CubeCraft-Creations/remote-rig
11
0
Fork 0
generated from CubeCraft-Creations/Tracehound
Code Issues 9 Pull Requests 1 Actions Packages Projects Releases 1 Wiki Activity

fix: add camera node IPEX antenna hole
CI/CD / lint-and-typecheck (pull_request) Successful in 7s
Details
CI/CD / test (pull_request) Successful in 8s
Details
CI/CD / build (pull_request) Failing after 9s
Details
CI/CD / deploy (pull_request) Has been skipped
Details

Browse Source
This commit is contained in:
Hermes
2026-05-23 14:36:22 +00:00
parent d89f9dc20b
commit f118b890f0
7 changed files with 23809 additions and 13535 deletions
Download Patch File Download Diff File Expand all files Collapse all files
hardware/DESIGN_PIPELINE.md
+5 -4
View File
@@ -23,7 +23,7 @@
**Design direction:**
- Stand-mounted upright camera node enclosure; the case still does **not** mount to the GoPro.
- Visual direction now matches the original green appliance-style reference: tall vertical body, large inset front panel, centered OLED near the upper third, blank middle area, two long rounded lower slots, bottom USB-C female power input, and right-side USB-A female passthrough power port for the GoPro.
- Visual direction now matches the original green appliance-style reference: tall vertical body, large inset front panel, centered OLED near the upper third, blank middle area, two long rounded lower slots, bottom USB-C female power input, right-side USB-A female passthrough power port for the GoPro, and left-side IPEX/U.FL antenna pigtail/connector exit opposite the USB-A.
- This replaces the rejected wide/low generic electronics-box layout from the first v4 attempt.
- Primary mounting is reusable cloth zip ties / Velcro straps through two low-profile vertical rear brackets with long lateral side-feed openings, not a clamp/dovetail.
- Front has a recessed/flush full-height service lid similar to a field-service status panel.
@@ -34,7 +34,7 @@
- small rocker on/off switch.
- two long rounded lower front slots styled after the reference.
- Front-panel screen, LED, rocker, and lower-slot openings are actual through-cuts through the full lid and locating lip so the back side of the printed lid is not skinned over.
- Body includes screw bosses, recessed lid pocket, lid locating geometry, a bottom USB-C female power inlet cutout, a right-side USB-A female passthrough power cutout, and two vertical external rear zip-tie/Velcro brackets to resist rotation on a stand. The zip ties feed laterally through long side windows behind the raised bridge faces; the old top-to-bottom feed-through tunnel is intentionally closed by top/bottom anchor pads.
- Body includes screw bosses, recessed lid pocket, lid locating geometry, a bottom USB-C female power inlet cutout, a right-side USB-A female passthrough power cutout, a left-side 5.0 mm prototype IPEX/U.FL antenna pigtail/connector through-hole with shallow exterior recess, and two vertical external rear zip-tie/Velcro brackets to resist rotation on a stand. The zip ties feed laterally through long side windows behind the raised bridge faces; the old top-to-bottom feed-through tunnel is intentionally closed by top/bottom anchor pads.
- Internal envelope is sized for known module dimensions plus service clearance:
- ESP32-C3 Super Mini: 22.5 × 18 mm.
- ESP-01S: ~24.7 × 14.3 × 12 mm.
@@ -67,6 +67,7 @@ BAT 87% LINK OK
- USB cable diameter and bend radius.
- bottom USB-C female panel/breakout connector flange, body depth, and mounting requirements.
- right-side USB-A female panel/breakout connector flange, body depth, and mounting requirements for GoPro 5 V passthrough.
- left-side IPEX/U.FL antenna pigtail/bulkhead exact outside diameter, retention/flange needs, bend radius, strain relief, and whether the current 5.0 mm prototype through-hole plus 8.5 mm shallow exterior recess should change before production.
- actual regulator/power distribution board footprint if used.
- Fasteners:
- M2 vs M2.5 vs self-tapping screws for lid.
@@ -80,7 +81,7 @@ BAT 87% LINK OK
- rear vertical zip-tie bracket top/bottom anchor-pad and bridge strength, and whether the lateral side-feed openings print cleanly without supports.
- body/lid fit after PETG shrinkage.
- lid lip clearance and screw boss robustness.
- USB-C/USB-A cutout edge quality, wall strength, and connector retention/strain relief.
- USB-C/USB-A and IPEX antenna exit cutout edge quality, wall strength, and connector retention/strain relief.
**Suggested OpenSCAD validation/export commands:**
@@ -91,7 +92,7 @@ openscad -o /tmp/camera-node-case-v4-preview.stl hardware/case/camera-node-case-
openscad -o /tmp/camera-node-case-v4-front-review.stl hardware/case/camera-node-case-v4-front-review.scad
```
Latest validation: OpenSCAD reports `Simple: yes`; trimesh confirms body, lid, preview, and front-review STLs are watertight. Body and lid each export as a single connected printable component; preview includes separate non-print board guide volumes by design. A rear-bracket sanity check confirms both vertical brackets have clear non-solid lateral X-direction side-feed volumes behind the raised bridge faces, while the rear wall, bridge faces, and top/bottom anchor pads remain solid.
Latest validation: OpenSCAD reports `Simple: yes`; trimesh confirms body, lid, preview, and front-review STLs are watertight. Body and lid each export as a single connected printable component; preview includes separate non-print board/connector guide volumes by design. A rear-bracket sanity check confirms both vertical brackets have clear non-solid lateral X-direction side-feed volumes behind the raised bridge faces, while the rear wall, bridge faces, and top/bottom anchor pads remain solid. The left-side IPEX/U.FL antenna hole is a through-wall cut to the interior cavity, not a blind exterior pocket.
Or with the main parametric selector: