+│                                     │
+│       ◉  842g / 1000g  (67%)      │  ← Circular progress
+│                                     │
+├─────────────────────────────────────┤
+│  Total Weight    │  Remaining       │
+│  1,000g          │  842g (67%)      │
+├─────────────────────────────────────┤
+│  Diameter        │  Density          │
+│  1.75mm          │  1.24 g/cm³      │
+├─────────────────────────────────────┤
+│  Date Added      │  Last Used        │
+│  Mar 12, 2026    │  Apr 18, 2026    │
+├─────────────────────────────────────┤
+│  📍 AMS Unit 2, Slot A3    [Move]  │
+├─────────────────────────────────────┤
+│  ┌──────────┐                      │
+│  │  QR CODE │                      │
+│  │  160dp   │  EXT-2026-PLA-0042  │
+│  └──────────┘         [Reprint]   │
+├─────────────────────────────────────┤
+│  Recent Usage                       │
+│  Print #1847 — Benchy  -32g        │
+│  Print #1842 — Housing  -18g        │
+│  [View Full History →]             │
+├─────────────────────────────────────┤
+│                                     │
+│  [Depleted]  [Move]  [Print]       │  ← Sticky action row
+│                                     │
+├─────────────────────────────────────┤
+│  📦     🖨️     📋     ⚙️            │  ← Bottom nav
+└─────────────────────────────────────┘
+```
+
+**Hero Section:**
+- Color swatch: 80dp circle, `outlineVariant` border
+- Material name: `headlineMedium` (28sp)
+- Brand: `bodyLarge` (16sp), `onSurfaceVariant`
+- Status badge: Tonal chip
+- Circular progress: 96dp diameter, dynamic color based on percentage
+
+**Metrics Grid:**
+- 2-column grid on mobile, 3-column on kiosk
+- Label: `labelMedium` (12sp)
+- Value: `titleMedium` (16sp)
+
+**Action Row (Sticky):**
+- Height: 64dp minimum
+- Buttons: 48dp height minimum
+- Deplete: Outlined, `error` color
+- Move: Tonal, `secondary` color
+- Print: Filled, `primary` color
+
+---
+
+### 5.4 Print-Log Form (Quick Entry)
+
+**Layout:** Bottom sheet or full-screen
+
+```
+┌─────────────────────────────────────┐
+│  ✕   Log Print Usage                 │
+├─────────────────────────────────────┤
+│                                     │
+│  Spool: PLA Basic — Matte Black     │
+│  Remaining: 842g                    │
+│                                     │
+│  Weight Used                        │
+│  ┌─────────────────────────────┐   │
+│  │  [−]    32    [+]  grams    │   │  ← Stepper
+│  └─────────────────────────────┘   │
+│                                     │
+│  Quick: [10] [25] [50] [100]       │
+│                                     │
+│  Print Job (optional)              │
+│  ┌─────────────────────────────┐   │
+│  │ Select or enter job name... │   │
+│  └─────────────────────────────┘   │
+│                                     │
+│  Notes (optional)                  │
+│  ┌─────────────────────────────┐   │
+│  │ ...                         │   │
+│  └─────────────────────────────┘   │
+│                                     │
+│  ┌─────────────────────────────┐   │
+│  │    ✓ Log Print (842→810g)   │   │
+│  └─────────────────────────────┘   │
+│                                     │
+└─────────────────────────────────────┘
+```
+
+**Design Principles:**
+- **Number pad first:** Show numeric keyboard by default
+- **Quick-select chips:** Common values (10g, 25g, 50g, 100g)
+- **Stepper control:** ± buttons flanking input
+- **Live preview:** Show remaining weight after deduction
+- **Single-tap complete:** Primary action always visible
+
+---
+
+### 5.5 Status Badges
+
+| Status | Background | Text | Icon |
+|--------|-----------|------|------|
+| Available | `successContainer` | `success` | check_circle |
+| In Use | `primaryContainer` | `primary` | print |
+| Low Stock | `warningContainer` | `warning` | warning |
+| Critical | `errorContainer` | `error` | error |
+| Depleted | `errorContainer` | `error` | remove_circle |
+
+---
+
+### 5.6 Touch Targets & Accessibility
+
+**Minimum Sizes:**
+- Interactive elements: 48×48dp
+- List items: 56dp height minimum
+- Buttons: 48dp height, 88dp minimum width
+- Chips: 32dp height, 48dp minimum width
+- Input fields: 56dp height
+
+**Focus States:**
+- 2dp outline, `primary` color, 2dp offset
+- Visible on keyboard navigation
+
+**Motion:**
+- Respect `prefers-reduced-motion`
+- Disable animations when set
+- Use opacity fades instead of transforms
+
+---
+
+## 6. Responsive Breakpoints
+
+| Breakpoint | Width | Target |
+|-----------|-------|--------|
+| Compact | 0-599dp | Mobile phones |
+| Medium | 600-839dp | Large phones, small tablets |
+| Expanded | 840-1199dp | Tablets, small desktops |
+| Large | 1200dp+ | Desktops, kiosks |
+
+### Layout Adaptations
+
+| Property | Compact (Mobile) | Large (Kiosk) |
+|----------|-----------------|---------------|
+| Navigation | Bottom bar (80dp) | Rail (80dp, left) |
+| Content padding | 16dp | 24dp |
+| Grid columns | 1-2 | 2-3 |
+| Card padding | 16dp | 20dp |
+| Typography scale | Standard | +10% for distance viewing |
+| Touch targets | 48dp | 56dp (glove-friendly) |
+
+---
+
+## 7. Animation & Motion
+
+### Principles
