Update display initialization comments for clarity and accuracy

Fix display orientation settings for correct portrait mode
2026-03-07 08:40:16 -05:00 · 2026-03-07 08:34:06 -05:00 · 2026-03-07 08:17:59 -05:00 · 2026-03-07 08:02:00 -05:00 · 2026-03-06 21:38:41 -05:00 · 2026-03-06 21:34:11 -05:00
13 changed files with 1691 additions and 1072 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -30,11 +30,14 @@

 # Whitelist specific folders (uncomment as needed)
 !automations/
-!packages/
+!packages/**
+!packages/**
+!packages/chore-tracker-ha.yaml
 !scenes/
 !scripts/
 !blueprints/
 !esphome/
+!esphome/fonts/**
 !esphome/ha-remote/
 !esphome/ha-remote/components/
 !esphome/ha-remote/components/**
@@ -47,7 +50,6 @@
 !esphome/chore-tracker/
 !esphome/chore-tracker/**
 !esphome/chore-tracker-esphome.yaml
-!chore-tracker-ha.yaml
 # !packages/
 # !themes/
 # !node-red/
--- a/esphome/.gitignore
+++ b/esphome/.gitignore
@@ -0,0 +1,5 @@
+# Gitignore settings for ESPHome
+# This is an example and may include too much for your use-case.
+# You can modify this file to suit your needs.
+/.esphome/
+/secrets.yaml
--- a/esphome/cat-medication-tracker.yaml
+++ b/esphome/cat-medication-tracker.yaml
@@ -0,0 +1,293 @@
+substitutions:
+  name: cat-medication-tracker
+  friendly_name: "Cat Medication Tracker"
+
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  includes:
+    - spi_helper.h
+  on_boot:
+    - priority: 100
+      then:
+        - light.turn_on: backlight
+    - priority: -100
+      then:
+        - lambda: |-
+            // MADCTL 0x48: MY=0, MX=1, BGR=1 — correct portrait, no mirror for ESP32-2432S035R
+            // ESP-IDF SPI master API used to bypass ESPHome's buffered display layer
+            spi_device_handle_t disp_fix;
+            spi_device_interface_config_t cfg = {};
+            cfg.clock_speed_hz = 1000000;
+            cfg.mode = 0;
+            cfg.spics_io_num = -1;  // manual CS
+            cfg.queue_size = 1;
+            if (spi_bus_add_device(SPI2_HOST, &cfg, &disp_fix) == ESP_OK) {
+                gpio_set_level((gpio_num_t)15, 0);  // CS low
+                gpio_set_level((gpio_num_t)2, 0);   // DC = command
+                spi_transaction_t t = {};
+                t.length = 8;
+                t.flags = SPI_TRANS_USE_TXDATA;
+                t.tx_data[0] = 0x36;  // MADCTL register
+                spi_device_polling_transmit(disp_fix, &t);
+                gpio_set_level((gpio_num_t)2, 1);   // DC = data
+                t.tx_data[0] = 0x48;  // MY=0, MX=1, BGR=1
+                spi_device_polling_transmit(disp_fix, &t);
+                gpio_set_level((gpio_num_t)15, 1);  // CS high
+                spi_bus_remove_device(disp_fix);
+            }
+        - component.update: my_display
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+logger:
+  level: DEBUG
+  logs:
+    xpt2046: WARN
+
+api:
+  encryption:
+    key: !secret api_encryption_key
+
+ota:
+  platform: esphome
+  password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_iot_ssid
+  password: !secret wifi_password
+  ap:
+    ssid: "${name}-fallback"
+    password: !secret fallback_password
+
+captive_portal:
+
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+    on_time:
+      - seconds: 0
+        minutes: 0
+        hours: 0
+        then:
+          - switch.turn_off: penelope_medicated
+          - switch.turn_off: tess_medicated
+          - script.execute: update_display
+
+spi:
+  - id: tft_spi
+    clk_pin: GPIO14
+    mosi_pin: GPIO13
+    miso_pin: GPIO12
+
+display:
+  - platform: mipi_spi
+    model: ILI9488
+    spi_id: tft_spi
+    cs_pin: GPIO15
+    dc_pin: GPIO2
+    reset_pin: GPIO4
+    rotation: 0
+    invert_colors: false
+    color_order: bgr
+    data_rate: 10MHz
+    dimensions:
+      width: 320
+      height: 480
+    id: my_display
+    auto_clear_enabled: false
+    update_interval: 2s
+    color_depth: 16
+    buffer_size: 25%
+    lambda: |-
+      // Colors
+      auto red = Color(255, 0, 0);
+      auto green = Color(0, 200, 0);
+      auto light_grey = Color(200, 200, 200);
+      auto white = Color(255, 255, 255);
+      auto black = Color(0, 0, 0);
+      auto dark_grey = Color(80, 80, 80);
+
+      // Fill background
+      it.fill(light_grey);
+
+      // Border: green if all done, red otherwise
+      bool all_done = id(penelope_medicated).state && id(tess_medicated).state;
+      auto border_color = all_done ? green : red;
+
+      int border = 10;
+      it.filled_rectangle(0, 0, 320, border, border_color);
+      it.filled_rectangle(0, 480 - border, 320, border, border_color);
+      it.filled_rectangle(0, 0, border, 480, border_color);
+      it.filled_rectangle(320 - border, 0, border, 480, border_color);
+
+      // Title
+      it.printf(160, 30, id(title_font), black, TextAlign::TOP_CENTER, "Cat Meds");
+
+      // Penelope button
+      int btn_x = 40;
+      int btn_y = 90;
+      int btn_w = 240;
+      int btn_h = 120;
+
+      auto penelope_color = id(penelope_medicated).state ? green : red;
+      it.filled_rectangle(btn_x, btn_y, btn_w, btn_h, penelope_color);
+      it.rectangle(btn_x, btn_y, btn_w, btn_h, dark_grey);
+      it.printf(btn_x + btn_w/2, btn_y + btn_h/2, id(button_font), white, TextAlign::CENTER, "Penelope");
+      if (id(penelope_medicated).state) {
+        it.printf(btn_x + btn_w/2, btn_y + btn_h - 20, id(status_font), white, TextAlign::CENTER, "DONE");
+      }
+
+      // Tess button
+      btn_y = 230;
+      auto tess_color = id(tess_medicated).state ? green : red;
+      it.filled_rectangle(btn_x, btn_y, btn_w, btn_h, tess_color);
+      it.rectangle(btn_x, btn_y, btn_w, btn_h, dark_grey);
+      it.printf(btn_x + btn_w/2, btn_y + btn_h/2, id(button_font), white, TextAlign::CENTER, "Tess");
+      if (id(tess_medicated).state) {
+        it.printf(btn_x + btn_w/2, btn_y + btn_h - 20, id(status_font), white, TextAlign::CENTER, "DONE");
+      }
+
+      // Reset button
+      int reset_x = 110;
+      int reset_y = 395;
+      int reset_w = 100;
+      int reset_h = 55;
+      it.filled_rectangle(reset_x, reset_y, reset_w, reset_h, dark_grey);
+      it.rectangle(reset_x, reset_y, reset_w, reset_h, black);
+      it.printf(reset_x + reset_w/2, reset_y + reset_h/2, id(status_font), white, TextAlign::CENTER, "RESET");
+
+# XPT2046 Touchscreen
+touchscreen:
+  - platform: xpt2046
+    id: my_touchscreen
+    spi_id: tft_spi
+    cs_pin: GPIO33
+    update_interval: 250ms
+    threshold: 1200
+    calibration:
+      x_min: 280
+      x_max: 3850
+      y_min: 340
+      y_max: 3860
+
+# Touch buttons as binary sensors
+binary_sensor:
+  - platform: touchscreen
+    touchscreen_id: my_touchscreen
+    name: "Penelope Button"
+    id: penelope_button
+    x_min: 40
+    x_max: 280
+    y_min: 90
+    y_max: 210
+    on_press:
+      then:
+        - switch.toggle: penelope_medicated
+
+  - platform: touchscreen
+    touchscreen_id: my_touchscreen
+    name: "Tess Button"
+    id: tess_button
+    x_min: 40
+    x_max: 280
+    y_min: 230
+    y_max: 350
+    on_press:
+      then:
+        - switch.toggle: tess_medicated
+
+  - platform: touchscreen
+    touchscreen_id: my_touchscreen
+    name: "Reset Button"
+    id: reset_button
+    x_min: 110
+    x_max: 210
+    y_min: 395
+    y_max: 450
+    on_press:
+      then:
+        - switch.turn_off: penelope_medicated
+        - switch.turn_off: tess_medicated
+
+  - platform: template
+    name: "Penelope Medication Status"
+    lambda: 'return id(penelope_medicated).state;'
+    device_class: running
+    
+  - platform: template
+    name: "Tess Medication Status"
+    lambda: 'return id(tess_medicated).state;'
+    device_class: running
+
+  - platform: template
+    name: "All Cats Medicated"
+    lambda: 'return id(penelope_medicated).state && id(tess_medicated).state;'
+    device_class: running
+
+# Backlight control
+output:
+  - platform: gpio
+    pin: GPIO27
+    id: backlight_pwm
+    inverted: false
+
+light:
+  - platform: binary
+    output: backlight_pwm
+    name: "${friendly_name} Backlight"
+    id: backlight
+    restore_mode: ALWAYS_ON
+
+# Medication state switches (exposed to Home Assistant)
+switch:
+  - platform: template
+    name: "Penelope Medicated"
+    id: penelope_medicated
+    optimistic: true
+    restore_mode: RESTORE_DEFAULT_OFF
+    on_turn_on:
+      - script.execute: update_display
+    on_turn_off:
+      - script.execute: update_display
+
+  - platform: template
+    name: "Tess Medicated"
+    id: tess_medicated
+    optimistic: true
+    restore_mode: RESTORE_DEFAULT_OFF
+    on_turn_on:
+      - script.execute: update_display
+    on_turn_off:
+      - script.execute: update_display
+
+  - platform: template
+    name: "Reset All Medications"
+    id: reset_all
+    optimistic: false
+    turn_on_action:
+      - switch.turn_off: penelope_medicated
+      - switch.turn_off: tess_medicated
+
+# Script to update display
+script:
+  - id: update_display
+    then:
+      - component.update: my_display
+
+# Fonts
+font:
+  - file: "gfonts://Roboto"
+    id: title_font
+    size: 28
+    
+  - file: "gfonts://Roboto"
+    id: button_font
+    size: 24
+    
+  - file: "gfonts://Roboto"
+    id: status_font
+    size: 14
--- a/esphome/chore-tracker-esphome.yaml
+++ b/esphome/chore-tracker-esphome.yaml
--- a/esphome/chore-tracker/chore-tracker-dashboard.yaml
+++ b/esphome/chore-tracker/chore-tracker-dashboard.yaml
@@ -13,30 +13,30 @@ views:
        cards:
          - type: markdown
            content: >
-              ### 😺 Jordyn
+              ### 󰄛 Jordyn
              {{
-                '✅ All done!' if states('sensor.jordyn_all_chores_done') == 'True'
-                else states('sensor.jordyn_chores_done_today') ~ '/5 chores done'
+                'All done!' if states('sensor.jordyn_all_chores_done') == 'True'
+                else states('sensor.jordyn_chores_done_today') ~ '/4 chores done'
              }}

          - type: markdown
            content: >
-              ### 🤓 Declan
+              ### 󱑷 Declan
              {{
-                '✅ All done!' if states('sensor.declan_all_chores_done') == 'True'
-                else states('sensor.declan_chores_done_today') ~ '/4 chores done'
+                'All done!' if states('sensor.declan_all_chores_done') == 'True'
+                else states('sensor.declan_chores_done_today') ~ '/2 chores done'
              }}

          - type: markdown
            content: >
-              ### 🌝 Chloe
+              ### 󱚣 Chloe
              {{
-                '✅ All done!' if states('sensor.chloe_all_chores_done') == 'True'
-                else states('sensor.chloe_chores_done_today') ~ '/6 chores done'
+                'All done!' if states('sensor.chloe_all_chores_done') == 'True'
+                else states('sensor.chloe_chores_done_today') ~ '/3 chores done'
              }}

      - type: button
-        name: "↺ Reset ALL Chores"
+        name: "Reset ALL Chores"
        icon: mdi:restart-alert
        tap_action:
          action: call-service
@@ -44,87 +44,69 @@ views:
          target:
            entity_id: input_button.reset_all_chores
      - type: entities
-        title: "😺 Jordyn's Chores"
+        title: "󰄛 Jordyn's Chores"
        entities:
-          - entity: switch.chore_tracker_jordyn_make_bed
-            name: "🛏️ Make Bed"
+          - entity: switch.chore_tracker_jordyn_put_on_underwear
+            name: "󰋣 Put on underwear"

          - entity: switch.chore_tracker_jordyn_brush_teeth
-            name: "🦷 Brush Teeth"
+            name: "󰦩 Brush Teeth"

-          - entity: switch.chore_tracker_jordyn_tidy_room
-            name: "🧹 Tidy Room"
+          - entity: switch.chore_tracker_jordyn_fill_water_bowls
+            name: "󰆫 Fill water bowls"

-          - entity: switch.chore_tracker_jordyn_homework
-            name: "📚 Homework"
-
-          - entity: switch.chore_tracker_jordyn_feed_dog
-            name: "🐾 Feed Dog"
+          - entity: switch.chore_tracker_jordyn_restock_cat_food_cans
+            name: "󱜜 Restock Cat Food Cans"
          - type: divider
          - entity: sensor.jordyn_chores_done_today
            name: "Chores done today"
          - entity: sensor.jordyn_all_chores_done
-            name: "✅ All Done?"
+            name: "All Done?"
          - type: button
-            name: "↺ Reset Jordyn's Chores"
+            name: "Reset Jordyn's Chores"
            tap_action:
              action: call-service
              service: input_button.press
              target:
                entity_id: input_button.jordyn_reset_chores
      - type: entities
-        title: "🤓 Declan's Chores"
+        title: "󱑷 Declan's Chores"
        entities:
-          - entity: switch.chore_tracker_declan_make_bed
-            name: "🛏️ Make Bed"
+          - entity: switch.chore_tracker_declan_take_morning_pill
+            name: "󰐂 Take morning pill"

-          - entity: switch.chore_tracker_declan_brush_teeth
-            name: "🦷 Brush Teeth"
-
-          - entity: switch.chore_tracker_declan_set_table
-            name: "🍽️ Set Table"
-
-          - entity: switch.chore_tracker_declan_take_out_trash
-            name: "🗑️ Take Out Trash"
+          - entity: switch.chore_tracker_declan_scoop_dog_poop
+            name: "󰇷 Scoop Dog Poop"
          - type: divider
          - entity: sensor.declan_chores_done_today
            name: "Chores done today"
          - entity: sensor.declan_all_chores_done
-            name: "✅ All Done?"
+            name: "All Done?"
          - type: button
-            name: "↺ Reset Declan's Chores"
+            name: "Reset Declan's Chores"
            tap_action:
              action: call-service
              service: input_button.press
              target:
                entity_id: input_button.declan_reset_chores
      - type: entities
-        title: "🌝 Chloe's Chores"
+        title: "󱚣 Chloe's Chores"
        entities:
-          - entity: switch.chore_tracker_chloe_make_bed
-            name: "🛏️ Make Bed"
+          - entity: switch.chore_tracker_chloe_fill_kitty_feeders
+            name: "󰊩 Fill kitty feeders"

-          - entity: switch.chore_tracker_chloe_brush_teeth
-            name: "🦷 Brush Teeth"
+          - entity: switch.chore_tracker_chloe_scoop_kitty_litter
+            name: "󰇷 Scoop Kitty Litter"

-          - entity: switch.chore_tracker_chloe_water_plants
-            name: "🌱 Water Plants"
-
-          - entity: switch.chore_tracker_chloe_homework
-            name: "📚 Homework"
-
-          - entity: switch.chore_tracker_chloe_tidy_room
-            name: "🧹 Tidy Room"
-
-          - entity: switch.chore_tracker_chloe_practice_piano
-            name: "🎹 Practice Piano"
+          - entity: switch.chore_tracker_chloe_replace_kitty_litter_bags
+            name: "󰇷 Replace Kitty Litter Bags"
          - type: divider
          - entity: sensor.chloe_chores_done_today
            name: "Chores done today"
          - entity: sensor.chloe_all_chores_done
-            name: "✅ All Done?"
+            name: "All Done?"
          - type: button
-            name: "↺ Reset Chloe's Chores"
+            name: "Reset Chloe's Chores"
            tap_action:
              action: call-service
              service: input_button.press
--- a/esphome/chore-tracker/chores_config.yaml
+++ b/esphome/chore-tracker/chores_config.yaml
@@ -3,12 +3,30 @@
 #
 # Edit this file to change kids, chores, and settings.
 # Then run: python3 generate.py
+#
+# ICONS: Use MDI codepoints from https://pictogrammers.com/library/mdi/
+# Format: "\U000FXXXX"  e.g. mdi:bed = "\U000F02E3"
+# The kid avatar field also uses MDI codepoints.
+#
+# Common chore icons:
+#   Bed:          "\U000F02E3"   mdi:bed
+#   Brush teeth:  "\U000F09A9"   mdi:toothbrush
+#   Broom:        "\U000F00A8"   mdi:broom
+#   Book:         "\U000F0219"   mdi:book-open-variant
+#   Dog:          "\U000F01F9"   mdi:dog
+#   Paw:          "\U000F0265"   mdi:paw
+#   Silverware:   "\U000F03E7"   mdi:silverware-fork-knife
+#   Trash:        "\U000F05B8"   mdi:trash-can
+#   Watering can: "\U000F1B25"   mdi:watering-can
+#   Piano:        "\U000F0F9E"   mdi:piano
+#   Dumbbell:     "\U000F0F1E"   mdi:dumbbell
+#   Shower:       "\U000F0467"   mdi:shower
 ################################################################################

 settings:
  device_name: chore-tracker
  friendly_name: "Chore Tracker"
-  wifi_ssid: !secret wifi_iot_ssid
+  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password
  api_key: !secret api_encryption_key
  ota_password: !secret ota_password
@@ -17,54 +35,42 @@ settings:
  notify_service: notify.notify

 # ── KIDS ──────────────────────────────────────────────────────────────────────
-# Each kid has their own chore list.
-# name, avatar, color, color_dark, and chores are all required.
+# avatar: MDI codepoint shown in the sidebar on the kid's chore page
+# color / color_dark: hex colours for that kid's sidebar
 #
 kids:
  - name: Jordyn
-    avatar: "😺"
-    color: "4D96FF"
-    color_dark: "2A6FCC"
+    avatar: "\U000F011B"       # mdi:cat
+    color: "5F5980" # #5F5980 is a nice light blue, but it's a bit hard to read when used as a background colour for the sidebar. So I use a darker version of the same colour for the sidebar background.
+    color_dark: "2F3061" # #2F3061 is a darker version of #5F5980, and is easier to read when used as a background colour for the sidebar.
    chores:
-      - name: Make Bed
-        icon: "🛏️"
+      - name: Put on underwear
+        icon: "\U000F02E3"     # mdi:bed
      - name: Brush Teeth
-        icon: "🦷"
-      - name: Tidy Room
-        icon: "🧹"
-      - name: Homework
-        icon: "📚"
-      - name: Feed Dog
-        icon: "🐾"
+        icon: "\U000F09A9"     # mdi:toothbrush
+      - name: Fill water bowls
+        icon: "\U000F01AB"     # mdi:cup-water
+      - name: Restock Cat Food Cans
+        icon: "\U000F171C"     # mdi:food-turkey

  - name: Declan
-    avatar: "🤓"
-    color: "C77DFF"
-    color_dark: "8B42CC"
+    avatar: "\U000F1477"       # mdi:wizard-hat
+    color: "720026" # #720026 is a deep red, used for the kid's sidebar background.
+    color_dark: "4F000B" # #4F000B is a darker version of #720026, easier to read when used as a background colour for the sidebar.
    chores:
-      - name: Make Bed
-        icon: "🛏️"
-      - name: Brush Teeth
-        icon: "🦷"
-      - name: Set Table
-        icon: "🍽️"
-      - name: Take Out Trash
-        icon: "🗑️"
+      - name: Take morning pill
+        icon: "\U000F0402"     # mdi:pill
+      - name: Scoop Dog Poop
+        icon: "\U000F01F7"     # mdi:emoticon-poop

  - name: Chloe
-    avatar: "🌝"
-    color: "FF6B9D"
-    color_dark: "CC3A6F"
+    avatar: "\U000F16A3"       # mdi:robot-excited
+    color: "73683B" # #73683B is a light brown, used for the kid's sidebar background.
+    color_dark: "583E23" # #583E23 is a darker version of #73683B, easier to read when used as a background colour for the sidebar.
    chores:
-      - name: Make Bed
-        icon: "🛏️"
-      - name: Brush Teeth
-        icon: "🦷"
-      - name: Water Plants
-        icon: "🌱"
-      - name: Homework
-        icon: "📚"
-      - name: Tidy Room
-        icon: "🧹"
-      - name: Practice Piano
-        icon: "🎹"
+      - name: Fill kitty feeders
+        icon: "\U000F02A9"     # mdi:bowl-outline
+      - name: Scoop Kitty Litter
+        icon: "\U000F01F7"     # mdi:emoticon-poop
+      - name: Replace Kitty Litter Bags
+        icon: "\U000F01F7"     # mdi:emoticon-poop
--- a/esphome/chore-tracker/generate.py
+++ b/esphome/chore-tracker/generate.py
@@ -7,12 +7,14 @@ Reads chores_config.yaml and generates:
  • chore-tracker-ha.yaml        (Home Assistant config)
  • chore-tracker-dashboard.yaml (Lovelace dashboard)

+Target hardware: Waveshare ESP32-S3-Touch-LCD-7 (800x480)
+
 Home screen behaviour:
  - Each kid's button has a RED outline while any chores remain undone
  - Button turns SOLID GREEN when ALL chores are complete
  - Resets to red automatically at midnight

-No star tracking — chores are simply done or not done.
+Each kid must define their own chores list in chores_config.yaml.

 Usage:
  python3 generate.py
@@ -35,6 +37,10 @@ except ImportError:
 # Helpers
 # ─────────────────────────────────────────────────────────────────────────────

+# Screen padding — space kept clear around all edges (pixels)
+PAD = 12
+
+
 def slug(name: str) -> str:
    return name.lower().replace(" ", "_").replace("-", "_")

@@ -47,9 +53,15 @@ def eid(kid: dict, chore: dict) -> str:
 def ha_switch(kid: dict, chore: dict) -> str:
    return f"switch.chore_tracker_{eid(kid, chore)}"

+# mdi:checkbox-marked-circle-outline — safe default if icon is omitted
+DEFAULT_ICON = "\U000F0133"
+
 def get_chores(kid: dict) -> list:
-    """Each kid must define their own chore list."""
-    return kid["chores"]
+    chores = kid["chores"]
+    for c in chores:
+        if "icon" not in c:
+            c["icon"] = DEFAULT_ICON
+    return chores


 # ─────────────────────────────────────────────────────────────────────────────
@@ -60,12 +72,12 @@ def gen_esphome(cfg: dict) -> str:
    s    = cfg["settings"]
    kids = cfg["kids"]

-    # ── Switches ──────────────────────────────────────────────────────────────
+    # ── Switches (one per chore per kid) ──────────────────────────────────────
    switch_blocks = []
    for kid in kids:
        chores = get_chores(kid)
        ks = kid_slug(kid)
-        switch_blocks.append(f"\n  # ── {kid['name']}'s chores ──────────────────────────")
+        switch_blocks.append(f"\n  # ── {kid['name']}'s chores ──────────────────────────\n")
        for chore in chores:
            e = eid(kid, chore)
            switch_blocks.append(f"""\
@@ -91,7 +103,7 @@ def gen_esphome(cfg: dict) -> str:
              entity_id: switch.chore_tracker_{e}
 """)

-    # ── Sensors (chores-done count only) ──────────────────────────────────────
+    # ── Sensors (chores-done count only — no stars) ────────────────────────
    sensor_blocks = []
    for kid in kids:
        chores = get_chores(kid)
@@ -112,7 +124,7 @@ def gen_esphome(cfg: dict) -> str:

