The project was designed around a 10.60.1.0/24 travel-router network,
but the actual RemoteRig router uses 192.168.8.0/24 (the C6 associates
and gets 192.168.8.x; hub confirmed at 192.168.8.56). Replace the
network prefix everywhere (last octet preserved; GoPro 10.5.5.1 left
alone).
- scripts/setup-pi.sh: static IP 192.168.8.56/24, gateway 192.168.8.1,
deploy/health command examples updated
- esp32-mqtt-bridge.cpp: default mqtt_broker -> 192.168.8.56
- firmware/data/config.json: broker -> 192.168.8.56 (wifi_password kept
blank in git; real value flashed to the device only)
- docs (CONTEXT, MQTT_CONTRACT, READMEs, wireframes): gateway/hub/DHCP
and example IPs re-addressed for consistency
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Defines topic hierarchy, payload schemas, QoS levels, heartbeat
protocol, camera auto-discovery via announce topic, offline
buffering strategy, and command/response flow for start/stop.
Architecture: travel router subnet (192.168.4.x), Pi Zero 2 W
runs Mosquitto + Go backend, ESP32s dual-STA to GoPro AP +
travel router. No internet dependency.
Closes CUB-238.
Joshua King
Hermes