+- **Purposeful:** Every animation guides attention or provides feedback
+- **Fast:** 200-300ms standard duration
+- **Easing:** `ease-out` for entrances, `ease-in-out` for transitions
+
+### Patterns
+
+| Animation | Duration | Easing | Use Case |
+|-----------|----------|--------|----------|
+| Slide in | 300ms | ease-out | Screen transitions |
+| Fade | 200ms | ease-in-out | Modal/dialog |
+| Scale | 200ms | ease-out | Button presses |
+| Shimmer | 1.5s | linear | Loading skeletons |
+| Pulse | 2s | ease-in-out | Scan line, critical alerts |
+| Progress | 600ms | ease-out | Circular progress fill |
+
+### Interaction Feedback
+- **Button press:** Scale to 0.96, 100ms
+- **Chip select:** Background color transition, 150ms
+- **List item tap:** Ripple effect, `primary` at 12% opacity
+- **Success:** Green flash + haptic (mobile)
+- **Error:** Red flash + shake animation
+
+---
+
+## 8. Assets & Icons
+
+### Icon Set
+- **Library:** Material Symbols (rounded)
+- **Size:** 24dp default, 20dp in dense areas
+- **Weight:** 400 (regular), filled for active states
+
+### Required Icons
+| Icon | Name | Usage |
+|------|------|-------|
+| 📦 | inventory_2 | Inventory nav |
+| 🖨️ | print | Printers nav |
+| 📋 | assignment | Jobs nav |
+| ⚙️ | settings | Settings nav |
+| ✕ | close | Close/dismiss |
+| ← | arrow_back | Navigate back |
+| ✏ | edit | Edit action |
+| 🔍 | search | Search toggle |
+| + | add | Add/create |
+| 🗑 | delete | Delete action |
+| 📷 | photo_camera | Scan action |
+| ⚠ | warning | Warning states |
+| ✓ | check_circle | Success states |
+| 📍 | location_on | Location |
+| 📶 | signal_cellular_alt | SignalR status |
+
+---
+
+## 9. Developer Handoff Checklist
+
+- [x] Color tokens defined (dark theme)
+- [x] Typography scale specified
+- [x] Spacing system documented
+- [x] Component specifications written
+- [x] Touch targets validated (≥48dp)
+- [x] Responsive breakpoints defined
+- [x] Animation patterns documented
+- [x] Icon set specified
+- [ ] Mockup images generated (blocked — image generation unavailable)
+- [ ] Figma/Sketch file created (optional)
+- [ ] Design tokens exported to CSS/SCSS
+
+---
+
+## 10. Implementation Notes for Rex
+
+### Priority Order
+1. Bottom navigation component
+2. QR scanner interface (camera + overlay)
+3. Spool detail view (scrollable)
+4. Print-log form (bottom sheet)
+5. Status badges and indicators
+
+### Angular Material Components Needed
+```typescript
+import { MatBottomSheetModule } from '@angular/material/bottom-sheet';
+import { MatButtonModule } from '@angular/material/button';
+import { MatCardModule } from '@angular/material/card';
+import { MatChipsModule } from '@angular/material/chips';
+import { MatDialogModule } from '@angular/material/dialog';
+import { MatFormFieldModule } from '@angular/material/form-field';
+import { MatIconModule } from '@angular/material/icon';
+import { MatInputModule } from '@angular/material/input';
+import { MatProgressBarModule } from '@angular/material/progress-bar';
+import { MatProgressSpinnerModule } from '@angular/material/progress-spinner';
+import { MatSelectModule } from '@angular/material/select';
+import { MatSnackBarModule } from '@angular/material/snack-bar';
+import { MatToolbarModule } from '@angular/material/toolbar';
+```
+
+### QR Scanning Libraries
+- **Mobile:** `html5-qrcode` or `@zxing/browser`
+- **Camera access:** `navigator.mediaDevices.getUserMedia({ facingMode: 'environment' })`
+
+### Key Files to Create
+```
+frontend/src/app/
+├── components/
+│   ├── bottom-nav/
+│   │   ├── bottom-nav.component.ts
+│   │   ├── bottom-nav.component.html
+│   │   └── bottom-nav.component.scss
+│   ├── qr-scanner/
+│   │   ├── qr-scanner.component.ts
+│   │   ├── qr-scanner.component.html
+│   │   └── qr-scanner.component.scss
+│   ├── spool-detail/
+│   │   ├── spool-detail.component.ts
+│   │   ├── spool-detail.component.html
+│   │   └── spool-detail.component.scss
+│   └── print-log-form/
+│       ├── print-log-form.component.ts
+│       ├── print-log-form.component.html
+│       └── print-log-form.component.scss
+├── design-system/
+│   ├── _colors.scss
+│   ├── _typography.scss
+│   ├── _spacing.scss
+│   └── _mixins.scss
+└── models/
+    └── mobile-ui.model.ts
+```
+
+---
+
+## 11. File Locations
+
+| File | Path | Purpose |
+|------|------|---------|
+| Design System | `design/mobile-design-system.md` | This document |
+| Inventory Spec | `design/01-filament-inventory-list.md` | Existing — inventory screen |
+| Spool Detail Spec | `design/02-spool-detail-view.md` | Existing — detail screen |
+| Smart Intake Spec | `design/03-smart-intake-workflow.md` | Existing — intake flow |
+| Identify Spec | `design/smart-intake-identify-spec.md` | Existing — identify state |
+| Mockup Images | `design/mockup-*.png/jpg` | Visual references |
+
+---
+
+**Next Steps:**
+1. Review design system with stakeholders
+2. Generate mockup images (when image generation is available)
+3. Export design tokens to SCSS
+4. Hand off to Rex for implementation
+5. Create interactive prototype (optional)
+
+**Status:** Design system document complete. Ready for implementation handoff.