 """)

-    # ── Midnight reset ────────────────────────────────────────────────────────
+    # ── Midnight reset calls ──────────────────────────────────────────────────
    reset_calls = "\n".join(
        f"              id(reset_{kid_slug(k)}_chores).execute();"
        for k in kids
@@ -121,6 +133,13 @@ def gen_esphome(cfg: dict) -> str:
    lvgl_pages = _gen_lvgl_pages(kids)
    scripts    = _gen_scripts(kids)

+    # Collect all unique MDI glyphs used (avatars + chore icons)
+    all_glyphs = sorted(set(
+        [k["avatar"] for k in kids] +
+        [c["icon"] for k in kids for c in get_chores(k)]
+    ))
+    glyphs_str = "".join(all_glyphs)
+
    return f"""\
 ################################################################################
 # chore-tracker-esphome.yaml  (AUTO-GENERATED — edit chores_config.yaml)
@@ -128,19 +147,30 @@ def gen_esphome(cfg: dict) -> str:
 #
 # HOME SCREEN BEHAVIOUR:
 #   Red outline  = chores incomplete
-#   Solid green  = all chores done  ✓
+#   Solid green  = all chores done
 #   Resets to red automatically at midnight
+#
+# Hardware: Waveshare ESP32-S3-Touch-LCD-7 (800x480)
 ################################################################################

 esphome:
  name: {s["device_name"]}
  friendly_name: "{s["friendly_name"]}"
+  on_boot:
+    priority: -10
+    then:
+      - light.turn_on: backlight
+      - lvgl.page.show: page_home

 esp32:
-  board: esp32s3box
+  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf

+psram:
+  mode: octal
+  speed: 80MHz
+
 wifi:
  ssid: {s["wifi_ssid"]}
  password: {s["wifi_password"]}
@@ -160,54 +190,58 @@ ota:
  - platform: esphome
    password: {s["ota_password"]}

-# ── Display — Waveshare ESP32-S3 7" (adjust pins for your board revision) ─────
-display:
-  - platform: rpi_dpi_rgb
-    id: main_display
-    auto_clear_enabled: false
-    color_order: RGB
-    dimensions:
-      width: 800
-      height: 480
-    de_pin:
-      number: GPIO40
-      ignore_strapping_warning: true
-    hsync_pin:
-      number: GPIO39
-      ignore_strapping_warning: true
-    vsync_pin:
-      number: GPIO41
-    pclk_pin: GPIO42
-    data_pins:
-      red:   [GPIO45, GPIO48, GPIO47, GPIO21, GPIO14]
-      green: [GPIO5,  GPIO6,  GPIO7,  GPIO15, GPIO16, GPIO4]
-      blue:  [GPIO8,  GPIO3,  GPIO46, GPIO9,  GPIO1]
-
-touchscreen:
-  - platform: gt911
-    id: touch
-    display: main_display
-    i2c_id: i2c_touch
-    interrupt_pin: GPIO2
-    reset_pin: GPIO38
-
+# ── I2C ───────────────────────────────────────────────────────────────────────
 i2c:
-  - id: i2c_touch
-    sda: GPIO19
-    scl: GPIO20
-    frequency: 400kHz
+  sda: 8
+  scl: 9

+# ── CH422G IO Expander (controls LCD reset, touch reset, backlight) ───────────
+ch422g:
+  - id: ch422g_hub
+
+# ── Display ───────────────────────────────────────────────────────────────────
+display:
+  - platform: mipi_rgb
+    model: ESP32-S3-TOUCH-LCD-7-800X480
+    id: main_display
+    update_interval: never
+    auto_clear_enabled: false
+    reset_pin:
+      ch422g: ch422g_hub
+      number: 3
+      mode:
+        output: true
+
+# ── Touchscreen ───────────────────────────────────────────────────────────────
+touchscreen:
+  platform: gt911
+  id: touch
+  update_interval: 120ms
+  reset_pin:
+    ch422g: ch422g_hub
+    number: 1
+    mode:
+      output: true
+
+# ── Backlight ─────────────────────────────────────────────────────────────────
 output:
-  - platform: ledc
-    pin: GPIO17
-    id: backlight_output
+  - platform: template
+    id: lcd_backlight_out
+    type: binary
+    write_action:
+      - if:
+          condition:
+            lambda: return state;
+          then:
+            - switch.turn_on: lcd_backlight_raw
+          else:
+            - switch.turn_off: lcd_backlight_raw

 light:
-  - platform: monochromatic
-    output: backlight_output
+  - platform: binary
    name: "Display Backlight"
+    output: lcd_backlight_out
    id: backlight
-    restore_mode: ALWAYS_ON

 # ── Midnight reset ────────────────────────────────────────────────────────────
 time:
@@ -222,25 +256,46 @@ time:
 {reset_calls}
          - lvgl.page.show: page_home

-fonts:
-  - file: "gfonts://Nunito:wght@900"
+# ── Fonts (place files in /config/esphome/fonts/) ────────────────────────────
+font:
+  - file: "fonts/Nunito-Black.ttf"
    id: font_title
    size: 40
-  - file: "gfonts://Nunito:wght@800"
+  - file: "fonts/Nunito-ExtraBold.ttf"
    id: font_name
    size: 30
-  - file: "gfonts://Nunito:wght@700"
+  - file: "fonts/Nunito-Bold.ttf"
    id: font_med
    size: 22
-  - file: "gfonts://Nunito:wght@600"
+  - file: "fonts/Nunito-SemiBold.ttf"
    id: font_small
    size: 17
-  - file: "gfonts://Nunito:wght@600"
+  - file: "fonts/Nunito-SemiBold.ttf"
    id: font_tiny
    size: 13
+  # MDI icon font — used for chore icons and kid avatars
+  - file: "fonts/materialdesignicons-webfont.ttf"
+    id: font_mdi_large
+    size: 48
+    bpp: 4
+    glyphs: {glyphs_str}
+  - file: "fonts/materialdesignicons-webfont.ttf"
+    id: font_mdi_small
+    size: 32
+    bpp: 4
+    glyphs: {glyphs_str}

-# ── Switches — one per chore per kid, synced to HA ───────────────────────────
+# ── Switches — backlight raw + one per chore per kid ─────────────────────────
 switch:
+  - platform: gpio
+    id: lcd_backlight_raw
+    name: "LCD Backlight Raw"
+    restore_mode: ALWAYS_ON
+    pin:
+      ch422g: ch422g_hub
+      number: 2
+      mode:
+        output: true
 {"".join(switch_blocks)}

 # ── Sensors — reported to HA ─────────────────────────────────────────────────
@@ -258,7 +313,7 @@ lvgl:
  touchscreens:
    - touch
  theme:
-    btn:
+    button:
      radius: 20
      border_width: 0
  pages:
@@ -275,10 +330,11 @@ def _gen_lvgl_pages(kids: list) -> str:

    # ── HOME PAGE ─────────────────────────────────────────────────────────────
    n       = len(kids)
-    btn_w = min(200, max(140, (760 - 20 * (n - 1)) // n))
+    usable_w = 800 - PAD * 2
+    btn_w   = min(200, max(140, (usable_w - 40 - 20 * (n - 1)) // n))
    total_w = btn_w * n + 20 * (n - 1)
-    start_x = (800 - total_w) // 2
-    btn_y   = 130
+    start_x = PAD + (usable_w - total_w) // 2
+    btn_y   = PAD + 118
    btn_h   = 210

    reset_all_calls = "\n".join(
@@ -291,16 +347,15 @@ def _gen_lvgl_pages(kids: list) -> str:
        x  = start_x + i * (btn_w + 20)
        ks = kid_slug(kid)
        home_btns += f"""\
-        - btn:
+        - button:
            id: home_btn_{ks}
            x: {x}
            y: {btn_y}
            width: {btn_w}
            height: {btn_h}
-            bg_color: 0xFFFFFF
-            bg_opa: TRANSP
-            border_color: 0xFF4757
-            border_width: 5
+            bg_color: 0xFF4757
+            bg_opa: COVER
+            border_width: 0
            radius: 24
            on_click:
              then:
@@ -310,20 +365,20 @@ def _gen_lvgl_pages(kids: list) -> str:
                  align: CENTER
                  y: -45
                  text: "{kid['avatar']}"
-                  text_font: font_title
+                  text_font: font_mdi_large
              - label:
                  align: CENTER
                  y: 22
                  text: "{kid['name']}"
                  text_font: font_name
-                  text_color: 0x2D3436
+                  text_color: 0xFFFFFF
              - label:
                  id: home_status_{ks}
                  align: CENTER
                  y: 66
                  text: "not done"
                  text_font: font_tiny
-                  text_color: 0xFF4757
+                  text_color: 0xFFFFFF

 """

@@ -334,7 +389,7 @@ def _gen_lvgl_pages(kids: list) -> str:
        - label:
            x: 0
            y: 36
-            width: 800
+            width: {800 - PAD * 2}
            align: TOP_MID
            text: "Chore Tracker"
            text_font: font_title
@@ -342,14 +397,14 @@ def _gen_lvgl_pages(kids: list) -> str:
        - label:
            x: 0
            y: 90
-            width: 800
+            width: {800 - PAD * 2}
            align: TOP_MID
            text: "Tap a name to check off chores"
            text_font: font_small
            text_color: 0xB2BEC3
-        - btn:
+        - button:
            x: 640
-            y: 424
+            y: 428
            width: 148
            height: 40
            bg_color: 0xFF4757
@@ -360,7 +415,7 @@ def _gen_lvgl_pages(kids: list) -> str:
            widgets:
              - label:
                  align: CENTER
-                  text: "↺  Reset All"
+                  text: "Reset All"
                  text_color: 0xFFFFFF
                  text_font: font_tiny
 {home_btns}""")
@@ -375,21 +430,21 @@ def _gen_lvgl_pages(kids: list) -> str:
        rows      = (n_chores + cols - 1) // cols
        sidebar_w = 172
        gap       = 10
-        content_w = 800 - sidebar_w - gap * 2
+        content_w = 800 - sidebar_w - gap - 12  # right pad
        card_w    = (content_w - gap * (cols - 1)) // cols
-        card_h    = min(138, (480 - gap * (rows + 1)) // rows)
+        card_h    = min(138, (480 - PAD - gap * (rows + 1)) // rows)

        card_widgets = ""
        for idx, chore in enumerate(chores):
            row    = idx // cols
            col    = idx % cols
            x      = sidebar_w + gap + col * (card_w + gap)
-            y      = gap + row * (card_h + gap)
+            y      = 12 + row * (card_h + gap)
            e      = eid(kid, chore)
            icon_y  = -(card_h // 4)
            label_y =  card_h // 8
            card_widgets += f"""\
-        - btn:
+        - button:
            id: card_{e}
            x: {x}
            y: {y}
@@ -417,7 +472,8 @@ def _gen_lvgl_pages(kids: list) -> str:
                  align: CENTER
                  y: {icon_y}
                  text: "{chore['icon']}"
-                  text_font: font_med
+                  text_font: font_mdi_small
+                  text_color: 0x{kid['color']}
              - label:
                  align: CENTER
                  y: {label_y}
@@ -449,7 +505,7 @@ def _gen_lvgl_pages(kids: list) -> str:
                  width: {sidebar_w}
                  align: TOP_MID
                  text: "{kid['avatar']}"
-                  text_font: font_title
+                  text_font: font_mdi_large
              - label:
                  x: 0
                  y: 76
@@ -488,9 +544,9 @@ def _gen_lvgl_pages(kids: list) -> str:
                  text: ""
                  text_font: font_small
                  text_color: 0xFFFFFF
-              - btn:
+              - button:
                  x: 14
-                  y: 364
+                  y: {480 - PAD - 44 - 6 - 44}
                  width: {sidebar_w - 28}
                  height: 44
                  bg_color: 0xFF4757
@@ -501,12 +557,12 @@ def _gen_lvgl_pages(kids: list) -> str:
                  widgets:
                    - label:
                        align: CENTER
-                        text: "↺  Reset"
+                        text: "Reset"
                        text_color: 0xFFFFFF
                        text_font: font_small
-              - btn:
+              - button:
                  x: 14
-                  y: 420
+                  y: {480 - PAD - 44}
                  width: {sidebar_w - 28}
                  height: 44
                  bg_color: 0x{kid['color_dark']}
@@ -517,7 +573,7 @@ def _gen_lvgl_pages(kids: list) -> str:
                  widgets:
                    - label:
                        align: CENTER
-                        text: "◀  Home"
+                        text: "Home"
                        text_color: 0xFFFFFF
                        text_font: font_small

