substitutions:
  device_name: polly-a1-mini-camera
  friendly_name: "Polly's A1 Camera"
  
esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}

esp32:
  board: esp32dev
  framework:
    type: esp-idf
#  minimum_chip_revision: 3.1

# Enable logging
logger:
  level: INFO

# Enable Home Assistant API
api:
  encryption:
    key: "iLF5QCgTVCwgaA5vjTGez03Dfjvns8JvkcwmUN4NXR8="

ota:
  - platform: esphome
    password: "58f86a5e60abe60886cec2f65a1d3da5"

wifi:
  ssid: !secret wifi_iot_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${friendly_name} Fallback"
    password: !secret wifi_password

captive_portal:

# Web server for standalone control (optional, but useful)
web_server:
  port: 80

i2c:
  - id: camera_i2c
    sda: GPIO26
    scl: GPIO27

psram:
  mode: quad
  speed: 80MHz

esp32_camera:
  external_clock:
    pin: GPIO0
    frequency: 20MHz
  i2c_id: camera_i2c
  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
  vsync_pin: GPIO25
  href_pin: GPIO23
  pixel_clock_pin: GPIO22
  power_down_pin: GPIO32
  resolution: 1024X768
  jpeg_quality: 20
  vertical_flip: False
  horizontal_mirror: True
  max_framerate: 20 fps
  idle_framerate: 0.05 fps

  # Image settings
  name: ${device_name}
  # brightness: 1
  # contrast: 0
  # agc_gain_ceiling: 2X
  # agc_mode: MANUAL
  # agc_value: 5
  # ...

esp32_camera_web_server:
  - port: 8080
    mode: STREAM
  - port: 8081
    mode: SNAPSHOT

switch:
  - platform: gpio
    name: "${device_name}-flash"
    pin: 4