fix: make camera case cutouts visible

2026-05-23 13:09:45 +00:00
parent bbc6b1ea05
commit af68bfaa3a
8 changed files with 76259 additions and 11852 deletions
@@ -68,6 +68,7 @@ Simple per-part OpenSCAD wrappers are included:
 - `hardware/case/camera-node-case-v4-body.scad`
 - `hardware/case/camera-node-case-v4-lid.scad`
 - `hardware/case/camera-node-case-v4-preview.scad`
+- `hardware/case/camera-node-case-v4-front-review.scad`

 Example CLI exports, if OpenSCAD is installed:

@@ -75,6 +76,7 @@ Example CLI exports, if OpenSCAD is installed:
 openscad -o hardware/case/camera-node-case-v4-body.stl hardware/case/camera-node-case-v4-body.scad
 openscad -o hardware/case/camera-node-case-v4-lid.stl hardware/case/camera-node-case-v4-lid.scad
 openscad -o hardware/case/camera-node-case-v4-preview.stl hardware/case/camera-node-case-v4-preview.scad
+openscad -o hardware/case/camera-node-case-v4-front-review.stl hardware/case/camera-node-case-v4-front-review.scad
 ```

 Or render the main file directly:
@@ -83,8 +85,11 @@ Or render the main file directly:
 openscad -D 'part="body"' -o hardware/case/camera-node-case-v4-body.stl hardware/case/camera-node-case-v4.scad
 openscad -D 'part="lid"' -o hardware/case/camera-node-case-v4-lid.stl hardware/case/camera-node-case-v4.scad
 openscad -D 'part="preview"' -o hardware/case/camera-node-case-v4-preview.stl hardware/case/camera-node-case-v4.scad
+openscad -D 'part="front_review"' -o hardware/case/camera-node-case-v4-front-review.stl hardware/case/camera-node-case-v4.scad
 ```

+`camera-node-case-v4-preview.stl` is the seated fit-check assembly. `camera-node-case-v4-front-review.stl` is a non-print review layout with the body and front panel separated so the OLED, LED, rocker, cable-relief, and lower-slot cutouts are obvious in a slicer.
+
 ### Print Settings

 - **Material:** PETG preferred for heat/outdoor use and strap-tab durability.