CubeCraft-Creations/remote-rig
11
0
Fork 0
generated from CubeCraft-Creations/Tracehound
Code Issues 9 Pull Requests 1 Actions Packages Projects Releases 1 Wiki Activity

net: re-address hub network 10.60.1.0/24 -> 192.168.8.0/24
CI/CD / lint-and-typecheck (push) Successful in 9s
Details
CI/CD / test (push) Successful in 7s
Details
CI/CD / build (push) Failing after 1m21s
Details
CI/CD / deploy (push) Has been skipped
Details
Build (Dev) / build (push) Failing after 5m1s
Details

Browse Source 
The project was designed around a 10.60.1.0/24 travel-router network,
but the actual RemoteRig router uses 192.168.8.0/24 (the C6 associates
and gets 192.168.8.x; hub confirmed at 192.168.8.56). Replace the
network prefix everywhere (last octet preserved; GoPro 10.5.5.1 left
alone).

- scripts/setup-pi.sh: static IP 192.168.8.56/24, gateway 192.168.8.1,
  deploy/health command examples updated
- esp32-mqtt-bridge.cpp: default mqtt_broker -> 192.168.8.56
- firmware/data/config.json: broker -> 192.168.8.56 (wifi_password kept
  blank in git; real value flashed to the device only)
- docs (CONTEXT, MQTT_CONTRACT, READMEs, wireframes): gateway/hub/DHCP
  and example IPs re-addressed for consistency

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
This commit is contained in:
Joshua King
2026-06-05 07:47:57 -04:00
parent f6a25fc324
commit b0062f1373
8 changed files with 30 additions and 30 deletions
Download Patch File Download Diff File Expand all files Collapse all files
firmware/README.md
+3 -3
View File
@@ -14,7 +14,7 @@ Each camera node uses **two boards** connected via UART — zero network switchi
│ (Camera Bridge) │ RX←──────TX │ (MQTT Bridge) │
│ │ 115200 │ │
│ STA → GoPro AP │ 8N1 │ STA → Travel Router │
│ HTTP → 10.5.5.1 │ │ MQTT → 10.60.1.56│
│ HTTP → 10.5.5.1 │ │ MQTT → 192.168.8.56│
│ Start/stop/status │ │ Hub registration │
└─────────────────────┘ └──────────────────────┘
```
@@ -22,7 +22,7 @@ Each camera node uses **two boards** connected via UART — zero network switchi
| Board | Job | Network | Protocol |
|-------|-----|---------|----------|
| ESP8266 | Camera control | GoPro AP only (10.5.5.1) | HTTP → UART JSON |
| ESP32 | Hub relay | Travel router only (10.60.1.x) | UART JSON → MQTT |
| ESP32 | Hub relay | Travel router only (192.168.8.x) | UART JSON → MQTT |
## Quick Start
@@ -75,7 +75,7 @@ JSON-per-line at 115200 8N1. GPIO16 on both boards.
|-----|---------|-------------|
| `wifi_ssid` | `"RemoteRig"` | Travel router SSID |
| `wifi_password` | `""` | Travel router password |
| `mqtt_broker` | `"10.60.1.56"` | Pi Zero 2 W IP |
| `mqtt_broker` | `"192.168.8.56"` | Pi Zero 2 W IP |
| `mqtt_port` | `1883` | Mosquitto port |
| `camera_id` | `""` | Assigned by hub on first announce (leave empty) |
| `heartbeat_interval_sec` | `60` | MQTT heartbeat frequency |