frontend/src/app/components/filament-dialog/filament-dialog.component.html

@@ -0,0 +1,225 @@
+<!-- Filament Add/Edit Dialog — Angular Material Dialog -->
+<mat-dialog-content class="filament-dialog-content">
+
+  <!-- Dialog Title -->
+  <h2 mat-dialog-title>{{ dialogTitle() }}</h2>
+
+  <!-- Loading state for lookup data -->
+  @if (lookupsLoading()) {
+    <div class="dialog-loading" role="status" aria-label="Loading material options">
+      <mat-spinner diameter="32"></mat-spinner>
+      <p>Loading material options…</p>
+    </div>
+  }
+
+  <!-- Form -->
+  @if (!lookupsLoading()) {
+    <form [formGroup]="form" class="filament-form" (ngSubmit)="save()">
+
+      <!-- Server Error Banner -->
+      @if (serverError()) {
+        <div class="error-banner" role="alert">
+          <mat-icon aria-hidden="true">error</mat-icon>
+          <span>{{ serverError() }}</span>
+        </div>
+      }
+
+      <!-- ── Material Section ──────────────────────────────── -->
+      <div class="form-section">
+        <h3 class="section-title">Material</h3>
+
+        <!-- Base Material -->
+        <mat-form-field appearance="outline" class="form-field full-width">
+          <mat-label>Base Material</mat-label>
+          <mat-select formControlName="materialBaseId" required aria-label="Base material">
+            @for (base of materialBases(); track base.id) {
+              <mat-option [value]="base.id">{{ base.name }}</mat-option>
+            }
+          </mat-select>
+          @if (form.get('materialBaseId')!.hasError('required') && form.get('materialBaseId')!.touched) {
+            <mat-error>Base material is required</mat-error>
+          }
+        </mat-form-field>
+
+        <!-- Finish -->
+        <mat-form-field appearance="outline" class="form-field full-width">
+          <mat-label>Finish</mat-label>
+          <mat-select formControlName="materialFinishId" required aria-label="Material finish">
+            <mat-option [value]="''" disabled>Select a base material first</mat-option>
+            @for (finish of filteredFinishes(); track finish.id) {
+              <mat-option [value]="finish.id">{{ finish.name }}</mat-option>
+            }
+          </mat-select>
+          @if (form.get('materialFinishId')!.hasError('required') && form.get('materialFinishId')!.touched) {
+            <mat-error>Finish is required</mat-error>
+          }
+          @if (filteredFinishes().length === 0 && form.get('materialBaseId')!.value) {
+            <mat-hint>No finishes available for this material</mat-hint>
+          }
+        </mat-form-field>
+
+        <!-- Modifier (optional) -->
+        <mat-form-field appearance="outline" class="form-field full-width">
+          <mat-label>Modifier (optional)</mat-label>
+          <mat-select formControlName="materialModifierId" aria-label="Material modifier">
+            <mat-option [value]="null">None</mat-option>
+            @for (modifier of filteredModifiers(); track modifier.id) {
+              <mat-option [value]="modifier.id">{{ modifier.name }}</mat-option>
+            }
+          </mat-select>
+          @if (filteredModifiers().length === 0 && form.get('materialBaseId')!.value) {
+            <mat-hint>No modifiers available for this material</mat-hint>
+          }
+        </mat-form-field>
+      </div>
+
+      <!-- ── Spool Details Section ──────────────────────────── -->
+      <div class="form-section">
+        <h3 class="section-title">Spool Details</h3>
+
+        <!-- Brand -->
+        <mat-form-field appearance="outline" class="form-field full-width">
+          <mat-label>Brand</mat-label>
+          <input matInput formControlName="brand" required maxlength="200"
+                 placeholder="e.g., Bambu Lab, Polymaker" aria-label="Brand" />
+          @if (form.get('brand')!.hasError('required') && form.get('brand')!.touched) {
+            <mat-error>Brand is required</mat-error>
+          }
+        </mat-form-field>
+
+        <!-- Serial -->
+        <mat-form-field appearance="outline" class="form-field full-width">
+          <mat-label>Serial Number</mat-label>
+          <input matInput formControlName="spoolSerial" required maxlength="200"
+                 placeholder="e.g., SN-001" aria-label="Serial number" />
+          @if (form.get('spoolSerial')!.hasError('required') && form.get('spoolSerial')!.touched) {
+            <mat-error>Serial number is required</mat-error>
+          }
+        </mat-form-field>
+
+        <!-- Color Name + Color Hex (side by side) -->
+        <div class="form-row">
+          <mat-form-field appearance="outline" class="form-field">
+            <mat-label>Color Name</mat-label>
+            <input matInput formControlName="colorName" required maxlength="200"
+                   placeholder="e.g., Fire Engine Red" aria-label="Color name" />
+            @if (form.get('colorName')!.hasError('required') && form.get('colorName')!.touched) {
+              <mat-error>Color name is required</mat-error>
+            }
+          </mat-form-field>
+
+          <mat-form-field appearance="outline" class="form-field color-hex-field">
+            <mat-label>Color Hex</mat-label>
+            <input matInput formControlName="colorHex" required
+                   placeholder="#FF0000" maxlength="7" aria-label="Color hex code" />
+            <span matTextSuffix class="color-preview">
+              <span class="color-swatch-mini" [style.background-color]="form.get('colorHex')!.value"></span>
+            </span>
+            @if (form.get('colorHex')!.hasError('required') && form.get('colorHex')!.touched) {
+              <mat-error>Color hex is required</mat-error>
+            }
+            @if (form.get('colorHex')!.hasError('pattern') && form.get('colorHex')!.touched) {
+              <mat-error>Must be #RRGGBB format</mat-error>
+            }
+          </mat-form-field>
+        </div>
+      </div>
+
+      <!-- ── Weight & Dimensions Section ────────────────────── -->
+      <div class="form-section">
+        <h3 class="section-title">Weight &amp; Dimensions</h3>
+
+        <div class="form-row">
+          <!-- Diameter -->
+          <mat-form-field appearance="outline" class="form-field">
+            <mat-label>Diameter (mm)</mat-label>
+            <input matInput type="number" formControlName="filamentDiameterMm" required
+                   min="0.1" max="10" step="0.01" aria-label="Filament diameter in mm" />
+            @if (form.get('filamentDiameterMm')!.hasError('required') && form.get('filamentDiameterMm')!.touched) {
+              <mat-error>Diameter is required</mat-error>
+            }
+          </mat-form-field>
+        </div>
+
+        <div class="form-row">
+          <!-- Total Weight -->
+          <mat-form-field appearance="outline" class="form-field">
+            <mat-label>Total Weight (g)</mat-label>
+            <input matInput type="number" formControlName="weightTotalGrams" required
+                   min="0.01" max="100000" step="1" aria-label="Total spool weight in grams" />
+            <mat-hint>Full spool weight</mat-hint>
+            @if (form.get('weightTotalGrams')!.hasError('required') && form.get('weightTotalGrams')!.touched) {
+              <mat-error>Total weight is required</mat-error>
+            }
+          </mat-form-field>
+
+          <!-- Remaining Weight -->
+          <mat-form-field appearance="outline" class="form-field">
+            <mat-label>Remaining Weight (g)</mat-label>
+            <input matInput type="number" formControlName="weightRemainingGrams" required
+                   min="0" max="100000" step="1" aria-label="Remaining weight in grams" />
+            <mat-hint>Current remaining</mat-hint>
+            @if (form.get('weightRemainingGrams')!.hasError('required') && form.get('weightRemainingGrams')!.touched) {
+              <mat-error>Remaining weight is required</mat-error>
+            }
+            @if (form.get('weightRemainingGrams')!.hasError('exceedsTotal')) {
+              <mat-error>Cannot exceed total weight</mat-error>
+            }
+          </mat-form-field>
+        </div>
+      </div>
+
+      <!-- ── Purchase & Status Section ──────────────────────── -->
+      <div class="form-section">
+        <h3 class="section-title">Purchase &amp; Status</h3>
+
+        <div class="form-row">
+          <!-- Purchase Price -->
+          <mat-form-field appearance="outline" class="form-field">
+            <mat-label>Price</mat-label>
+            <input matInput type="number" formControlName="purchasePrice"
+                   min="0" max="1000000" step="0.01"
+                   placeholder="e.g., 25.00" aria-label="Purchase price" />
+            <span matTextSuffix>$</span>
+            @if (form.get('purchasePrice')!.hasError('min') && form.get('purchasePrice')!.touched) {
+              <mat-error>Price must be non-negative</mat-error>
+            }
+          </mat-form-field>
+
+          <!-- Purchase Date -->
+          <mat-form-field appearance="outline" class="form-field">
+            <mat-label>Purchase Date</mat-label>
+            <input matInput [matDatepicker]="picker" formControlName="purchaseDate"
+                   aria-label="Purchase date" />
+            <mat-datepicker-toggle matIconSuffix [for]="picker"></mat-datepicker-toggle>
+            <mat-datepicker #picker></mat-datepicker>
+          </mat-form-field>
+        </div>
+
+        <!-- Active Status -->
+        <div class="checkbox-row">
+          <mat-checkbox formControlName="isActive" aria-label="Active status">
+            Spool is active and available for use
+          </mat-checkbox>
+        </div>
+      </div>
+
+    </form>
+  }
+
+</mat-dialog-content>
+
+<!-- Dialog Actions -->
+<mat-dialog-actions align="end">
+  <button mat-button type="button" (click)="cancel()" [disabled]="saving()"
+          aria-label="Cancel">
+    Cancel
+  </button>
+  <button mat-raised-button color="primary" type="button" (click)="save()"
+          [disabled]="saving() || form.invalid" aria-label="Save filament">
+    @if (saving()) {
+      <mat-spinner diameter="20" class="btn-spinner"></mat-spinner>
+    }
+    {{ isEditMode() ? 'Save Changes' : 'Add Filament' }}
+  </button>
+</mat-dialog-actions>

frontend/src/app/components/filament-dialog/filament-dialog.component.scss

@@ -0,0 +1,175 @@
+/**
+ * Filament Dialog Styles
+ * Touch-optimized for kiosk (Raspberry Pi 5) and mobile PWA
+ */
+
+$touch-target-min: 48px;
+$spacing-unit: 8px;
+$color-error: #ef4444;
+
+// ── Dialog Layout ──────────────────────────────────────────
+
+.filament-dialog-content {
+  overflow-y: auto;
+  max-height: 70vh;
+  padding: 0 $spacing-unit * 2;
+
+  @media (max-width: 480px) {
+    padding: 0 $spacing-unit;
+  }
+}
+
+[mat-dialog-title] {
+  margin: 0 0 $spacing-unit * 2 0;
+  padding: $spacing-unit * 2 0 0 0;
+  font-size: 20px;
+  font-weight: 600;
+}
+
+// ── Loading State ──────────────────────────────────────────
+
+.dialog-loading {
+  display: flex;
+  flex-direction: column;
+  align-items: center;
+  justify-content: center;
+  padding: 48px $spacing-unit * 2;
+  color: var(--mat-sys-on-surface-variant);
+
+  p {
+    margin-top: $spacing-unit * 2;
+    font-size: 14px;
+  }
+}
+
+// ── Error Banner ───────────────────────────────────────────
+
+.error-banner {
+  display: flex;
+  align-items: center;
+  gap: $spacing-unit;
+  padding: $spacing-unit * 1.5 $spacing-unit * 2;
+  border-radius: 8px;
+  margin-bottom: $spacing-unit * 2;
+  background-color: rgba($color-error, 0.12);
+  color: $color-error;
+  border: 1px solid rgba($color-error, 0.3);
+  font-size: 14px;
+  font-weight: 500;
+
+  mat-icon {
+    font-size: 20px !important;
+    width: 20px !important;
+    height: 20px !important;
+  }
+}
+
+// ── Form Sections ──────────────────────────────────────────
+
+.form-section {
+  margin-bottom: $spacing-unit * 3;
+
+  .section-title {
+    font-size: 14px;
+    font-weight: 600;
+    text-transform: uppercase;
+    letter-spacing: 0.04em;
+    color: var(--mat-sys-on-surface-variant);
+    margin: 0 0 $spacing-unit * 1.5 0;
+    padding-bottom: $spacing-unit * 0.5;
+    border-bottom: 1px solid var(--mat-sys-outline-variant);
+  }
+}
+
+.filament-form {
+  display: flex;
+  flex-direction: column;
+  gap: $spacing-unit;
+}
+
+// ── Form Fields ────────────────────────────────────────────
+
+.form-field {
+  width: 100%;
+
+  // Touch target sizing
+  .mat-mdc-form-field-subscript-wrapper {
+    min-height: 20px;
+  }
+}
+
+.form-row {
+  display: flex;
+  gap: $spacing-unit * 2;
+  width: 100%;
+
+  .form-field {
+    flex: 1;
+  }
+
+  @media (max-width: 480px) {
+    flex-direction: column;
+    gap: 0;
+  }
+}
+
+// ── Color Hex Preview ──────────────────────────────────────
+
+.color-hex-field {
+  max-width: 180px;
+
+  @media (max-width: 480px) {
+    max-width: 100%;
+  }
+}
+
+.color-preview {
+  display: inline-flex;
+  align-items: center;
+  margin-left: 4px;
+}
+
+.color-swatch-mini {
+  display: inline-block;
+  width: 20px;
+  height: 20px;
+  border-radius: 4px;
+  border: 1px solid rgba(0, 0, 0, 0.12);
+  vertical-align: middle;
+}
+
+// ── Checkbox Row ───────────────────────────────────────────
+
+.checkbox-row {
+  display: flex;
+  align-items: center;
+  padding: $spacing-unit 0;
+
+  mat-checkbox {
+    min-height: $touch-target-min;
+    display: flex;
+    align-items: center;
+  }
+}
+
+// ── Save Button Spinner ────────────────────────────────────
+
+mat-dialog-actions {
+  padding: $spacing-unit $spacing-unit * 2 $spacing-unit * 2;
+  gap: $spacing-unit;
+
+  button {
+    min-height: $touch-target-min;
+    min-width: 100px;
+  }
+}
+
+.btn-spinner {
+  display: inline-block;
+  margin-right: $spacing-unit;
+  vertical-align: middle;
+
+  circle {
+    stroke: currentColor;
+  }
+}