@@ -560,7 +616,6 @@ def _gen_scripts(kids: list) -> str:
            f"              id({eid(kid,c)}).turn_off();" for c in chores
        )

-        # Reset script
        blocks.append(f"""\
  - id: reset_{ks}_chores
    mode: single
@@ -571,7 +626,6 @@ def _gen_scripts(kids: list) -> str:

 """)

-        # UI update script
        blocks.append(f"""\
  - id: update_{ks}_ui
    mode: single
@@ -587,9 +641,9 @@ def _gen_scripts(kids: list) -> str:
          lv_label_set_text(id(progress_label_{ks}), buf);

          // All-done message in sidebar
-          lv_label_set_text(id(all_done_label_{ks}), done == total ? "\\U0001F389 All done!" : "");
+          lv_label_set_text(id(all_done_label_{ks}), done == total ? "All done!" : "");

-          // Home button colour
+          // Home button: RED outline = incomplete, SOLID GREEN = all done
          if (done == total) {{
            lv_obj_set_style_bg_opa(id(home_btn_{ks}), LV_OPA_COVER, LV_PART_MAIN);
            lv_obj_set_style_bg_color(id(home_btn_{ks}), lv_color_hex(0x6BCB77), LV_PART_MAIN);
@@ -597,9 +651,9 @@ def _gen_scripts(kids: list) -> str:
            lv_label_set_text(id(home_status_{ks}), "\\u2713 all done!");
            lv_obj_set_style_text_color(id(home_status_{ks}), lv_color_hex(0xFFFFFF), LV_PART_MAIN);
          }} else {{
-            lv_obj_set_style_bg_opa(id(home_btn_{ks}), LV_OPA_TRANSP, LV_PART_MAIN);
-            lv_obj_set_style_border_color(id(home_btn_{ks}), lv_color_hex(0xFF4757), LV_PART_MAIN);
-            lv_obj_set_style_border_width(id(home_btn_{ks}), 5, LV_PART_MAIN);
+            lv_obj_set_style_bg_opa(id(home_btn_{ks}), LV_OPA_COVER, LV_PART_MAIN);
+            lv_obj_set_style_bg_color(id(home_btn_{ks}), lv_color_hex(0xFF4757), LV_PART_MAIN);
+            lv_obj_set_style_border_width(id(home_btn_{ks}), 0, LV_PART_MAIN);
            snprintf(buf, sizeof(buf), "%d left", total - done);
            lv_label_set_text(id(home_status_{ks}), buf);
            lv_obj_set_style_text_color(id(home_status_{ks}), lv_color_hex(0xFF4757), LV_PART_MAIN);
@@ -643,7 +697,6 @@ def gen_ha(cfg: dict) -> str:

 """)

-    # input_button helpers
    input_buttons = "".join(f"""\
  {kid_slug(k)}_reset_chores:
    name: "Reset {k['name']}'s Chores"
@@ -655,10 +708,8 @@ def gen_ha(cfg: dict) -> str:
    icon: mdi:restart-alert
 """

-    # Automations
    auto_blocks = []

-    # Per-kid HA reset button
    for kid in kids:
        ks = kid_slug(kid)
        off_calls = "\n".join(
@@ -667,7 +718,7 @@ def gen_ha(cfg: dict) -> str:
        )
        auto_blocks.append(f"""\
  - id: {ks}_reset_from_ha
-    alias: "Chore Tracker — Reset {kid['name']}'s chores from HA"
+    alias: "Chore Tracker - Reset {kid['name']}'s chores from HA"
    trigger:
      - platform: state
        entity_id: input_button.{ks}_reset_chores
@@ -676,29 +727,27 @@ def gen_ha(cfg: dict) -> str:

 """)

-    # Reset All from HA
-    all_off_calls = "\n".join(
+    all_off = "\n".join(
        f"      - service: switch.turn_off\n        target:\n          entity_id: {ha_switch(kid, c)}"
        for kid in kids for c in get_chores(kid)
    )
    auto_blocks.append(f"""\
  - id: reset_all_from_ha
-    alias: "Chore Tracker — Reset ALL chores from HA"
+    alias: "Chore Tracker - Reset ALL chores from HA"
    trigger:
      - platform: state
        entity_id: input_button.reset_all_chores
    action:
-{all_off_calls}
+{all_off}

 """)

-    # All-done notification
    for kid in kids:
        ks = kid_slug(kid)
        n  = len(get_chores(kid))
        auto_blocks.append(f"""\
  - id: {ks}_all_done_notify
-    alias: "Chore Tracker — {kid['name']} all done!"
+    alias: "Chore Tracker - {kid['name']} all done!"
    trigger:
      - platform: state
        entity_id: sensor.{ks}_all_chores_done
@@ -706,12 +755,11 @@ def gen_ha(cfg: dict) -> str:
    action:
      - service: {s['notify_service']}
        data:
-          title: "🎉 {kid['name']} finished all chores!"
+          title: "{kid['name']} finished all chores!"
          message: "{kid['name']} completed all {n} chores today!"

 """)

-    # Evening reminder
    reminder_actions = "".join(f"""\
      - if:
          condition: template
@@ -719,7 +767,7 @@ def gen_ha(cfg: dict) -> str:
        then:
          - service: {s['notify_service']}
            data:
-              title: "📋 {k['name']} has unfinished chores"
+              title: "{k['name']} has unfinished chores"
              message: >
                {k['name']} has done
                {{{{ states('sensor.{kid_slug(k)}_chores_done_today') }}}}/{len(get_chores(k))} chores today.
@@ -727,7 +775,7 @@ def gen_ha(cfg: dict) -> str:

    auto_blocks.append(f"""\
  - id: chore_reminder_evening
-    alias: "Chore Tracker — Evening reminder"
+    alias: "Chore Tracker - Evening reminder"
    trigger:
      - platform: time
        at: "{s['reminder_time']}:00"
@@ -741,8 +789,8 @@ def gen_ha(cfg: dict) -> str:
 # Kids: {", ".join(k["name"] for k in kids)}
 #
 # BIDIRECTIONAL SYNC:
-#   Screen → HA:  Each switch calls homeassistant.service on toggle
-#   HA → Screen:  ESPHome native API handles this automatically
+#   Screen to HA:  Each switch calls homeassistant.service on toggle
+#   HA to Screen:  ESPHome native API handles this automatically
 ################################################################################

 input_button:
@@ -767,7 +815,7 @@ def gen_dashboard(cfg: dict) -> str:
            content: >
              ### {kid['avatar']} {kid['name']}
              {{{{
-                '✅ All done!' if states('sensor.{kid_slug(kid)}_all_chores_done') == 'True'
+                'All done!' if states('sensor.{kid_slug(kid)}_all_chores_done') == 'True'
                else states('sensor.{kid_slug(kid)}_chores_done_today') ~ '/{len(get_chores(kid))} chores done'
              }}}}
 """ for kid in kids)
@@ -789,9 +837,9 @@ def gen_dashboard(cfg: dict) -> str:
          - entity: sensor.{ks}_chores_done_today
            name: "Chores done today"
          - entity: sensor.{ks}_all_chores_done
-            name: "✅ All Done?"
+            name: "All Done?"
          - type: button
-            name: "↺ Reset {kid['name']}'s Chores"
+            name: "Reset {kid['name']}'s Chores"
            tap_action:
              action: call-service
              service: input_button.press
@@ -815,7 +863,7 @@ views:
        cards:
 {summary_cards}
      - type: button
-        name: "↺ Reset ALL Chores"
+        name: "Reset ALL Chores"
        icon: mdi:restart-alert
        tap_action:
          action: call-service
@@ -859,18 +907,24 @@ def main():
        print("❌  No kids defined in config!")
        sys.exit(1)

-    # Validate every kid has their own chore list
    errors = [k["name"] for k in kids if "chores" not in k or not k["chores"]]
    if errors:
        print(f"❌  These kids have no chores defined: {', '.join(errors)}")
        print("    Add a 'chores:' list under each kid in chores_config.yaml")
        sys.exit(1)

+    # Warn about missing icons (will use default, not crash)
+    for k in kids:
+        for c in k.get("chores", []):
+            if "icon" not in c:
+                print(f"⚠️   {k['name']} / '{c['name']}' has no icon — using default")
+
    total_chores = sum(len(get_chores(k)) for k in kids)
    print(f"✅  Config loaded: {len(kids)} kid(s), {total_chores} total chores")
    for k in kids:
        chores = get_chores(k)
-        print(f"    {k['avatar']}  {k['name']}: {len(chores)} chores — {', '.join(c['name'] for c in chores)}")
+        print(f"    {k['avatar']}  {k['name']}: {len(chores)} chores"
+              f" — {', '.join(c['name'] for c in chores)}")
    print()

    files = {
@@ -886,9 +940,9 @@ def main():

    print()
    print("✅  Done!")
-    print("   1.  Flash chore-tracker-esphome.yaml  →  ESPHome dashboard")
-    print("   2.  Merge chore-tracker-ha.yaml       →  HA config + restart HA")
-    print("   3.  Paste chore-tracker-dashboard.yaml →  New HA dashboard")
+    print("   1.  Flash chore-tracker-esphome.yaml  ->  ESPHome dashboard")
+    print("   2.  Merge chore-tracker-ha.yaml        ->  HA config + restart HA")
+    print("   3.  Paste chore-tracker-dashboard.yaml ->  New HA dashboard")


 if __name__ == "__main__":
--- a/esphome/fdm-exhaust-fan-control.yaml
+++ b/esphome/fdm-exhaust-fan-control.yaml
@@ -35,22 +35,45 @@ captive_portal:
 web_server:
  port: 80

+# GPIO Outputs for fan control
+# IMPORTANT: inverted: true because NPN transistor driver inverts the logic
+#   GPIO HIGH -> NPN ON -> Gate LOW -> Fan OFF
+#   GPIO LOW  -> NPN OFF -> Gate HIGH (5V via pull-up) -> Fan ON
 output:
  - platform: gpio
    pin:
-      number: GPIO3
-      inverted: true  # Fix for driver inversion
+      number: GPIO3  # D1 on XIAO
+      inverted: true
    id: fan_80mm_output
+
  - platform: gpio
    pin:
-      number: GPIO4
+      number: GPIO4  # D2 on XIAO
      inverted: true
    id: fan_120mm_output

+# Fan entities for Home Assistant
 fan:
  - platform: binary
    name: "80mm Exhaust Fan"
+    id: fan_80mm
    output: fan_80mm_output
+
  - platform: binary
    name: "120mm Exhaust Fan"
+    id: fan_120mm
    output: fan_120mm_output
+
+# Optional: Add a switch to control both fans together
+switch:
+  - platform: template
+    name: "All Fans"
+    id: all_fans
+    turn_on_action:
+      - fan.turn_on: fan_80mm
+      - fan.turn_on: fan_120mm
+    turn_off_action:
+      - fan.turn_off: fan_80mm
+      - fan.turn_off: fan_120mm
+    lambda: |-
+      return id(fan_80mm).state && id(fan_120mm).state;
--- a/esphome/litter-box-cam.yaml
+++ b/esphome/litter-box-cam.yaml
@@ -0,0 +1,335 @@
+# =============================================================================
+# LITTER BOX MONITOR - DFRobot ESP32-S3 AI Camera
+# =============================================================================
+
+substitutions:
+  device_name: litter-box-cam
+  friendly_name: "Litter Box Camera"
+
+# -----------------------------------------------------------------------------
+# Core Device Configuration
+# -----------------------------------------------------------------------------
+esphome:
+  name: ${device_name}
+  friendly_name: ${friendly_name}
+  platformio_options:
+    build_flags: "-DBOARD_HAS_PSRAM"
+    board_build.arduino.memory_type: qio_opi
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:
+    type: arduino
+    version: latest
+  flash_size: 16MB
+
+# -----------------------------------------------------------------------------
+# PSRAM Configuration (Critical for camera)
+# -----------------------------------------------------------------------------
+psram:
+  mode: octal
+  speed: 80MHz
+
+# -----------------------------------------------------------------------------
+# Logging & API
+# -----------------------------------------------------------------------------
+logger:
+  level: INFO
+
+api:
+  encryption:
+    key: !secret api_encryption_key
+  
+  services:
+    - service: capture_and_analyze
+      then:
+        - script.execute: capture_image_script
+    
+    - service: update_status
+      variables:
+        needs_scooping: bool
+        litter_level_low: bool
+        cat_present: bool
+        cleanliness_score: int
+      then:
+        - lambda: |-
+            id(needs_scooping_sensor).publish_state(needs_scooping);
+            id(litter_level_low_sensor).publish_state(litter_level_low);
+            id(cat_present_sensor).publish_state(cat_present);
+            id(cleanliness_score_sensor).publish_state(cleanliness_score);
+            id(last_analysis_time).publish_state(id(homeassistant_time).now().timestamp);
+            if (cat_present) {
+              id(daily_cat_visits) += 1;
+              id(cat_visits_sensor).publish_state(id(daily_cat_visits));
+            }
+
+ota:
+  - platform: esphome
+    password: !secret ota_password
+
+# -----------------------------------------------------------------------------
+# WiFi Configuration
+# -----------------------------------------------------------------------------
+wifi:
+  ssid: !secret wifi_iot_ssid
+  password: !secret wifi_password
+  
+  ap:
+    ssid: "${device_name}-AP"
+    password: !secret wifi_password
+
+captive_portal:
+
+# -----------------------------------------------------------------------------
+# MQTT Configuration
+# -----------------------------------------------------------------------------
+mqtt:
+  id: mqtt_client
+  broker: !secret mqtt_broker
+  username: !secret mqtt_username
+  password: !secret mqtt_password
+  topic_prefix: litter_box
+
+# -----------------------------------------------------------------------------
+# Time Synchronization
+# -----------------------------------------------------------------------------
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+    on_time:
+      - seconds: 0
+        minutes: 0
+        hours: 0
+        then:
+          - lambda: |-
+              id(daily_cat_visits) = 0;
+              id(cat_visits_sensor).publish_state(0);
+
+# -----------------------------------------------------------------------------
+# Global Variables
+# -----------------------------------------------------------------------------
+globals:
+  - id: daily_cat_visits
+    type: int
+    restore_value: yes
+    initial_value: '0'
+
+  - id: motion_cooldown_active
+    type: bool
+    initial_value: 'false'
+
+  - id: publish_next_image
+    type: bool
+    initial_value: 'false'
+
+# -----------------------------------------------------------------------------
+# Camera Configuration (OV3660 - DFR1154 Specific)
+# -----------------------------------------------------------------------------
+esp32_camera:
+  id: litter_cam
+  name: "Litter Box Camera"
+  
+  # Hardware Interface - DFR1154 Pinout
+  external_clock:
+    pin: GPIO5
+    frequency: 20MHz
+  i2c_pins:
+    sda: GPIO8
+    scl: GPIO9
+  data_pins: [GPIO16, GPIO18, GPIO21, GPIO17, GPIO14, GPIO7, GPIO6, GPIO4]
+  vsync_pin: GPIO1
+  href_pin: GPIO2
+  pixel_clock_pin: GPIO15
+  
+  # Image Parameters
+  max_framerate: 10 fps
+  idle_framerate: 0.1 fps
+  resolution: 800x600
+  jpeg_quality: 10
+  vertical_flip: true
+  horizontal_mirror: false
+  aec_mode: AUTO
+  agc_mode: AUTO
+  wb_mode: AUTO
+  brightness: 0
+  contrast: 1
+  saturation: 0
+  on_image:
+    then:
+      - lambda: |-
+          if (!id(publish_next_image)) return;
+          id(publish_next_image) = false;
+
+          const uint8_t *data = x->get_data();
+          size_t len = x->get_data_length();
+          size_t out_len = 4 * ((len + 2) / 3);
+          char *buf = (char *)malloc(out_len + 1);
+          if (!buf) return;
+
+          static const char b64[] =
+            "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
+          size_t j = 0;
+          for (size_t i = 0; i < len; i += 3) {
+            uint32_t b = ((uint32_t)data[i] << 16);
+            if (i + 1 < len) b |= ((uint32_t)data[i + 1] << 8);
+            if (i + 2 < len) b |= data[i + 2];
+            buf[j++] = b64[(b >> 18) & 0x3F];
+            buf[j++] = b64[(b >> 12) & 0x3F];
+            buf[j++] = (i + 1 < len) ? b64[(b >> 6) & 0x3F] : '=';
+            buf[j++] = (i + 2 < len) ? b64[b & 0x3F] : '=';
+          }
+          buf[j] = '\0';
+
+          id(mqtt_client).publish("litter_box/camera/image", buf);
+          ESP_LOGI("capture", "Published image (%d bytes raw, %d base64)", len, j);
+          id(status_message).publish_state("Image sent for analysis");
+          free(buf);
+
+# Web server for manual viewing
+esp32_camera_web_server:
+  - port: 8080
+    mode: stream
+  - port: 8081
+    mode: snapshot
+
+# -----------------------------------------------------------------------------
+# GPIO Outputs
+# -----------------------------------------------------------------------------
+output:
+  - id: led_status
+    platform: gpio
+    pin: GPIO3
+  
+  - id: ir_led
+    platform: gpio
+    pin: GPIO47
+  
+  - id: speaker_gain
+    platform: gpio
+    pin: GPIO41
+  
+  - id: speaker_mode
+    platform: gpio
+    pin: GPIO40
+
+# -----------------------------------------------------------------------------
+# Lights
+# -----------------------------------------------------------------------------
+light:
+  - platform: binary
+    name: "Status LED"
+    id: status_led
+    output: led_status
+  
+  - platform: binary
+    name: "IR Night Vision"
+    id: ir_night_vision
+    output: ir_led
+    restore_mode: RESTORE_DEFAULT_OFF
+
+# -----------------------------------------------------------------------------
+# Binary Sensors
+# -----------------------------------------------------------------------------
+binary_sensor:
+  - platform: template
+    name: "Motion Detected"
+    id: motion_detected
+    device_class: motion
+  
+  - platform: template
+    name: "Needs Scooping"
+    id: needs_scooping_sensor
+    device_class: problem
+    icon: "mdi:shovel"
+  
+  - platform: template
+    name: "Litter Level Low"
+    id: litter_level_low_sensor
+    device_class: problem
+    icon: "mdi:cup-outline"
+  
+  - platform: template
+    name: "Cat Present"
+    id: cat_present_sensor
+    device_class: occupancy
+    icon: "mdi:cat"
+
+# -----------------------------------------------------------------------------
+# Sensors
+# -----------------------------------------------------------------------------
+sensor:
+  - platform: wifi_signal
+    name: "WiFi Signal"
+    update_interval: 60s
+  
+  - platform: template
+    name: "Cleanliness Score"
+    id: cleanliness_score_sensor
+    unit_of_measurement: "%"
+    icon: "mdi:star"
+    accuracy_decimals: 0
+  
+  - platform: template
+    name: "Daily Cat Visits"
+    id: cat_visits_sensor
+    icon: "mdi:paw"
+    accuracy_decimals: 0
+  
+  - platform: template
+    name: "Last Analysis"
+    id: last_analysis_time
+    device_class: timestamp
+    icon: "mdi:clock-outline"
+
+# -----------------------------------------------------------------------------
+# Text Sensors
+# -----------------------------------------------------------------------------
+text_sensor:
+  - platform: version
+    name: "ESPHome Version"
+  
+  - platform: template
+    name: "Status Message"
+    id: status_message
+    icon: "mdi:message-text"
+
+# -----------------------------------------------------------------------------
+# Switches
+# -----------------------------------------------------------------------------
+switch:
+  - platform: restart
+    name: "Restart Camera"
+  
+  - platform: template
+    name: "Auto Capture Enabled"
+    id: auto_capture_enabled
+    optimistic: true
+    restore_mode: RESTORE_DEFAULT_ON
+
+# -----------------------------------------------------------------------------
+# Buttons
+# -----------------------------------------------------------------------------
+button:
+  - platform: template
+    name: "Capture Now"
+    icon: "mdi:camera"
+    on_press:
+      - script.execute: capture_image_script
+
+# -----------------------------------------------------------------------------
+# Scripts
+# -----------------------------------------------------------------------------
+script:
+  - id: capture_image_script
+    mode: single
+    then:
+      - lambda: 'ESP_LOGI("capture", "Capturing image...");'
+      - light.turn_on: status_led
+      - delay: 200ms
+      - lambda: |-
+          id(publish_next_image) = true;
+          id(litter_cam).request_image(esphome::esp32_camera::SINGLE_SHOT);
+      - light.turn_off: status_led
+      - lambda: 'id(motion_cooldown_active) = true;'
+      - delay: 30s
+      - lambda: 'id(motion_cooldown_active) = false;'
--- a/esphome/master_bedroom_remote.yaml
+++ b/esphome/master_bedroom_remote.yaml
@@ -0,0 +1,293 @@
+substitutions:
+  name: mbr-ha-remote
+  friendly_name: "MBR HA Remote"
+
+  # Home Assistant entity IDs - UPDATE THESE TO MATCH YOUR SETUP
+  light_1_entity: switch.pollys_light
+  light_2_entity: switch.joshuas_light
+  fan_entity: switch.parents_ceiling_fan
+
+esphome:
+  name: ${name}
+  friendly_name: ${friendly_name}
+  on_boot:
+    priority: -100
+    then:
+      - lambda: |-
+          id(last_interaction_ms) = millis();
+          id(backlight_is_on) = true;
+      - component.update: my_display
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+logger:
+
+api:
+  encryption:
+    key: !secret api_encryption_key
+
+ota:
+  platform: esphome
+  password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  ap:
+    ssid: "${name} Fallback"
+    password: !secret wifi_password
+
+captive_portal:
+
+# SPI for display and touchscreen (CYD uses two separate SPI buses)
+spi:
+  - id: tft_spi
+    clk_pin: GPIO14
+    mosi_pin: GPIO13
+    miso_pin: GPIO12
+  - id: touch_spi
+    clk_pin: GPIO25
+    mosi_pin: GPIO32
+    miso_pin: GPIO39
+
+# ILI9341 Display (2.8" 320x240)
+display:
+  - platform: ili9xxx
+    model: ili9341
+    spi_id: tft_spi
+    cs_pin: GPIO15
+    dc_pin: GPIO2
+    dimensions:
+      width: 320
+      height: 240
+    # Use palette mode to lower display buffer memory usage.
+    color_palette: 8BIT
+    data_rate: 20MHz
+    update_interval: never
+    rotation: 0
+    invert_colors: false
+    id: my_display
+    lambda: |-
+      it.fill(Color(0x1A1A2E));
+
+      it.print(160, 20, id(title_font), Color(0xFFFFFF), TextAlign::TOP_CENTER, "Room Remote");
+
+      // Button 1: All Toggle (top-left)
+      if (id(all_state)) {
+        it.filled_rectangle(20, 50, 130, 80, Color(0x4CAF50));
+      } else {
+        it.filled_rectangle(20, 50, 130, 80, Color(0x424242));
+      }
+      it.print(85, 90, id(button_font), Color(0xFFFFFF), TextAlign::CENTER, "Toggle All");
+
+      // Button 2: Light 1 (top-right)
+      if (id(light1_state)) {
+        it.filled_rectangle(170, 50, 130, 80, Color(0x4CAF50));
+      } else {
+        it.filled_rectangle(170, 50, 130, 80, Color(0x424242));
+      }
+      it.print(235, 90, id(button_font), Color(0xFFFFFF), TextAlign::CENTER, "Polly's Light");
+
+      // Button 3: Light 2 (bottom-left)
+      if (id(light2_state)) {
+        it.filled_rectangle(20, 150, 130, 80, Color(0x4CAF50));
+      } else {
+        it.filled_rectangle(20, 150, 130, 80, Color(0x424242));
+      }
+      it.print(85, 190, id(button_font), Color(0xFFFFFF), TextAlign::CENTER, "Joshua's Light");
+
+      // Button 4: Fan (bottom-right)
+      if (id(fan_state)) {
+        it.filled_rectangle(170, 150, 130, 80, Color(0x4CAF50));
+      } else {
+        it.filled_rectangle(170, 150, 130, 80, Color(0x424242));
+      }
+      it.print(235, 190, id(button_font), Color(0xFFFFFF), TextAlign::CENTER, "Ceiling Fan");
+
+# XPT2046 Touchscreen
+touchscreen:
+  - platform: xpt2046
+    spi_id: touch_spi
+    cs_pin: GPIO33
+    interrupt_pin: GPIO36
+    calibration:
+      x_min: 280
+      x_max: 3860
+      y_min: 340
+      y_max: 3860
+    on_touch:
+      - lambda: |-
+          uint32_t now = millis();
+          id(last_interaction_ms) = now;
+
+          // Wake backlight on first touch only, don't also trigger a button
+          if (!id(backlight_is_on)) {
+            auto call = id(backlight).turn_on();
+            call.perform();
+            id(backlight_is_on) = true;
+            id(last_button_press_ms) = now;
+            return;
+          }
+
+          // Debounce: ignore repeated touch events within 600ms
+          if ((uint32_t)(now - id(last_button_press_ms)) < 600) return;
+          id(last_button_press_ms) = now;
+
+          ESP_LOGD("touch", "Touch at x=%d, y=%d", touch.x, touch.y);
+
+          // Button 1: Toggle All (top-left)
+          if (touch.x >= 20 && touch.x <= 150 && touch.y >= 50 && touch.y <= 130) {
+            ESP_LOGD("touch", "Toggle All pressed");
+            id(light1_state) = !id(light1_state);
+            id(light2_state) = !id(light2_state);
+            id(fan_state) = !id(fan_state);
+            id(all_state) = id(light1_state) && id(light2_state) && id(fan_state);
+            id(svc_toggle_all).execute();
+
+          // Button 2: Polly's Light (top-right)
+          } else if (touch.x >= 170 && touch.x <= 300 && touch.y >= 50 && touch.y <= 130) {
+            ESP_LOGD("touch", "Polly's Light pressed");
+            id(light1_state) = !id(light1_state);
+            id(all_state) = id(light1_state) && id(light2_state) && id(fan_state);
+            id(svc_toggle_polly).execute();
+
+          // Button 3: Joshua's Light (bottom-left)
+          } else if (touch.x >= 20 && touch.x <= 150 && touch.y >= 150 && touch.y <= 230) {
+            ESP_LOGD("touch", "Joshua's Light pressed");
+            id(light2_state) = !id(light2_state);
+            id(all_state) = id(light1_state) && id(light2_state) && id(fan_state);
+            id(svc_toggle_joshua).execute();
+
+          // Button 4: Ceiling Fan (bottom-right)
+          } else if (touch.x >= 170 && touch.x <= 300 && touch.y >= 150 && touch.y <= 230) {
+            ESP_LOGD("touch", "Ceiling Fan pressed");
+            id(fan_state) = !id(fan_state);
+            id(all_state) = id(light1_state) && id(light2_state) && id(fan_state);
+            id(svc_toggle_fan).execute();
+          }
+
+          id(my_display).update();
+
+# Backlight control
+output:
+  - platform: ledc
+    pin: GPIO21
+    id: backlight_output
+
+light:
+  - platform: monochromatic
+    output: backlight_output
+    name: "Display Backlight"
+    id: backlight
+    restore_mode: ALWAYS_ON
+
+# Fonts
+font:
+  - file: "gfonts://Nunito"
+    id: title_font
+    size: 24
+  - file: "gfonts://Nunito"
+    id: button_font
+    size: 20
+
+# Scripts to call HA services (lambdas can't call homeassistant.service directly)
+script:
+  - id: svc_toggle_all
+    then:
+      - homeassistant.service:
+          service: switch.toggle
+          data:
+            entity_id: ${light_1_entity}
+      - homeassistant.service:
+          service: switch.toggle
+          data:
+            entity_id: ${light_2_entity}
+      - homeassistant.service:
+          service: switch.toggle
+          data:
+            entity_id: ${fan_entity}
+  - id: svc_toggle_polly
+    then:
+      - homeassistant.service:
+          service: switch.toggle
+          data:
+            entity_id: ${light_1_entity}
+  - id: svc_toggle_joshua
+    then:
+      - homeassistant.service:
+          service: switch.toggle
+          data:
+            entity_id: ${light_2_entity}
+  - id: svc_toggle_fan
+    then:
+      - homeassistant.service:
+          service: switch.toggle
+          data:
+            entity_id: ${fan_entity}
+
+# Global state tracking
+globals:
+  - id: all_state
+    type: bool
+    initial_value: "false"
+  - id: light1_state
+    type: bool
+    initial_value: "false"
+  - id: light2_state
+    type: bool
+    initial_value: "false"
+  - id: fan_state
+    type: bool
+    initial_value: "false"
+  - id: last_interaction_ms
+    type: uint32_t
+    initial_value: "0"
+  - id: last_button_press_ms
+    type: uint32_t
+    initial_value: "0"
+  - id: backlight_is_on
+    type: bool
+    initial_value: "true"
+
+# Backlight timeout
+interval:
+  - interval: 100ms
+    then:
+      - if:
+          condition:
+            lambda: 'return id(backlight_is_on) && ((uint32_t)(millis() - id(last_interaction_ms)) > 30000);'
+          then:
+            - light.turn_off: backlight
+            - lambda: 'id(backlight_is_on) = false;'
+
+# Import states from Home Assistant
+text_sensor:
+  - platform: homeassistant
+    entity_id: ${light_1_entity}
+    id: ha_light1_state
+    on_value:
+      then:
+        - lambda: 'id(light1_state) = (x == "on");'
+        - lambda: 'id(all_state) = id(light1_state) && id(light2_state) && id(fan_state);'
+        - component.update: my_display
+
+  - platform: homeassistant
+    entity_id: ${light_2_entity}
+    id: ha_light2_state
+    on_value:
+      then:
+        - lambda: 'id(light2_state) = (x == "on");'
+        - lambda: 'id(all_state) = id(light1_state) && id(light2_state) && id(fan_state);'
+        - component.update: my_display
+
+  - platform: homeassistant
+    entity_id: ${fan_entity}
+    id: ha_fan_state
+    on_value:
+      then:
+        - lambda: 'id(fan_state) = (x == "on");'
+        - lambda: 'id(all_state) = id(light1_state) && id(light2_state) && id(fan_state);'
+        - component.update: my_display
--- a/esphome/spi_helper.h
+++ b/esphome/spi_helper.h
@@ -0,0 +1,3 @@
+#pragma once
+#include "driver/spi_master.h"
+#include "driver/gpio.h"
--- a/esphome/voice-assistant-1.yaml
+++ b/esphome/voice-assistant-1.yaml
@@ -16,7 +16,6 @@ esphome:
            switch.is_off: mute
          then:
            - micro_wake_word.start:
-
 esp32:
  board: esp32-s3-devkitc-1
  framework:
@@ -24,7 +23,7 @@ esp32:

