remote-rig

The project was designed around a 10.60.1.0/24 travel-router network,
but the actual RemoteRig router uses 192.168.8.0/24 (the C6 associates
and gets 192.168.8.x; hub confirmed at 192.168.8.56). Replace the
network prefix everywhere (last octet preserved; GoPro 10.5.5.1 left
alone).

- scripts/setup-pi.sh: static IP 192.168.8.56/24, gateway 192.168.8.1,
  deploy/health command examples updated
- esp32-mqtt-bridge.cpp: default mqtt_broker -> 192.168.8.56
- firmware/data/config.json: broker -> 192.168.8.56 (wifi_password kept
  blank in git; real value flashed to the device only)
- docs (CONTEXT, MQTT_CONTRACT, READMEs, wireframes): gateway/hub/DHCP
  and example IPs re-addressed for consistency

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

2026-06-05 07:47:57 -04:00

camera-auto-discovery.md

CUB-229: Design camera auto-discovery and registration flow

2026-05-23 10:06:50 -04:00

camera-dashboard-preview.html

CUB-178: camera monitoring dashboard wireframes and design specs

2026-05-23 12:10:18 -04:00

camera-dashboard-wireframes.md

net: re-address hub network 10.60.1.0/24 -> 192.168.8.0/24

2026-06-05 07:47:57 -04:00

esp01s-uart-ota.md

firmware: no-reflash config updates for ESP-01S + UART-OTA groundwork

2026-06-04 19:11:34 -04:00