frontend/src/app/components/filament-dialog/filament-dialog.component.ts

@@ -0,0 +1,277 @@
+import {
+  ChangeDetectionStrategy,
+  Component,
+  inject,
+  signal,
+  computed,
+} from '@angular/core';
+import { CommonModule } from '@angular/common';
+import { FormsModule, ReactiveFormsModule, FormBuilder, FormGroup, Validators } from '@angular/forms';
+import { MatDialogRef, MAT_DIALOG_DATA, MatDialogModule } from '@angular/material/dialog';
+import { MatFormFieldModule } from '@angular/material/form-field';
+import { MatInputModule } from '@angular/material/input';
+import { MatSelectModule } from '@angular/material/select';
+import { MatDatepickerModule } from '@angular/material/datepicker';
+import { MatNativeDateModule } from '@angular/material/core';
+import { MatCheckboxModule } from '@angular/material/checkbox';
+import { MatButtonModule } from '@angular/material/button';
+import { MatIconModule } from '@angular/material/icon';
+import { MatProgressSpinnerModule } from '@angular/material/progress-spinner';
+import { MatTooltipModule } from '@angular/material/tooltip';
+
+import { Filament } from '../../models/filament.model';
+import {
+  MaterialBase,
+  MaterialFinish,
+  MaterialModifier,
+} from '../../models/material.model';
+import {
+  FilamentService,
+  CreateFilamentRequest,
+  UpdateFilamentRequest,
+} from '../../services/filament.service';
+
+/** Data passed into the dialog from the opener. */
+export interface FilamentDialogData {
+  /** If provided, the dialog opens in edit mode with pre-populated fields. */
+  filament?: Filament;
+}
+
+@Component({
+  selector: 'app-filament-dialog',
+  standalone: true,
+  imports: [
+    CommonModule,
+    FormsModule,
+    ReactiveFormsModule,
+    MatDialogModule,
+    MatFormFieldModule,
+    MatInputModule,
+    MatSelectModule,
+    MatDatepickerModule,
+    MatNativeDateModule,
+    MatCheckboxModule,
+    MatButtonModule,
+    MatIconModule,
+    MatProgressSpinnerModule,
+    MatTooltipModule,
+  ],
+  templateUrl: './filament-dialog.component.html',
+  styleUrl: './filament-dialog.component.scss',
+  changeDetection: ChangeDetectionStrategy.OnPush,
+})
+export class FilamentDialogComponent {
+  private readonly dialogRef = inject(MatDialogRef<FilamentDialogComponent>);
+  private readonly data = inject<FilamentDialogData>(MAT_DIALOG_DATA);
+  private readonly fb = inject(FormBuilder);
+  private readonly filamentService = inject(FilamentService);
+
+  /** Whether this dialog is in edit mode (has existing filament data). */
+  readonly isEditMode = computed(() => !!this.data.filament);
+
+  /** Dialog title based on mode. */
+  readonly dialogTitle = computed(() =>
+    this.isEditMode() ? 'Edit Filament' : 'Add Filament'
+  );
+
+  // ── Lookup data signals ──────────────────────────────────
+
+  /** All material bases for the base material dropdown. */
+  readonly materialBases = signal<MaterialBase[]>([]);
+
+  /** Material finishes filtered by selected base material. */
+  readonly filteredFinishes = signal<MaterialFinish[]>([]);
+
+  /** Material modifiers filtered by selected base material. */
+  readonly filteredModifiers = signal<MaterialModifier[]>([]);
+
+  /** Whether material lookups are loading. */
+  readonly lookupsLoading = signal(true);
+
+  /** Whether the save operation is in progress. */
+  readonly saving = signal(false);
+
+  /** Server error message, if any. */
+  readonly serverError = signal<string | null>(null);
+
+  // ── Form ─────────────────────────────────────────────────
+
+  readonly form: FormGroup = this.fb.group({
+    materialBaseId: ['', Validators.required],
+    materialFinishId: ['', Validators.required],
+    materialModifierId: [null],
+    brand: ['', [Validators.required, Validators.maxLength(200)]],
+    colorName: ['', [Validators.required, Validators.maxLength(200)]],
+    colorHex: ['#000000', [Validators.required, Validators.pattern(/^#[0-9A-Fa-f]{6}$/)]],
+    weightTotalGrams: [1000, [Validators.required, Validators.min(0.01), Validators.max(100000)]],
+    weightRemainingGrams: [1000, [Validators.required, Validators.min(0), Validators.max(100000)]],
+    filamentDiameterMm: [1.75, [Validators.required, Validators.min(0.1), Validators.max(10)]],
+    spoolSerial: ['', [Validators.required, Validators.maxLength(200)]],
+    purchasePrice: [null, [Validators.min(0), Validators.max(1000000)]],
+    purchaseDate: [null],
+    isActive: [true],
+  });
+
+  constructor() {
+    this.loadLookups();
+    this.patchFormIfEditing();
+    this.setupCascadingFilters();
+  }
+
+  // ── Data loading ─────────────────────────────────────────
+
+  /** Load material bases, finishes, and modifiers for dropdowns. */
+  private loadLookups(): void {
+    this.lookupsLoading.set(true);
+    this.filamentService.getMaterialBases().subscribe({
+      next: (bases) => {
+        this.materialBases.set(bases);
+        this.lookupsLoading.set(false);
+      },
+      error: () => {
+        this.lookupsLoading.set(false);
+        this.serverError.set('Failed to load material options. Please try again.');
+      },
+    });
+  }
+