 # Enable logging
 logger:
-  level: WARN
+  level: DEBUG

 # Enable Home Assistant API
 api:
@@ -59,7 +58,7 @@ light:
    rgb_order: GRB
    chipset: ws2812
    pin: GPIO16
-    num_leds: 4
+    num_leds: 8
    name: "LED bar"
    effects:
      - pulse:
@@ -72,6 +71,23 @@ light:
          move_interval: 100ms
          scan_width: 1

+number:
+  - platform: template
+    id: va_volume_percent
+    name: "VA Speaker Volume"
+    min_value: 10
+    max_value: 100
+    step: 5
+    unit_of_measurement: "%"
+    mode: slider
+    optimistic: true
+    restore_value: true
+    initial_value: 80
+    set_action:
+      - speaker.volume_set:
+          id: va_speaker
+          volume: !lambda "return x / 100.0f;"
+
 switch:
  - platform: template
    id: mute
@@ -150,6 +166,7 @@ micro_wake_word:
    - model: hey_jarvis
  on_wake_word_detected:
    - voice_assistant.start:
+        wake_word: "Hey Jarvis"
    - light.turn_on:
        id: led_ww
        red: 100%
@@ -162,9 +179,10 @@ voice_assistant:
  id: va
  microphone: va_mic
  speaker: va_speaker
+  use_wake_word: false
  noise_suppression_level: 2.0
  auto_gain: 31dBFS
-  volume_multiplier: 4.0
+  volume_multiplier: 8.0
  on_client_connected:
    - if:
        condition:
@@ -178,11 +196,23 @@ voice_assistant:
    then:
      - light.turn_off: led_ww
  on_error:
-    - micro_wake_word.start:
+    - light.turn_on:
+        id: led_ww
+        red: 100%
+        green: 0%
+        blue: 0%
+        brightness: 30%
+        effect: fast pulse
+    - delay: 1s
+    - light.turn_off: led_ww
  on_end:
    then:
      - light.turn_off: led_ww
      - wait_until:
          not:
            voice_assistant.is_running:
+      - if:
+          condition:
+            switch.is_off: mute
+          then:
            - micro_wake_word.start:
--- a/packages/chore-tracker-ha.yaml
+++ b/packages/chore-tracker-ha.yaml
@@ -3,8 +3,8 @@
 # Kids: Jordyn, Declan, Chloe
 #
 # BIDIRECTIONAL SYNC:
-#   Screen → HA:  Each switch calls homeassistant.service on toggle
-#   HA → Screen:  ESPHome native API handles this automatically
+#   Screen to HA:  Each switch calls homeassistant.service on toggle
+#   HA to Screen:  ESPHome native API handles this automatically
 ################################################################################

 input_button:
@@ -27,163 +27,127 @@ template:
        unique_id: jordyn_chores_done_today
        icon: mdi:check-circle
        state: >
-          {% set chores = [states('switch.chore_tracker_jordyn_make_bed'), states('switch.chore_tracker_jordyn_brush_teeth'), states('switch.chore_tracker_jordyn_tidy_room'), states('switch.chore_tracker_jordyn_homework'), states('switch.chore_tracker_jordyn_feed_dog')] %}
+          {% set chores = [states('switch.chore_tracker_jordyn_put_on_underwear'), states('switch.chore_tracker_jordyn_brush_teeth'), states('switch.chore_tracker_jordyn_fill_water_bowls'), states('switch.chore_tracker_jordyn_restock_cat_food_cans')] %}
          {{ chores | select('equalto', 'on') | list | count }}

      - name: "Jordyn All Chores Done"
        unique_id: jordyn_all_chores_done
        icon: mdi:check-all
        state: >
-          {{ states('sensor.jordyn_chores_done_today') | int == 5 }}
+          {{ states('sensor.jordyn_chores_done_today') | int == 4 }}

      - name: "Declan Chores Done Today"
        unique_id: declan_chores_done_today
        icon: mdi:check-circle
        state: >
-          {% set chores = [states('switch.chore_tracker_declan_make_bed'), states('switch.chore_tracker_declan_brush_teeth'), states('switch.chore_tracker_declan_set_table'), states('switch.chore_tracker_declan_take_out_trash')] %}
+          {% set chores = [states('switch.chore_tracker_declan_take_morning_pill'), states('switch.chore_tracker_declan_scoop_dog_poop')] %}
          {{ chores | select('equalto', 'on') | list | count }}

      - name: "Declan All Chores Done"
        unique_id: declan_all_chores_done
        icon: mdi:check-all
        state: >
-          {{ states('sensor.declan_chores_done_today') | int == 4 }}
+          {{ states('sensor.declan_chores_done_today') | int == 2 }}

      - name: "Chloe Chores Done Today"
        unique_id: chloe_chores_done_today
        icon: mdi:check-circle
        state: >
-          {% set chores = [states('switch.chore_tracker_chloe_make_bed'), states('switch.chore_tracker_chloe_brush_teeth'), states('switch.chore_tracker_chloe_water_plants'), states('switch.chore_tracker_chloe_homework'), states('switch.chore_tracker_chloe_tidy_room'), states('switch.chore_tracker_chloe_practice_piano')] %}
+          {% set chores = [states('switch.chore_tracker_chloe_fill_kitty_feeders'), states('switch.chore_tracker_chloe_scoop_kitty_litter'), states('switch.chore_tracker_chloe_replace_kitty_litter_bags')] %}
          {{ chores | select('equalto', 'on') | list | count }}

