CubeCraft-Creations/remote-rig
11
0
Fork 0
generated from CubeCraft-Creations/Tracehound
Code Issues 9 Pull Requests 1 Actions Packages Projects Releases 1 Wiki Activity

fix: add camera node USB power ports
CI/CD / lint-and-typecheck (pull_request) Successful in 7s
Details
CI/CD / test (pull_request) Successful in 7s
Details
CI/CD / build (pull_request) Failing after 9s
Details
CI/CD / deploy (pull_request) Has been skipped
Details

Browse Source
This commit is contained in:
Hermes
2026-05-23 13:33:06 +00:00
parent af68bfaa3a
commit 9a50d0c801
7 changed files with 41104 additions and 32927 deletions
Download Patch File Download Diff File Expand all files Collapse all files
hardware/DESIGN_PIPELINE.md
+6 -5
View File
@@ -23,7 +23,7 @@
**Design direction:**
- Stand-mounted upright camera node enclosure; the case still does **not** mount to the GoPro.
- Visual direction now matches the original green appliance-style reference: tall vertical body, large inset front panel, centered OLED near the upper third, blank middle area, two long rounded lower slots, and bottom-center cable exit.
- Visual direction now matches the original green appliance-style reference: tall vertical body, large inset front panel, centered OLED near the upper third, blank middle area, two long rounded lower slots, bottom USB-C female power input, and right-side USB-A female passthrough power port for the GoPro.
- This replaces the rejected wide/low generic electronics-box layout from the first v4 attempt.
- Primary mounting is reusable cloth zip ties / Velcro straps through low-profile external rear belt-loop channels, not a clamp/dovetail.
- Front has a recessed/flush full-height service lid similar to a field-service status panel.
@@ -33,8 +33,8 @@
- single 3 mm RGB status LED replacing red/green status LEDs.
- small rocker on/off switch.
- two long rounded lower front slots styled after the reference.
- Front-panel screen, LED, rocker, cable-relief, and lower-slot openings are actual through-cuts through the full lid and locating lip so the back side of the printed lid is not skinned over.
- Body includes screw bosses, recessed lid pocket, lid locating geometry, bottom cable exit/strain-relief notch, and two rear horizontal external belt-loop strap channels to resist rotation on a stand.
- Front-panel screen, LED, rocker, and lower-slot openings are actual through-cuts through the full lid and locating lip so the back side of the printed lid is not skinned over.
- Body includes screw bosses, recessed lid pocket, lid locating geometry, a bottom USB-C female power inlet cutout, a right-side USB-A female passthrough power cutout, and two rear horizontal external belt-loop strap channels to resist rotation on a stand.
- Internal envelope is sized for known module dimensions plus service clearance:
- ESP32-C3 Super Mini: 22.5 × 18 mm.
- ESP-01S: ~24.7 × 14.3 × 12 mm.
@@ -65,7 +65,8 @@ BAT 87% LINK OK
- current-limiting resistor placement.
- Wiring/service:
- USB cable diameter and bend radius.
- whether power enters through bottom notch, side notch, or panel connector.
- bottom USB-C female panel/breakout connector flange, body depth, and mounting requirements.
- right-side USB-A female panel/breakout connector flange, body depth, and mounting requirements for GoPro 5 V passthrough.
- actual regulator/power distribution board footprint if used.
- Fasteners:
- M2 vs M2.5 vs self-tapping screws for lid.
@@ -78,7 +79,7 @@ BAT 87% LINK OK
- rear strap bridge bridging/support behavior.
- body/lid fit after PETG shrinkage.
- lid lip clearance and screw boss robustness.
- cable notch strength and strain relief.
- USB-C/USB-A cutout edge quality, wall strength, and connector retention/strain relief.
**Suggested OpenSCAD validation/export commands:**