+  /** Pre-populate form fields when editing an existing filament. */
+  private patchFormIfEditing(): void {
+    if (this.data.filament) {
+      const f = this.data.filament;
+      this.form.patchValue({
+        materialBaseId: f.materialBaseId,
+        materialFinishId: f.materialFinishId,
+        materialModifierId: f.materialModifierId,
+        brand: f.brand,
+        colorName: f.colorName,
+        colorHex: f.colorHex,
+        weightTotalGrams: f.weightTotalGrams,
+        weightRemainingGrams: f.weightRemainingGrams,
+        filamentDiameterMm: f.filamentDiameterMm,
+        spoolSerial: f.spoolSerial,
+        purchasePrice: f.purchasePrice,
+        purchaseDate: f.purchaseDate ? new Date(f.purchaseDate) : null,
+        isActive: f.isActive,
+      });
+    }
+  }
+
+  /** Set up cascading filter: when base material changes, reload finishes & modifiers. */
+  private setupCascadingFilters(): void {
+    this.form.get('materialBaseId')!.valueChanges.subscribe((baseId: string | null) => {
+      // Clear dependent selections when base changes
+      this.form.get('materialFinishId')!.setValue('');
+      this.form.get('materialModifierId')!.setValue(null);
+      this.filteredFinishes.set([]);
+      this.filteredModifiers.set([]);
+
+      if (!baseId) return;
+
+      this.filamentService.getMaterialFinishes(baseId).subscribe({
+        next: (finishes) => this.filteredFinishes.set(finishes),
+        error: () => this.filteredFinishes.set([]),
+      });
+
+      this.filamentService.getMaterialModifiers(baseId).subscribe({
+        next: (modifiers) => this.filteredModifiers.set(modifiers),
+        error: () => this.filteredModifiers.set([]),
+      });
+    });
+
+    // If editing, trigger the cascading load for the pre-selected base
+    if (this.data.filament) {
+      const baseId = this.data.filament.materialBaseId;
+      // We need to load finishes and modifiers for the pre-selected base
+      // but also re-select the original finish and modifier after loading
+      this.filamentService.getMaterialFinishes(baseId).subscribe({
+        next: (finishes) => {
+          this.filteredFinishes.set(finishes);
+          // Re-patch finish after load
+          this.form.get('materialFinishId')!.setValue(this.data.filament!.materialFinishId);
+        },
+      });
+      this.filamentService.getMaterialModifiers(baseId).subscribe({
+        next: (modifiers) => {
+          this.filteredModifiers.set(modifiers);
+          // Re-patch modifier after load
+          this.form.get('materialModifierId')!.setValue(this.data.filament!.materialModifierId);
+        },
+      });
+    }
+  }
+
+  // ── Actions ──────────────────────────────────────────────
+
+  /** Cancel and close the dialog without saving. */
+  cancel(): void {
+    this.dialogRef.close(false);
+  }
+
+  /** Submit the form — creates or updates the filament. */
+  save(): void {
+    if (this.form.invalid) {
+      this.form.markAllAsTouched();
+      return;
+    }
+
+    // Cross-field validation: remaining weight must not exceed total weight
+    const total = this.form.value.weightTotalGrams;
+    const remaining = this.form.value.weightRemainingGrams;
+    if (remaining > total) {
+      this.form.get('weightRemainingGrams')!.setErrors({ exceedsTotal: true });
+      return;
+    }
+
+    this.saving.set(true);
+    this.serverError.set(null);
+
+    const formValue = this.form.value;
+    const request: CreateFilamentRequest | UpdateFilamentRequest = {
+      materialBaseId: formValue.materialBaseId,
+      materialFinishId: formValue.materialFinishId,
+      materialModifierId: formValue.materialModifierId || null,
+      brand: formValue.brand.trim(),
+      colorName: formValue.colorName.trim(),
+      colorHex: formValue.colorHex,
+      weightTotalGrams: formValue.weightTotalGrams,
+      weightRemainingGrams: formValue.weightRemainingGrams,
+      filamentDiameterMm: formValue.filamentDiameterMm,
+      spoolSerial: formValue.spoolSerial.trim(),
+      purchasePrice: formValue.purchasePrice ?? null,
+      purchaseDate: formValue.purchaseDate
+        ? new Date(formValue.purchaseDate).toISOString()
+        : null,
+      isActive: formValue.isActive,
+    };
+
+    if (this.isEditMode()) {
+      const id = this.data.filament!.id;
+      this.filamentService.updateFilament(id, request).subscribe({
+        next: (updated) => {
+          this.saving.set(false);
+          this.dialogRef.close(true);
+        },
+        error: (err) => {
+          this.saving.set(false);
+          this.serverError.set(
+            err?.error?.error || err?.message || 'Failed to update filament. Please try again.'
+          );
+        },
+      });
+    } else {
+      this.filamentService.createFilament(request).subscribe({
+        next: (created) => {
+          this.saving.set(false);
+          this.dialogRef.close(true);
+        },
+        error: (err) => {
+          this.saving.set(false);
+          this.serverError.set(
+            err?.error?.error || err?.message || 'Failed to create filament. Please try again.'
+          );
+        },
+      });
+    }
+  }
+}