      - name: "Chloe All Chores Done"
        unique_id: chloe_all_chores_done
        icon: mdi:check-all
        state: >
-          {{ states('sensor.chloe_chores_done_today') | int == 6 }}
+          {{ states('sensor.chloe_chores_done_today') | int == 3 }}


 automation:
  - id: jordyn_reset_from_ha
-    alias: "Chore Tracker — Reset Jordyn's chores from HA"
+    alias: "Chore Tracker - Reset Jordyn's chores from HA"
    trigger:
      - platform: state
        entity_id: input_button.jordyn_reset_chores
    action:
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_jordyn_make_bed
+          entity_id: switch.chore_tracker_jordyn_put_on_underwear
      - service: switch.turn_off
        target:
          entity_id: switch.chore_tracker_jordyn_brush_teeth
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_jordyn_tidy_room
+          entity_id: switch.chore_tracker_jordyn_fill_water_bowls
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_jordyn_homework
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_jordyn_feed_dog
+          entity_id: switch.chore_tracker_jordyn_restock_cat_food_cans

  - id: declan_reset_from_ha
-    alias: "Chore Tracker — Reset Declan's chores from HA"
+    alias: "Chore Tracker - Reset Declan's chores from HA"
    trigger:
      - platform: state
        entity_id: input_button.declan_reset_chores
    action:
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_declan_make_bed
+          entity_id: switch.chore_tracker_declan_take_morning_pill
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_declan_brush_teeth
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_declan_set_table
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_declan_take_out_trash
+          entity_id: switch.chore_tracker_declan_scoop_dog_poop

  - id: chloe_reset_from_ha
-    alias: "Chore Tracker — Reset Chloe's chores from HA"
+    alias: "Chore Tracker - Reset Chloe's chores from HA"
    trigger:
      - platform: state
        entity_id: input_button.chloe_reset_chores
    action:
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_chloe_make_bed
+          entity_id: switch.chore_tracker_chloe_fill_kitty_feeders
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_chloe_brush_teeth
+          entity_id: switch.chore_tracker_chloe_scoop_kitty_litter
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_chloe_water_plants
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_chloe_homework
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_chloe_tidy_room
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_chloe_practice_piano
+          entity_id: switch.chore_tracker_chloe_replace_kitty_litter_bags

  - id: reset_all_from_ha
-    alias: "Chore Tracker — Reset ALL chores from HA"
+    alias: "Chore Tracker - Reset ALL chores from HA"
    trigger:
      - platform: state
        entity_id: input_button.reset_all_chores
    action:
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_jordyn_make_bed
+          entity_id: switch.chore_tracker_jordyn_put_on_underwear
      - service: switch.turn_off
        target:
          entity_id: switch.chore_tracker_jordyn_brush_teeth
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_jordyn_tidy_room
+          entity_id: switch.chore_tracker_jordyn_fill_water_bowls
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_jordyn_homework
+          entity_id: switch.chore_tracker_jordyn_restock_cat_food_cans
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_jordyn_feed_dog
+          entity_id: switch.chore_tracker_declan_take_morning_pill
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_declan_make_bed
+          entity_id: switch.chore_tracker_declan_scoop_dog_poop
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_declan_brush_teeth
+          entity_id: switch.chore_tracker_chloe_fill_kitty_feeders
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_declan_set_table
+          entity_id: switch.chore_tracker_chloe_scoop_kitty_litter
      - service: switch.turn_off
        target:
-          entity_id: switch.chore_tracker_declan_take_out_trash
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_chloe_make_bed
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_chloe_brush_teeth
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_chloe_water_plants
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_chloe_homework
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_chloe_tidy_room
-      - service: switch.turn_off
-        target:
-          entity_id: switch.chore_tracker_chloe_practice_piano
+          entity_id: switch.chore_tracker_chloe_replace_kitty_litter_bags

  - id: jordyn_all_done_notify
-    alias: "Chore Tracker — Jordyn all done!"
+    alias: "Chore Tracker - Jordyn all done!"
    trigger:
      - platform: state
        entity_id: sensor.jordyn_all_chores_done
@@ -191,11 +155,11 @@ automation:
    action:
      - service: notify.notify
        data:
-          title: "🎉 Jordyn finished all chores!"
-          message: "Jordyn completed all 5 chores today!"
+          title: "Jordyn finished all chores!"
+          message: "Jordyn completed all 4 chores today!"

  - id: declan_all_done_notify
-    alias: "Chore Tracker — Declan all done!"
+    alias: "Chore Tracker - Declan all done!"
    trigger:
      - platform: state
        entity_id: sensor.declan_all_chores_done
@@ -203,11 +167,11 @@ automation:
    action:
      - service: notify.notify
        data:
-          title: "🎉 Declan finished all chores!"
-          message: "Declan completed all 4 chores today!"
+          title: "Declan finished all chores!"
+          message: "Declan completed all 2 chores today!"

  - id: chloe_all_done_notify
-    alias: "Chore Tracker — Chloe all done!"
+    alias: "Chore Tracker - Chloe all done!"
    trigger:
      - platform: state
        entity_id: sensor.chloe_all_chores_done
@@ -215,11 +179,11 @@ automation:
    action:
      - service: notify.notify
        data:
-          title: "🎉 Chloe finished all chores!"
-          message: "Chloe completed all 6 chores today!"
+          title: "Chloe finished all chores!"
+          message: "Chloe completed all 3 chores today!"

