CubeCraft-Creations/remote-rig
11
0
Fork 0
generated from CubeCraft-Creations/Tracehound
Code Issues 9 Pull Requests 1 Actions Packages Projects Releases 1 Wiki Activity

fix: enlarge case for selected ESP modules and wiring

Browse Source
This commit is contained in:
Hermes
2026-05-23 00:51:09 +00:00
parent 2f9020f672
commit 747f151c22
6 changed files with 28 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files
hardware/README.md
+9 -7
View File
@@ -1,7 +1,7 @@
# RemoteRig — Camera Node Hardware Design
> **Version:** 0.2.0 | **Status:** Draft
> **Target:** GoPro Hero 3 Black/Silver + ESP8266 + ESP32 + USB power bank
> **Target:** GoPro Hero 3 Black/Silver + ESP-01S/ESP8266 + ESP32-C3 Super Mini + USB power bank
## Overview
@@ -29,8 +29,8 @@ Each camera node is two ESP boards in a small case that clips to the tripod/stan
| Item | Qty | Cost | Notes |
|------|-----|------|-------|
| ESP32 Dev Board | 1 | ~$5 | MQTT bridge — talks to hub |
| ESP8266 D1 Mini | 1 | ~$3 | Camera bridge — talks to GoPro |
| ESP32-C3 Super Mini | 1 | ~$5 | MQTT bridge — talks to hub; board footprint 22.5 × 18.0mm |
| ESP-01S / ESP8266 | 1 | ~$3 | Camera bridge — talks to GoPro; module envelope 24.7 × 14.3 × 12.0mm |
| USB power bank (5000mAh+) | 1 | ~$10 | Powers both boards + GoPro |
| Micro-USB cable (short) | 2 | ~$2 | Power bank → boards + GoPro |
| Jumper wires F-F | 3 | ~$0.25 | UART TX/RX/GND between boards |
@@ -45,8 +45,8 @@ Each camera node is two ESP boards in a small case that clips to the tripod/stan
**Pipeline:** `hardware/DESIGN_PIPELINE.md`
Four exported prototype files:
1. **Case body** — holds both boards stacked, cable ports, rear dovetail-style receiver
2. **Case lid** — screw-on cover with ventilation
1. **Case body** — holds both boards side-by-side with extra wiring/service clearance, cable ports, rear mounting boss
2. **Case lid** — screw-on cover with ventilation and underside locating lip for flush seating
3. **Tripod clamp** — separate screw-tightened C-clamp sized around a 35mm stand/pole
4. **Full preview** — combined visualization STL only, not intended as the print job
@@ -105,8 +105,10 @@ The ESP8266 and GoPro talk over Wi-Fi — **no data cable between them**. The on
| | W × D × H (mm) |
|---|---|
| Case body external | ~56.8 × 36.6 × 19.0 |
| Lid external | ~56.8 × 32.8 × 4.0 |
| Board envelope basis | ESP32-C3 Super Mini: 22.5 × 18.0; ESP-01S: 24.7 × 14.3 × 12.0 |
| Internal CAD allowance | ~71.2 × 34.0 × 22.0; intentionally includes wiring gutters and vertical connector clearance |
| Case body external | ~76.0 × 42.6 × 26.0 including rear mount boss depth; main shell ~76.0 × 38.8 × 26.0 |
| Lid external | ~76.0 × 38.8 × 3.6; includes 1.6mm underside locating lip |
| Tripod clamp | ~43.0 × 53.5 × 16.0 |
| Clamp-to-case mount | Two side-by-side M3 screws through flat mounting plate |
| Clamp pole fit | Nominal 35mm; smaller poles TBD / may need inserts |