frontend/src/app/components/filament-table/filament-table.component.html

@@ -83,6 +83,35 @@
       </td>
     </ng-container>
 
+    <!-- Cost Column -->
+    <ng-container matColumnDef="cost">
+      <th mat-header-cell *matHeaderCellDef mat-sort-header="cost">Cost</th>
+      <td mat-cell *matCellDef="let filament">
+        <div class="cost-cell">
+          @if (filament.purchasePrice !== null) {
+            <span class="cost-price">{{ formatCurrency(filament.purchasePrice) }}</span>
+            @let cpg = getCostPerGram(filament);
+            @if (cpg !== null) {
+              <span class="cost-per-gram">${{ cpg.toFixed(2) }}/g</span>
+            }
+          } @else {
+            <span class="cost-unknown">&mdash;</span>
+          }
+        </div>
+      </td>
+    </ng-container>
+
+    <!-- Usage Column -->
+    <ng-container matColumnDef="usage">
+      <th mat-header-cell *matHeaderCellDef mat-sort-header="usage">Usage</th>
+      <td mat-cell *matCellDef="let filament">
+        <div class="usage-cell">
+          <span class="usage-grams">{{ formatWeight(getGramsUsed(filament)) }} used</span>
+          <span class="usage-remaining">{{ formatWeight(filament.weightRemainingGrams) }} left</span>
+        </div>
+      </td>
+    </ng-container>
+
     <!-- Stock Level Indicator Column -->
     <ng-container matColumnDef="stockLevel">
       <th mat-header-cell *matHeaderCellDef mat-sort-header="stockLevel">Stock</th>

frontend/src/app/components/filament-table/filament-table.component.scss

@@ -55,7 +55,7 @@ $color-inactive: #94a3b8;  // Gray — inactive spool
 // Table styling
 .filament-table {
   width: 100%;
-  min-width: 700px;
+  min-width: 900px;
 
   th {
     font-weight: 600;
@@ -132,6 +132,48 @@ $color-inactive: #94a3b8;  // Gray — inactive spool
   letter-spacing: 0.02em;
 }
 
+// Cost cell
+.cost-cell {
+  display: flex;
+  flex-direction: column;
+  gap: 2px;
+  min-width: 80px;
+
+  .cost-price {
+    font-weight: 600;
+    color: var(--mat-sys-on-surface);
+  }
+
+  .cost-per-gram {
+    font-size: 11px;
+    color: var(--mat-sys-on-surface-variant);
+    letter-spacing: 0.02em;
+  }
+
+  .cost-unknown {
+    color: var(--mat-sys-on-surface-variant);
+    font-style: italic;
+  }
+}
+
+// Usage cell
+.usage-cell {
+  display: flex;
+  flex-direction: column;
+  gap: 2px;
+  min-width: 100px;
+
+  .usage-grams {
+    font-weight: 500;
+    color: var(--mat-sys-on-surface);
+  }
+
+  .usage-remaining {
+    font-size: 12px;
+    color: var(--mat-sys-on-surface-variant);
+  }
+}
+
 // Remaining weight cell
 .remaining-cell {
   display: flex;

frontend/src/app/components/filament-table/filament-table.component.ts

@@ -30,6 +30,8 @@ export type FilamentColumn =
   | 'brand'
   | 'serial'
   | 'remaining'
+  | 'cost'
+  | 'usage'
   | 'stockLevel'
   | 'status';
 
@@ -70,6 +72,8 @@ export class FilamentTableComponent implements OnInit {
     'brand',
     'serial',
     'remaining',
+    'cost',
+    'usage',
     'stockLevel',
     'status',
   ]);
@@ -143,6 +147,18 @@ export class FilamentTableComponent implements OnInit {
             getRemainingPercent(b),
             isAsc
           );
+        case 'cost':
+          return compare(
+            a.purchasePrice ?? 0,
+            b.purchasePrice ?? 0,
+            isAsc
+          );
+        case 'usage':
+          return compare(
+            a.weightTotalGrams - a.weightRemainingGrams,
+            b.weightTotalGrams - b.weightRemainingGrams,
+            isAsc
+          );
         case 'stockLevel':
           return compare(
             stockLevelOrder(classifyStockLevel(a)),
@@ -243,6 +259,29 @@ export class FilamentTableComponent implements OnInit {
     }
     return `${Math.round(grams)}g`;
   }
+
+  /** Template helper: format currency */
+  formatCurrency(value: number): string {
+    return new Intl.NumberFormat('en-US', {
+      style: 'currency',
+      currency: 'USD',
+      minimumFractionDigits: 2,
+      maximumFractionDigits: 2,
+    }).format(value);
+  }
+
+  /** Template helper: compute cost per gram for a filament */
+  getCostPerGram(filament: Filament): number | null {
+    if (filament.purchasePrice === null || filament.purchasePrice === 0 || filament.weightTotalGrams <= 0) {
+      return null;
+    }
+    return filament.purchasePrice / filament.weightTotalGrams;
+  }
+
+  /** Template helper: compute grams used for a filament */
+  getGramsUsed(filament: Filament): number {
+    return filament.weightTotalGrams - filament.weightRemainingGrams;
+  }
 }
 
