remote-rig

The project was designed around a 10.60.1.0/24 travel-router network,
but the actual RemoteRig router uses 192.168.8.0/24 (the C6 associates
and gets 192.168.8.x; hub confirmed at 192.168.8.56). Replace the
network prefix everywhere (last octet preserved; GoPro 10.5.5.1 left
alone).

- scripts/setup-pi.sh: static IP 192.168.8.56/24, gateway 192.168.8.1,
  deploy/health command examples updated
- esp32-mqtt-bridge.cpp: default mqtt_broker -> 192.168.8.56
- firmware/data/config.json: broker -> 192.168.8.56 (wifi_password kept
  blank in git; real value flashed to the device only)
- docs (CONTEXT, MQTT_CONTRACT, READMEs, wireframes): gateway/hub/DHCP
  and example IPs re-addressed for consistency

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

2026-06-05 07:47:57 -04:00

config.json

net: re-address hub network 10.60.1.0/24 -> 192.168.8.0/24

2026-06-05 07:47:57 -04:00

esp8266-config.json

feat: dual-board architecture — ESP8266 camera bridge + ESP32 MQTT bridge

2026-05-22 00:49:06 +00:00