  - id: chore_reminder_evening
-    alias: "Chore Tracker — Evening reminder"
+    alias: "Chore Tracker - Evening reminder"
    trigger:
      - platform: time
        at: "18:00:00"
@@ -230,29 +194,29 @@ automation:
        then:
          - service: notify.notify
            data:
-              title: "📋 Jordyn has unfinished chores"
+              title: "Jordyn has unfinished chores"
              message: >
                Jordyn has done
-                {{ states('sensor.jordyn_chores_done_today') }}/5 chores today.
+                {{ states('sensor.jordyn_chores_done_today') }}/4 chores today.
      - if:
          condition: template
          value_template: "{{ states('sensor.declan_all_chores_done') != 'True' }}"
        then:
          - service: notify.notify
            data:
-              title: "📋 Declan has unfinished chores"
+              title: "Declan has unfinished chores"
              message: >
                Declan has done
-                {{ states('sensor.declan_chores_done_today') }}/4 chores today.
+                {{ states('sensor.declan_chores_done_today') }}/2 chores today.
      - if:
          condition: template
          value_template: "{{ states('sensor.chloe_all_chores_done') != 'True' }}"
        then:
          - service: notify.notify
            data:
-              title: "📋 Chloe has unfinished chores"
+              title: "Chloe has unfinished chores"
              message: >
                Chloe has done
-                {{ states('sensor.chloe_chores_done_today') }}/6 chores today.
+                {{ states('sensor.chloe_chores_done_today') }}/3 chores today.
Author	SHA1	Message	Date
Joshua King	c1934f3806	Update display initialization comments for clarity and accuracy	2026-03-07 08:40:16 -05:00
Joshua King	38b3ab8f56	Fix display orientation settings for correct portrait mode	2026-03-07 08:34:06 -05:00
Joshua King	a0e2687bf5	Fix display orientation settings for correct portrait mode	2026-03-07 08:17:59 -05:00
Joshua King	c95ad4cd2c	Change display rotation from 180 to 0 degrees for correct orientation	2026-03-07 08:02:00 -05:00
Joshua King	d32f26da94	Update ILI9488 display rotation to 180 degrees for correct orientation	2026-03-06 21:38:41 -05:00
Joshua King	a4700b673e	Refactor SPI handling in cat-medication-tracker to use ESP-IDF API for improved performance and reliability	2026-03-06 21:34:11 -05:00
Joshua King	3bd797bcc5	Refactor ESPHome configuration to include SPI.h via spi_helper.h	2026-03-06 21:28:10 -05:00
Joshua King	1a486240a0	Add SPI.h include to platformio build flags for ESPHome configuration	2026-03-06 21:22:23 -05:00
Joshua King	ef0841de3f	Fix display orientation and update MADCTL settings for correct portrait mode	2026-03-06 21:17:53 -05:00
Joshua King	6434885ee9	Update ILI9488 display rotation to 180 degrees for correct orientation	2026-03-06 21:07:14 -05:00
Joshua King	72cc7c4524	Update ILI9488 display rotation to correct orientation	2026-03-06 21:04:49 -05:00
Joshua King	ed17ec0a4d	Update ILI9488 display initialization to correct portrait orientation	2026-03-06 20:56:47 -05:00
Joshua King	a8537e087c	Fix horizontal mirroring for ILI9488 display by updating MADCTL command handling	2026-03-06 20:45:08 -05:00
Joshua King	82ba5d420c	Fix horizontal mirroring for ILI9488 display by updating MADCTL settings and resetting rotation to 0	2026-03-06 20:32:08 -05:00
Joshua King	a2eb2b6106	Update display rotation for ILI9488 to 180 degrees in Cat Medication Tracker	2026-03-06 20:21:57 -05:00
Joshua King	34c92deb26	Update display rotation for ILI9488 in Cat Medication Tracker	2026-03-06 20:18:07 -05:00
Joshua King	560449b1c3	Remove horizontal mirroring for ILI9488 display in Cat Medication Tracker	2026-03-06 16:22:09 -05:00
Joshua King	9e2b0b108c	Enable horizontal mirroring for ILI9488 display in Cat Medication Tracker	2026-03-06 16:05:42 -05:00
Joshua King	653d708b78	Remove horizontal mirroring fix for ILI9488 display from update script	2026-03-06 15:54:26 -05:00
Joshua King	56a378f783	Fix horizontal mirroring for ILI9488 display by overriding MADCTL command	2026-03-06 15:48:09 -05:00
Joshua King	812c3fd820	Fix horizontal mirroring for ILI9488 display and update display configuration	2026-03-06 15:28:43 -05:00
Joshua King	cced711c68	Update display configuration to use ili9xxx platform and adjust rotation and mirroring settings	2026-03-06 15:22:09 -05:00
Joshua King	0569620c6c	Update display rotation to 180 degrees and disable horizontal mirroring in Cat Medication Tracker	2026-03-06 15:12:30 -05:00
Joshua King	d75297fde4	Enable horizontal mirroring for display in Cat Medication Tracker	2026-03-06 14:56:49 -05:00
Joshua King	5d761acf69	Remove reset duration from display configuration and update backlight GPIO pin in Cat Medication Tracker	2026-03-06 14:42:13 -05:00
Joshua King	fd0d061f96	Update display configuration for improved stability and adjust backlight settings in Cat Medication Tracker	2026-03-06 14:26:43 -05:00
Joshua King	c684ecba49	Refactor display initialization and update configuration for improved stability in Cat Medication Tracker	2026-03-06 14:14:14 -05:00
Joshua King	1b8ec2f489	Add touchscreen support and medication control buttons in Cat Medication Tracker	2026-03-06 14:08:12 -05:00
Joshua King	495224d3eb	Refactor display configuration and reduce data rate to enhance stability in Cat Medication Tracker	2026-03-06 14:05:07 -05:00
Joshua King	eea8f239fa	Set display data rate to 20MHz for optimal performance in Cat Medication Tracker	2026-03-06 13:52:42 -05:00
Joshua King	6dcab86122	Refactor backlight control and update display configuration in Cat Medication Tracker	2026-03-06 13:50:48 -05:00
Joshua King	7d332586ea	Adjust display data rate to 20MHz and invert backlight control in Cat Medication Tracker configuration	2026-03-06 13:37:29 -05:00
Joshua King	2220cec970	Change ESP32 framework type from esp-idf to arduino in Cat Medication Tracker configuration	2026-03-06 13:25:41 -05:00
Joshua King	ee85f43a92	Update color depth for display in Cat Medication Tracker to enhance visual quality	2026-03-06 13:11:56 -05:00
Joshua King	3a0d7da7f6	Add notes on PSRAM usage and display buffer strategy for ESP32-32E	2026-03-06 12:45:44 -05:00
Joshua King	31aaab69b7	Update display configuration in Cat Medication Tracker: change display platform to mipi_spi and adjust color depth and buffer size	2026-03-06 12:43:47 -05:00
Joshua King	a41523a7ac	Enable PSRAM support for enhanced TFT framebuffer usage in Cat Medication Tracker	2026-03-06 11:58:41 -05:00
Joshua King	71f35fe822	Add image publishing functionality to Litter Box Camera: implement base64 encoding and MQTT publishing on image capture	2026-03-06 08:55:37 -05:00
Joshua King	6dd6e39c04	Update display configuration for Cat Medication Tracker: change model to ILI9488 and adjust dimensions and button placements	2026-03-06 08:49:02 -05:00
Joshua King	01e02033f6	Fix MQTT client ID configuration in Litter Box Camera setup	2026-03-05 16:39:00 -05:00
Joshua King	be876dc24d	Add MQTT client ID configuration to Litter Box Camera setup	2026-03-05 16:36:36 -05:00
Joshua King	9b86dca27e	Add Litter Box Camera configuration for ESP32-S3 with camera and sensor integration	2026-03-05 16:32:49 -05:00
Joshua King	b1bb0deb0e	Refactor boot sequence: adjust on_boot priority and delay for backlight; change display update interval to 2s; set logger level to DEBUG	2026-03-04 20:30:51 -05:00
Joshua King	f32acd86e4	Refactor boot sequence: adjust on_boot actions for backlight and display update; change display update interval to never; update backlight control to use GPIO	2026-03-04 20:20:30 -05:00
Joshua King	45c9186f25	Refactor boot sequence: remove boot_test_mode global variable; simplify backlight control and update display logic	2026-03-04 20:02:55 -05:00
Joshua King	ccb50f1c37	Enhance boot sequence: add boot_test_mode global variable; adjust backlight delay and update display logic for test mode	2026-03-04 19:58:19 -05:00
Joshua King	0c3f065f64	Refactor boot sequence: update display component on boot and adjust touchscreen settings; set display update interval to 2s	2026-03-04 19:51:11 -05:00
Joshua King	eadb67b2fc	Enhance boot sequence: turn on backlight and execute display update script; adjust touchscreen update interval to 100ms	2026-03-04 19:44:45 -05:00
Joshua King	a9b9559c23	Update touchscreen configuration: change interrupt_pin to update_interval	2026-03-04 19:18:17 -05:00
Joshua King	487f3f0207	Add color_palette setting to display configuration	2026-03-04 18:27:29 -05:00
Joshua King	7ad2a7b498	Remove draw_from_origin setting from display configuration	2026-03-04 18:19:58 -05:00
Joshua King	2681623838	Update ESP32 framework type to esp-idf and enable drawing from origin in display configuration	2026-03-04 18:17:48 -05:00
Joshua King	57f5745afe	Remove unnecessary buffer_type setting from display configuration	2026-03-04 18:08:57 -05:00
Joshua King	039c3a901c	Fix WiFi configuration: Update SSID to use correct secret and remove unnecessary settings; Enhance display configuration: Adjust color order, data rate, and buffer type	2026-03-04 18:05:23 -05:00
Joshua King	dd0b85137f	Fix WiFi configuration: Update SSID to use correct secret and adjust fallback password settings	2026-03-04 17:37:54 -05:00
Joshua King	f0c41a6fdc	Fix WiFi configuration: Update SSID to use correct secret and streamline fallback password	2026-03-04 17:29:30 -05:00
Joshua King	58e4ca6c03	Enhance touchscreen functionality: Add buttons for medication control and simplify touch event handling	2026-03-04 17:23:41 -05:00
Joshua King	4aecb61673	Enhance touchscreen handling: Add threshold for touch sensitivity and filter out phantom touches to improve accuracy	2026-03-04 17:16:44 -05:00
Joshua King	72f03f9045	Fix WiFi fallback password and update display configuration: Change fallback password to secret and disable color inversion	2026-03-04 17:06:50 -05:00
Joshua King	c43a3767dd	Add Cat Medication Tracker configuration: Implement display, touchscreen, and medication state management	2026-03-04 17:04:06 -05:00
Joshua King	240fe06229	Enhance touchscreen handling: Implement backlight control on first touch and debounce touch events to improve responsiveness	2026-03-02 21:39:09 -05:00
Joshua King	0acf0ab8bf	Refactor touchscreen button handling: Simplify button logic and implement service calls for light and fan control	2026-03-02 20:18:14 -05:00
Joshua	d56fa9d393	updates	2026-03-02 20:14:22 -05:00
Joshua King	9cdc4ecba0	Refactor fan control configuration: Fix GPIO pin inversion, add fan IDs, and implement a switch for controlling all fans	2026-03-02 14:36:42 -05:00
root	8aa8ed3273	Merge branch 'main' of ssh://code.cubecraftcreations.com:2288/overseer/Home-Assistant	2026-03-01 18:33:52 -05:00
Joshua King	ee07fa4ff7	Refactor volume control: Add volume slider for speaker and adjust volume multiplier for improved audio management	2026-03-01 18:33:23 -05:00
root	9ccd19cc45	Merge branch 'main' of ssh://code.cubecraftcreations.com:2288/overseer/Home-Assistant	2026-03-01 17:54:42 -05:00
Joshua King	8bb8f09f64	Refactor wake word detection: Set wake word to "Hey Jarvis" and adjust light behavior on error	2026-03-01 17:54:27 -05:00
root	1937262e8f	git ignore update	2026-03-01 17:36:37 -05:00
Joshua King	9a91f775c9	Refactor logging level in voice assistant configuration: Change from WARN to DEBUG for improved troubleshooting	2026-03-01 17:32:46 -05:00
Joshua King	b976b7f133	Refactor button colors for light and fan states: Update to a consistent color scheme for better visibility	2026-03-01 08:39:34 -05:00
Joshua King	176a923b67	Refactor backlight control: Adjust on_boot priority and remove unnecessary backlight activation commands	2026-03-01 08:29:56 -05:00
Joshua King	bd845f3f8e	Refactor backlight control: Ensure backlight activation is performed correctly during touch events	2026-02-28 21:41:44 -05:00
Joshua King	71ee0ffc4f	Refactor master bedroom remote configuration: Update display button labels and implement backlight control based on user interaction	2026-02-28 21:35:58 -05:00
Joshua King	6f451bfd10	Refactor master bedroom remote configuration: Change display rotation to 0 degrees for corrected orientation	2026-02-28 21:30:11 -05:00
Joshua King	e416ebe743	Refactor display configuration: Add dimensions for the display to improve layout accuracy	2026-02-28 21:27:19 -05:00
Joshua King	8521e9bef4	Refactor display configuration: Change display rotation to 90 degrees for improved orientation	2026-02-28 21:23:52 -05:00
Joshua King	7db6976212	Refactor master bedroom remote configuration: Update display data rate and add component updates for improved responsiveness	2026-02-28 21:17:34 -05:00
Joshua King	35b501e978	Refactor master bedroom remote configuration: Change framework type to Arduino and optimize display memory usage with palette mode	2026-02-28 21:09:25 -05:00
Joshua King	7698a0b79d	Refactor SPI configuration: Update display and touchscreen SPI settings for improved clarity and functionality	2026-02-28 21:04:00 -05:00
Joshua King	d8f7786cb3	Refactor master bedroom remote configuration: Update boot sequence to initialize backlight and change display data rate for improved performance	2026-02-28 20:57:44 -05:00
Joshua King	4386f37c1b	Refactor master bedroom remote configuration: Update entity IDs and friendly names for improved setup alignment	2026-02-28 20:47:58 -05:00
Joshua King	d4214ca983	Refactor touchscreen calibration: Update calibration parameters to use a structured format for improved readability	2026-02-28 20:37:56 -05:00
Joshua King	4256550c6d	Fix WiFi fallback AP password: Update to use the correct WiFi password for fallback access point	2026-02-28 20:34:08 -05:00
Joshua King	884cf15451	Update WiFi configuration: Change SSID reference and adjust display settings for improved functionality	2026-02-28 19:52:21 -05:00
Joshua King	661b40339b	Refactor master bedroom remote configuration: Update entity IDs and improve touch event handling for enhanced functionality	2026-02-28 19:48:28 -05:00
Joshua King	5053d2662f	Update LED bar configuration: Increase number of LEDs from 4 to 8 for enhanced lighting effects	2026-02-28 19:13:29 -05:00
Joshua King	d926c3d9bf	Add master bedroom remote configuration: Implement ESPHome setup with display, touchscreen, and entity controls for lights and fan	2026-02-28 15:47:57 -05:00
Joshua King	d6c2b189ef	Refactor chore tracker UI: Adjust button dimensions, colors, and positions for improved layout and readability	2026-02-28 13:05:45 -05:00
Joshua King	338025d55b	Enhance chore tracker: Set default icons for chores without specified icons and add warnings for missing icons during generation	2026-02-28 12:48:44 -05:00
Joshua King	9b4908c39b	Refactor chore tracker: Update chore names and IDs for improved clarity and consistency	2026-02-28 11:59:20 -05:00
Joshua King	689b173f30	Refactor chore tracker configuration and update chore counts - Updated chore counts for Jordyn, Declan, and Chloe in the dashboard and configuration files. - Modified chore names and icons for Jordyn, Declan, and Chloe to reflect new tasks. - Adjusted automation scripts to align with the updated chore structure and counts. - Ensured notifications reflect the correct number of completed chores for each child.	2026-02-28 11:52:51 -05:00
Joshua King	f0d6e97cd0	Update chore tracker UI: Change button styles and icons for Jordyn, Declan, and Chloe for improved visibility and consistency.	2026-02-28 09:57:19 -05:00
Joshua King	7af2d0681c	Refactor chore tracker for kids' names and chores: Update Emma, Liam, and Zoe to Jordyn, Declan, and Chloe. Adjust YAML configurations, automation, and notifications accordingly.	2026-02-28 09:44:33 -05:00
Joshua King	b635c771ec	Refactor chore tracker for new kids: Emma, Liam, and Zoe - Updated dashboard YAML to reflect new kids and their chores. - Modified chores configuration to include new kids with appropriate icons and settings. - Adjusted generation script to handle new MDI glyphs for icons. - Revised Home Assistant integration to support new kids, including input buttons and automation for chores. - Ensured all references to old kids (Jordyn, Declan, Chloe) are replaced with new names and corresponding logic.	2026-02-28 09:41:42 -05:00
Joshua King	c2ad832a82	Refactor chore tracker configuration for improved consistency and clarity	2026-02-28 08:49:25 -05:00
Joshua King	eb88e59550	Update ESP32 board configuration to esp32-s3-devkitc-1 for consistency	2026-02-28 08:34:37 -05:00
Joshua King	c63275d484	Rename 'btn' to 'button' for consistency in chore-tracker YAML and generator script	2026-02-28 08:13:13 -05:00
Joshua King	d7ed0c085c	Update font configuration in chore-tracker YAML for improved consistency	2026-02-28 08:10:35 -05:00
Joshua King	3f697d690a	Update font files in generate.py for improved typography consistency	2026-02-28 08:09:42 -05:00
Joshua King	2474ab72b3	Whitelist fonts directory in esphome for inclusion in version control	2026-02-28 08:05:05 -05:00
Joshua King	23e39c1fe5	Refactor font configuration in chore-tracker files for consistency	2026-02-27 22:28:32 -05:00
Joshua King	617cf7d7d1	Refactor font weight configuration in chore-tracker YAML for consistency	2026-02-27 22:26:02 -05:00
Joshua King	c4ae98cab2	Refactor font configuration in chore-tracker YAML files for improved clarity and consistency	2026-02-27 22:23:43 -05:00
Joshua King	b7b78c0785	Refactor font configuration in chore-tracker YAML files for consistency	2026-02-27 22:21:50 -05:00
Joshua King	dc815af608	Refactor display pin configuration in chore-tracker YAML files for consistency	2026-02-27 22:19:26 -05:00
Joshua King	21f97a5458	Fix formatting for chore switch comments in chore-tracker configuration	2026-02-27 22:17:51 -05:00
Joshua King	d42a23dfab	Remove chore-tracker-ha.yaml configuration file and associated automations for chore tracking.	2026-02-27 22:15:50 -05:00
Joshua King	c07d58c98b	Add chore tracker configuration for kids' chores with reset buttons and notifications	2026-02-27 22:08:02 -05:00