 /** Compare helper for sorting */

frontend/src/app/components/inventory-summary/inventory-summary.component.html

@@ -87,6 +87,43 @@
       </div>
     </div>
 
+    <!-- Average Cost per Gram -->
+    @if (avgCostPerGram() !== null) {
+      <div class="summary-item metric-card"
+           matTooltip="Average cost per gram across priced, active spools"
+           matTooltipPosition="below">
+        <mat-icon aria-hidden="true" class="metric-icon">scale</mat-icon>
+        <div class="metric-content">
+          <span class="metric-value">${{ avgCostPerGram()!.toFixed(2) }}/g</span>
+          <span class="metric-label">Avg Cost/g</span>
+        </div>
+      </div>
+    }
+
+    <!-- Total Usage -->
+    <div class="summary-item metric-card"
+         matTooltip="Total filament used across all spools"
+         matTooltipPosition="below">
+      <mat-icon aria-hidden="true" class="metric-icon">trending_down</mat-icon>
+      <div class="metric-content">
+        <span class="metric-value">{{ formatWeight(totalGramsUsed()) }}</span>
+        <span class="metric-label">Total Used</span>
+      </div>
+    </div>
+
+    <!-- Estimated Used Value -->
+    @if (estimatedUsedValue() !== null) {
+      <div class="summary-item metric-card"
+           matTooltip="Estimated value of filament consumed"
+           matTooltipPosition="below">
+        <mat-icon aria-hidden="true" class="metric-icon">receipt_long</mat-icon>
+        <div class="metric-content">
+          <span class="metric-value">{{ formatCurrency(estimatedUsedValue()!) }}</span>
+          <span class="metric-label">Used Value</span>
+        </div>
+      </div>
+    }
+
     <!-- Overall Remaining Stock Bar -->
     <div class="summary-item metric-card stock-bar-card"
          matTooltip="{{ formatWeight(totalRemainingGrams()) }} of {{ formatWeight(totalCapacityGrams()) }} remaining"

frontend/src/app/components/inventory-summary/inventory-summary.component.ts

@@ -88,6 +88,37 @@ export class InventorySummaryComponent implements OnInit, OnDestroy {
       .reduce((sum, f) => sum + (f.purchasePrice ?? 0), 0)
   );
 
+  /** Computed: average cost per gram across active spools with a price */
+  readonly avgCostPerGram = computed(() => {
+    const priced = this.filaments().filter(
+      (f) => f.isActive && f.purchasePrice !== null && f.purchasePrice! > 0 && f.weightTotalGrams > 0
+    );
+    if (priced.length === 0) return null;
+    const totalCost = priced.reduce((sum, f) => sum + f.purchasePrice!, 0);
+    const totalWeight = priced.reduce((sum, f) => sum + f.weightTotalGrams, 0);
+    return totalWeight > 0 ? totalCost / totalWeight : null;
+  });
+
+  /** Computed: total grams used across all spools */
+  readonly totalGramsUsed = computed(() =>
+    this.filaments().reduce(
+      (sum, f) => sum + (f.weightTotalGrams - f.weightRemainingGrams),
+      0
+    )
+  );
+
+  /** Computed: total estimated value of used filament */
+  readonly estimatedUsedValue = computed(() => {
+    const priced = this.filaments().filter(
+      (f) => f.isActive && f.purchasePrice !== null && f.purchasePrice! > 0 && f.weightTotalGrams > 0
+    );
+    if (priced.length === 0) return null;
+    return priced.reduce((sum, f) => {
+      const usedFraction = (f.weightTotalGrams - f.weightRemainingGrams) / f.weightTotalGrams;
+      return sum + f.purchasePrice! * usedFraction;
+    }, 0);
+  });
+
   /** Computed: total remaining weight across all spools in grams */
   readonly totalRemainingGrams = computed(() =>
     this.filaments().reduce((sum, f) => sum + f.weightRemainingGrams, 0)
@@ -169,8 +200,8 @@ export class InventorySummaryComponent implements OnInit, OnDestroy {
     return new Intl.NumberFormat('en-US', {
       style: 'currency',
       currency: 'USD',
-      minimumFractionDigits: 0,
+      minimumFractionDigits: 2,
-      maximumFractionDigits: 0,
+      maximumFractionDigits: 2,
     }).format(value);
   }
 }

frontend/src/app/models/material.model.ts

@@ -0,0 +1,50 @@
+/**
+ * Material lookup models matching the Extrudex backend Material DTOs.
+ * Used for populating dropdowns in the filament add/edit form.
+ */
+
+/** Material base (e.g., PLA, PETG, ABS). */
+export interface MaterialBase {
+  /** Unique identifier. */
+  id: string;
+  /** Human-readable name (e.g., "PLA", "PETG"). */
+  name: string;
+  /** Density in g/cm³. */
+  densityGperCm3: number;
+  /** Created timestamp (UTC). */
+  createdAt: string;
+  /** Updated timestamp (UTC). */
+  updatedAt: string;
+}
+
+/** Material finish (e.g., Basic, Matte, Silk). */
+export interface MaterialFinish {
+  /** Unique identifier. */
+  id: string;
+  /** Human-readable name (e.g., "Basic", "Matte"). */
+  name: string;
+  /** Foreign key to the parent material base. */
+  materialBaseId: string;
+  /** Name of the parent material base (for display). */
+  materialBaseName: string;
+  /** Created timestamp (UTC). */
+  createdAt: string;
+  /** Updated timestamp (UTC). */
+  updatedAt: string;
+}
+
+/** Material modifier (e.g., Carbon Fiber, Wood Fill). Optional. */
+export interface MaterialModifier {
+  /** Unique identifier. */
+  id: string;
+  /** Human-readable name (e.g., "Carbon Fiber"). */
+  name: string;
+  /** Foreign key to the parent material base. */
+  materialBaseId: string;
+  /** Name of the parent material base (for display). */
+  materialBaseName: string;
+  /** Created timestamp (UTC). */
+  createdAt: string;
+  /** Updated timestamp (UTC). */
+  updatedAt: string;
+}

frontend/src/app/models/paged-response.model.ts

@@ -0,0 +1,13 @@
+/**
+ * Generic paged response wrapper matching the Extrudex backend PagedResponse<T>.
+ */
+export interface PagedResponse<T> {
+  /** The items in this page. */
+  items: T[];
+  /** Total number of items across all pages. */
+  totalCount: number;
+  /** The current page number (1-based). */
+  pageNumber: number;
+  /** The number of items per page. */
+  pageSize: number;
+}

frontend/src/environments/environment.prod.ts

@@ -0,0 +1,8 @@
+/**
+ * Environment configuration for the Extrudex frontend (production).
+ * Override API URL for deployed environments.
+ */
+export const environment = {
+  production: true,
+  apiBaseUrl: '/api',
+};

frontend/src/environments/environment.ts

@@ -0,0 +1,8 @@
+/**
+ * Environment configuration for the Extrudex frontend.
+ * Replace API URL with the actual backend endpoint in production.
+ */
+export const environment = {
+  production: false,
+  apiBaseUrl: 'http://localhost:5000',
+};