RemoteRig Central Hub

A central hub for managing remote camera rigs, designed for Raspberry Pi Zero 2 W.

Overview

RemoteRig Central Hub is the control plane for remote camera setups. It connects to camera rigs over MQTT, stores configuration and state in SQLite, and exposes a management API — all from a lightweight Go binary optimized for resource-constrained devices like the Raspberry Pi Zero 2 W.

Tech Stack

Component	Technology
Language	Go 1.24+
Database	SQLite
Messaging	MQTT
Configuration	YAML (gopkg.in/yaml.v3)
Target Platform	Raspberry Pi Zero 2 W (ARMv6)

Project Structure

remote-rig/
├── cmd/
│   └── server/
│       └── main.go         # Application entry point
├── internal/
│   └── db/
│       └── db.go           # SQLite database initialization and schema
├── config.yaml             # Application configuration
├── go.mod                  # Go module definition
├── go.sum                  # Dependency checksums
└── README.md

Prerequisites

• Go 1.24+ — Download and install
• MQTT Broker — e.g., Mosquitto (default: localhost:1883)
• Raspberry Pi Zero 2 W (or any Linux system — macOS and Windows also work for development)
• Git — for cloning the repository

Setup

1. Clone the Repository

git clone https://code.cubecraftcreations.com/CubeCraft-Creations/remote-rig.git
cd remote-rig

2. Install Go Dependencies

go mod download

3. Configure

Edit config.yaml to match your environment:

# Database file path (SQLite)
db_path: "remoterig.db"

# API key for endpoint authentication — CHANGE THIS
api_key: "your-secure-api-key-here"

# HTTP server settings
port: 8080
read_timeout: 5s
write_timeout: 10s
idle_timeout: 120s

# MQTT broker connection
mqtt:
  broker: "localhost:1883"
  client_id: "remoterig-hub"

# Target platform
platform:
  type: "pi-zero-2w"
  max_cameras: 16

Key settings to review:

Setting	Description	Default
api_key	API key for authenticating requests	changeme (must change)
port	HTTP server listen port	8080
mqtt.broker	MQTT broker address	localhost:1883
mqtt.client_id	MQTT client identifier	remoterig-hub
platform.type	Target platform identifier	pi-zero-2w
platform.max_cameras	Maximum number of camera rigs	16
db_path	SQLite database file path	remoterig.db
read_timeout	HTTP read timeout	5s
write_timeout	HTTP write timeout	10s
idle_timeout	HTTP idle connection timeout	120s

Running Locally

Start the hub with:

go run ./cmd/server/

You should see output similar to:

RemoteRig hub starting...
Database: remoterig.db
API key set: true
Server port: 8080
MQTT broker: localhost:1883
Platform: pi-zero-2w (max 16 cameras)
RemoteRig hub ready

Deployment (CI/CD — pull-based)

Deploys are automated and pull-based, so nothing has to reach into the closed RemoteRig network:

1. Push to dev → Gitea Actions (.gitea/workflows/build-dev.yaml) builds the React frontend and cross-compiles the Go hub for arm64.
2. The workflow publishes the binary + sha256 + version.txt to a rolling dev release.
3. On the Pi, remoterig-update.timer runs scripts/pi-update.sh every few minutes: it compares versions, downloads + verifies the checksum, and installs via scripts/deploy.sh (backup → restart → rollback on failure).

First-time Pi setup (sudo scripts/setup-pi.sh) installs Mosquitto, the remoterig service, and the updater timer. If the repo is private, set a read token in /opt/remoterig/update.env.

Manual / local cross-compile

The Pi Zero 2 W is a Cortex-A53 (ARMv8) running 64-bit Raspberry Pi OS, so the target is arm64:

GOOS=linux GOARCH=arm64 go build -o remoterig-hub ./cmd/server/
scp remoterig-hub config.yaml pi@192.168.8.56:/opt/remoterig/

Build Matrix

Target	Command
Raspberry Pi Zero 2 W (64-bit OS)	GOOS=linux GOARCH=arm64 go build -o remoterig-hub ./cmd/server/
Raspberry Pi (32-bit OS)	GOOS=linux GOARCH=arm GOARM=7 go build -o remoterig-hub ./cmd/server/
Local (same arch)	go build -o remoterig-hub ./cmd/server/
Linux amd64	GOOS=linux GOARCH=amd64 go build -o remoterig-hub ./cmd/server/

Running Tests

go test ./...

License

Proprietary — CubeCraft Creations.